Skip to contentSkip to conversation

u-boot couldn't be started from flash

U-Boot Robert 3 participants 4 messages Sep 26, 2008 – Sep 28, 2008

lore
Share & tools
lore

Robert

author
#0 lore raw

Hi, all

I can run u-boot in my debugger TRACE32 with 'go' command,
but it couldn't be started from the flash without TRACE32 when the board power on, and I get nothing from the console, I don't know what happend, and anybody has experience in this problem?
Thanks in advance!
Robert

#1 lore raw

Hi Robert,

Quoted 4 lines

I can run u-boot in my debugger TRACE32 with 'go' command,
but it couldn't be started from the flash without TRACE32 when the board power on, and I get nothing from the console, I don't know what happend, and anybody has experience in this problem?

It sounds like your debugger does some initialization that is missing from U-Boot. So check any init lists (or whatever it is called for TRACE32) and the startup of U-Boot and fix the discrepencies.

Cheers
Detlev

Signature · 7 lines
"Milk?" called Reg. "Er, please." "One lump or two?" "One, please." "Sugar?"

    Dirk Gently's Holistic Detective Agency, Douglas Adams
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
#2 lore raw
In reply to Robert
Quoted 6 lines · Robert

Hi, all

I can run u-boot in my debugger TRACE32 with 'go' command,
but it couldn't be started from the flash without TRACE32 when the board power on, and I get nothing from the console, I don't know what happend, and anybody has experience in this problem?

Could you give us more information on your Target?

U-Boot version, cpu, board etc...

Best Regards,
J.

author
#3 lore raw
Quoted 12 lines · Robert
Quoted 6 lines

Hi, all

I can run u-boot in my debugger TRACE32 with 'go' command,
but it couldn't be started from the flash without TRACE32 when the board power on, and I get nothing from the console, I don't know what happend, and anybody has experience in this problem?

Could you give us more information on your Target?

U-Boot version, cpu, board etc...

My board is marvell db88rc8180 , and its core is arm926ej, there are five memory chips on the board, each of them is 64M, and one of them is
used as ECC, NOR flash model and size : intel series, 16M
The u-boot version is 1.1.1, but it has been merged with marvell's own u-boot patch.

Cheers
Robert