regulator: ab3100: use devm_regulator_register()
Subsystems (4)
PATCH v2 1/18 regulator: ab3100: use devm_regulator_register()
Use devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/ab3100.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/regulator/ab3100.c +1 -2
@@ -535,7 +535,7 @@ static int ab3100_regulator_register(struct platform_device *pdev, config.dev = &pdev->dev; config.driver_data = reg; - rdev =regulator_register (desc, &config); + rdev =devm_regulator_register (&pdev->dev, desc, &config);if (IS_ERR (rdev)) { err =PTR_ERR (rdev); dev_err(&pdev->dev,
@@ -616,7 +616,6 @@ static int ab3100_regulators_remove(struct platform_device *pdev)for (i =0 ; i <AB3100_NUM_REGULATORS ; i++) {struct ab3100_regulator *reg = &ab3100_regulators[i]; -regulator_unregister (reg->rdev); reg->rdev =NULL ; }return 0 ;
Signature · 1 line
1.7.10.4
PATCH v2 2/18 regulator: ab8500-ext: use devm_regulator_register()
Use devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/ab8500-ext.c | 26 ++------------------------ 1 file changed, 2 insertions(+), 24 deletions(-)
drivers/regulator/ab8500-ext.c +2 -24
@@ -413,16 +413,12 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) &pdata->ext_regulator[i];/* register regulator with framework */ - info->rdev =regulator_register (&info->desc, &config); + info->rdev =devm_regulator_register (&pdev->dev, &info->desc, + &config);if (IS_ERR (info->rdev)) { err =PTR_ERR (info->rdev);dev_err (&pdev->dev,"failed to register regulator %s\n" , info->desc.name); -/* when we fail, un-register all earlier regulators */ -while (--i >=0 ) { - info = &ab8500_ext_regulator_info[i]; -regulator_unregister (info->rdev); - }return err; }
@@ -433,26 +429,8 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)return 0 ; } -static int ab8500_ext_regulator_remove (struct platform_device *pdev) -{ -int i; - -for (i =0 ; i <ARRAY_SIZE (ab8500_ext_regulator_info); i++) { -struct ab8500_ext_regulator_info *info =NULL ; - info = &ab8500_ext_regulator_info[i]; - -dev_vdbg (rdev_get_dev (info->rdev), -"%s-remove\n" , info->desc.name); - -regulator_unregister (info->rdev); - } - -return 0 ; -} -static struct platform_driver ab8500_ext_regulator_driver = { .probe = ab8500_ext_regulator_probe, - .remove = ab8500_ext_regulator_remove, .driver = { .name ="ab8500-ext-regulator" , .owner =THIS_MODULE ,
Signature · 1 line
1.7.10.4
PATCH v2 3/18 regulator: da9063: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/da9063-regulator.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)
drivers/regulator/da9063-regulator.c +4 -17
@@ -847,13 +847,13 @@ static int da9063_regulator_probe(struct platform_device *pdev)if (da9063_reg_matches) config.of_node = da9063_reg_matches[id].of_node; config.regmap = da9063->regmap; - regl->rdev =regulator_register (®l->desc, &config); + regl->rdev =devm_regulator_register (&pdev->dev, ®l->desc, + &config);if (IS_ERR (regl->rdev)) {dev_err (&pdev->dev,"Failed to register %s regulator\n" , regl->desc.name); - ret =PTR_ERR (regl->rdev); - goto err; +return PTR_ERR (regl->rdev); } id++; n++;
@@ -862,9 +862,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)/* LDOs overcurrent event support */ irq =platform_get_irq_byname (pdev,"LDO_LIM" );if (irq <0 ) { - ret = irq;dev_err (&pdev->dev,"Failed to get IRQ.\n" ); - goto err; +return irq; } regulators->irq_ldo_lim =regmap_irq_get_virq (da9063->regmap_irq, irq);
@@ -881,27 +880,15 @@ static int da9063_regulator_probe(struct platform_device *pdev) }return 0 ; - -err: -/* Wind back regulators registeration */ -while (--n >=0 ) -regulator_unregister (regulators->regulator[n].rdev); - -return ret; }static int da9063_regulator_remove (struct platform_device *pdev) {struct da9063_regulators *regulators =platform_get_drvdata (pdev); -struct da9063_regulator *regl;free_irq (regulators->irq_ldo_lim, regulators);free_irq (regulators->irq_uvov, regulators); -for (regl = ®ulators->regulator[regulators->n_regulators -1 ]; - regl >= ®ulators->regulator[0 ]; regl--) -regulator_unregister (regl->rdev); -return 0 ; }
Signature · 1 line
1.7.10.4
PATCH v2 4/18 regulator: da9210: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/da9210-regulator.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
drivers/regulator/da9210-regulator.c +1 -9
@@ -152,7 +152,7 @@ static int da9210_i2c_probe(struct i2c_client *i2c, config.driver_data = chip; config.regmap = chip->regmap; - rdev =regulator_register (&da9210_reg, &config); + rdev =devm_regulator_register (&i2c->dev, &da9210_reg, &config);if (IS_ERR (rdev)) {dev_err (&i2c->dev,"Failed to register DA9210 regulator\n" );return PTR_ERR (rdev);
@@ -165,13 +165,6 @@ static int da9210_i2c_probe(struct i2c_client *i2c,return 0 ; } -static int da9210_i2c_remove (struct i2c_client *i2c) -{ -struct da9210 *chip =i2c_get_clientdata (i2c); -regulator_unregister (chip->rdev); -return 0 ; -} -static const struct i2c_device_id da9210_i2c_id[] = { {"da9210" ,0 }, {},
@@ -185,7 +178,6 @@ static struct i2c_driver da9210_regulator_driver = { .owner = THIS_MODULE, }, .probe = da9210_i2c_probe, - .remove = da9210_i2c_remove, .id_table = da9210_i2c_id, };
Signature · 1 line
1.7.10.4
PATCH v2 5/18 regulator: fixed: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/fixed.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/fixed.c +2 -2
@@ -188,7 +188,8 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) cfg.driver_data = drvdata; cfg.of_node = pdev->dev.of_node; - drvdata->dev =regulator_register (&drvdata->desc, &cfg); + drvdata->dev =devm_regulator_register (&pdev->dev, &drvdata->desc, + &cfg);if (IS_ERR (drvdata->dev)) { ret =PTR_ERR (drvdata->dev);dev_err (&pdev->dev,"Failed to register regulator: %d\n" , ret);
@@ -214,7 +215,6 @@ static int reg_fixed_voltage_remove(struct platform_device *pdev) {struct fixed_voltage_data *drvdata =platform_get_drvdata (pdev); -regulator_unregister (drvdata->dev);kfree (drvdata->desc.supply_name);kfree (drvdata->desc.name);
Signature · 1 line
1.7.10.4
Re: [PATCH V2 05/18] regulator: fixed: use devm_regulator_register()
Hi Jingoo,
Quoted 7 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);- regulator_unregister(drvdata->dev); kfree(drvdata->desc.supply_name); kfree(drvdata->desc.name);
Sorry, couldn't go through all your patches yesterday. This one looks a bit scary too as some of the driver data is already freed before unregistering.
Signature · 2 lines
With warm regards, Sachin
Re: [PATCH V2 05/18] regulator: fixed: use devm_regulator_register()
Quoted 5 lines · Sachin Kamat
Quoted 4 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
Quoted 8 lines
Quoted 3 lines
- regulator_unregister(drvdata->dev); kfree(drvdata->desc.supply_name); kfree(drvdata->desc.name);Sorry, couldn't go through all your patches yesterday. This one looks a bit scary too as some of the driver data is already freed before unregistering.
I looked at regulator_unregister(). I am not sure that this is safe. So, I will remove this patch from next v3 patch series. Thank you for your comment. :-)
Best regards,
Jingoo Han
Mark Brown
maintainerRe: [PATCH V2 05/18] regulator: fixed: use devm_regulator_register()
Quoted 6 lines · Jingoo Han
Quoted 3 lines · Sachin Kamat
Quoted 3 lines
- regulator_unregister(drvdata->dev); kfree(drvdata->desc.supply_name); kfree(drvdata->desc.name);
Quoted 7 lines
Quoted 3 lines
Sorry, couldn't go through all your patches yesterday. This one looks a bit scary too as some of the driver data is already freed before unregistering.
I looked at
regulator_unregister(). I am not sure that this is safe. So, I will remove this patch from next v3 patch series. Thank you for your comment. :-)
Yes, it'd be better to convert the allocations to be managed ones first.
PATCH v2 6/18 regulator: gpio-regulator: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/gpio-regulator.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/regulator/gpio-regulator.c +2 -3
@@ -322,7 +322,8 @@ static int gpio_regulator_probe(struct platform_device *pdev) cfg.ena_gpio_flags |=GPIOF_OUT_INIT_HIGH ; } - drvdata->dev =regulator_register (&drvdata->desc, &cfg); + drvdata->dev =devm_regulator_register (&pdev->dev, &drvdata->desc, + &cfg);if (IS_ERR (drvdata->dev)) { ret =PTR_ERR (drvdata->dev);dev_err (&pdev->dev,"Failed to register regulator: %d\n" , ret);
@@ -349,8 +350,6 @@ static int gpio_regulator_remove(struct platform_device *pdev) {struct gpio_regulator_data *drvdata =platform_get_drvdata (pdev); -regulator_unregister (drvdata->dev); -gpio_free_array (drvdata->gpios, drvdata->nr_gpios);kfree (drvdata->states);
Signature · 1 line
1.7.10.4
Re: [PATCH V2 06/18] regulator: gpio-regulator: use devm_regulator_register()
drivers/regulator/gpio-regulator.c static int gpio_regulator_remove(struct platform_device *pdev) · line 355
Quoted 10 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.drivers/regulator/gpio-regulator.c +0
-2@@ -349,8 +350,6 @@ static int gpio_regulator_remove(struct platform_device *pdev) {struct gpio_regulator_data *drvdata =platform_get_drvdata (pdev); -regulator_unregister (drvdata->dev); -gpio_free_array (drvdata->gpios, drvdata->nr_gpios);kfree (drvdata->states);
In most of the cases where unregister doesn't happen to be the only or last call in the remove path,
I am not sure if change in ordering wouldn't cause any functional issues. For. e.g., in this patch we are freeing the gpios and the driver states even before unregistering the device which is logically not right.
Signature · 2 lines
With warm regards, Sachin
Re: [PATCH V2 06/18] regulator: gpio-regulator: use devm_regulator_register()
Quoted 10 lines · Sachin Kamat
Quoted 9 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.drivers/regulator/gpio-regulator.c +0
-2@@ -349,8 +350,6 @@ static int gpio_regulator_remove(struct platform_device *pdev) {struct gpio_regulator_data *drvdata =platform_get_drvdata (pdev); -regulator_unregister (drvdata->dev); -gpio_free_array (drvdata->gpios, drvdata->nr_gpios);
Quoted 9 lines
drivers/regulator/gpio-regulator.c static int gpio_regulator_remove(struct platform_device *pdev) · line 355
Quoted 1 line
drivers/regulator/gpio-regulator.c +0
-0kfree (drvdata->states);In most of the cases where unregister doesn't happen to be the only or last call in the remove path,
I am not sure if change in ordering wouldn't cause any functional issues. For. e.g., in this patch we are freeing the gpios and the driver states even before unregistering the device which is logically not right.
OK, I see.
I agree with your suggestion in order to keep the code stable. I will remove this patch from next v3 patch series.
Best regards,
Jingoo Han
PATCH v2 7/18 regulator: lp3971: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/lp3971.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/regulator/lp3971.c +3 -8
@@ -400,8 +400,9 @@ static int setup_regulators(struct lp3971 *lp3971, config.init_data = reg->initdata; config.driver_data = lp3971; - lp3971->rdev[i] =regulator_register (®ulators[reg->id], - &config); + lp3971->rdev[i] =devm_regulator_register (lp3971->dev, + ®ulators[reg->id], + &config);if (IS_ERR (lp3971->rdev[i])) { err =PTR_ERR (lp3971->rdev[i]); dev_err(lp3971->dev, "regulator init failed: %d\n",
@@ -413,8 +414,6 @@ static int setup_regulators(struct lp3971 *lp3971,return 0 ; error: -while (--i >=0 ) -regulator_unregister (lp3971->rdev[i]);kfree (lp3971->rdev); lp3971->rdev =NULL ; err_nomem:
@@ -463,10 +462,6 @@ static int lp3971_i2c_probe(struct i2c_client *i2c,static int lp3971_i2c_remove (struct i2c_client *i2c) {struct lp3971 *lp3971 =i2c_get_clientdata (i2c); -int i; - -for (i =0 ; i < lp3971->num_regulators; i++) -regulator_unregister (lp3971->rdev[i]);kfree (lp3971->rdev);
Signature · 1 line
1.7.10.4
Re: [PATCH V2 07/18] regulator: lp3971: use devm_regulator_register()
Quoted 8 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.Signed-off-by Jingoo Han <[email protected]>--- drivers/regulator/lp3971.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
[....]
drivers/regulator/lp3971.c static int lp3971_i2c_probe(struct i2c_client *i2c, · line 466
Quoted 10 lines
drivers/regulator/lp3971.c +0
-4@@ -463,10 +462,6 @@ static int lp3971_i2c_probe(struct i2c_client *i2c,static int lp3971_i2c_remove (struct i2c_client *i2c) {struct lp3971 *lp3971 =i2c_get_clientdata (i2c); -int i; - -for (i =0 ; i < lp3971->num_regulators; i++) -regulator_unregister (lp3971->rdev[i]);kfree (lp3971->rdev);
CC'ed Sachin Kamat,
Calling regulator_unregister(lp3971->rdev) after kfree(lp3971->rdev) would make the problem.
I will remove this patch from next v3 patch series.
Best regards,
Jingoo Han
PATCH v2 8/18 regulator: lp872x: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/lp872x.c | 33 +++------------------------------ 1 file changed, 3 insertions(+), 30 deletions(-)
drivers/regulator/lp872x.c +3 -30
@@ -785,7 +785,7 @@ static int lp872x_regulator_register(struct lp872x *lp)struct regulator_desc *desc;struct regulator_config cfg = { };struct regulator_dev *rdev; -int i, ret; +int i;for (i =0 ; i < lp->num_regulators; i++) { desc = (lp->chipid == LP8720) ? &lp8720_regulator_desc[i] :
@@ -796,34 +796,16 @@ static int lp872x_regulator_register(struct lp872x *lp) cfg.driver_data = lp; cfg.regmap = lp->regmap; - rdev =regulator_register (desc, &cfg); + rdev =devm_regulator_register (lp->dev, desc, &cfg);if (IS_ERR (rdev)) {dev_err (lp->dev,"regulator register err" ); - ret =PTR_ERR (rdev); - goto err; +return PTR_ERR (rdev); } *(lp->regulators + i) = rdev; }return 0 ; -err: -while (--i >=0 ) { - rdev = *(lp->regulators + i); -regulator_unregister (rdev); - } -return ret; -} - -static void lp872x_regulator_unregister (struct lp872x *lp) -{ -struct regulator_dev *rdev; -int i; - -for (i =0 ; i < lp->num_regulators; i++) { - rdev = *(lp->regulators + i); -regulator_unregister (rdev); - } }static const struct regmap_config lp872x_regmap_config = {
@@ -979,14 +961,6 @@ err_dev:return ret; } -static int lp872x_remove (struct i2c_client *cl) -{ -struct lp872x *lp =i2c_get_clientdata (cl); - -lp872x_regulator_unregister (lp); -return 0 ; -} -static const struct of_device_id lp872x_dt_ids[] = { { .compatible ="ti,lp8720" , }, { .compatible ="ti,lp8725" , },
@@ -1008,7 +982,6 @@ static struct i2c_driver lp872x_driver = { .of_match_table = of_match_ptr(lp872x_dt_ids), }, .probe = lp872x_probe, - .remove = lp872x_remove, .id_table = lp872x_ids, };
Signature · 1 line
1.7.10.4
PATCH v2 9/18 regulator: lp8788-buck: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/lp8788-buck.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
drivers/regulator/lp8788-buck.c +1 -11
@@ -515,7 +515,7 @@ static int lp8788_buck_probe(struct platform_device *pdev) cfg.driver_data = buck; cfg.regmap = lp->regmap; - rdev =regulator_register (&lp8788_buck_desc[id], &cfg); + rdev =devm_regulator_register (&pdev->dev, &lp8788_buck_desc[id], &cfg);if (IS_ERR (rdev)) { ret =PTR_ERR (rdev); dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
@@ -529,18 +529,8 @@ static int lp8788_buck_probe(struct platform_device *pdev)return 0 ; } -static int lp8788_buck_remove (struct platform_device *pdev) -{ -struct lp8788_buck *buck =platform_get_drvdata (pdev); - -regulator_unregister (buck->regulator); - -return 0 ; -} -static struct platform_driver lp8788_buck_driver = { .probe = lp8788_buck_probe, - .remove = lp8788_buck_remove, .driver = { .name =LP8788_DEV_BUCK , .owner =THIS_MODULE ,
Signature · 1 line
1.7.10.4
PATCH v2 10/18 regulator: lp8788-ldo: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/lp8788-ldo.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-)
drivers/regulator/lp8788-ldo.c +2 -22
@@ -543,7 +543,7 @@ static int lp8788_dldo_probe(struct platform_device *pdev) cfg.driver_data = ldo; cfg.regmap = lp->regmap; - rdev =regulator_register (&lp8788_dldo_desc[id], &cfg); + rdev =devm_regulator_register (&pdev->dev, &lp8788_dldo_desc[id], &cfg);if (IS_ERR (rdev)) { ret =PTR_ERR (rdev); dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n",
@@ -557,18 +557,8 @@ static int lp8788_dldo_probe(struct platform_device *pdev)return 0 ; } -static int lp8788_dldo_remove (struct platform_device *pdev) -{ -struct lp8788_ldo *ldo =platform_get_drvdata (pdev); - -regulator_unregister (ldo->regulator); - -return 0 ; -} -static struct platform_driver lp8788_dldo_driver = { .probe = lp8788_dldo_probe, - .remove = lp8788_dldo_remove, .driver = { .name =LP8788_DEV_DLDO , .owner =THIS_MODULE ,
@@ -603,7 +593,7 @@ static int lp8788_aldo_probe(struct platform_device *pdev) cfg.driver_data = ldo; cfg.regmap = lp->regmap; - rdev =regulator_register (&lp8788_aldo_desc[id], &cfg); + rdev =devm_regulator_register (&pdev->dev, &lp8788_aldo_desc[id], &cfg);if (IS_ERR (rdev)) { ret =PTR_ERR (rdev); dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n",
@@ -617,18 +607,8 @@ static int lp8788_aldo_probe(struct platform_device *pdev)return 0 ; } -static int lp8788_aldo_remove (struct platform_device *pdev) -{ -struct lp8788_ldo *ldo =platform_get_drvdata (pdev); - -regulator_unregister (ldo->regulator); - -return 0 ; -} -static struct platform_driver lp8788_aldo_driver = { .probe = lp8788_aldo_probe, - .remove = lp8788_aldo_remove, .driver = { .name =LP8788_DEV_ALDO , .owner =THIS_MODULE ,
Signature · 1 line
1.7.10.4
PATCH v2 11/18 regulator: max8925: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/max8925-regulator.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
drivers/regulator/max8925-regulator.c +1 -11
@@ -312,7 +312,7 @@ static int max8925_regulator_probe(struct platform_device *pdev)if (pdata) config.init_data = pdata; - rdev =regulator_register (&ri->desc, &config); + rdev =devm_regulator_register (&pdev->dev, &ri->desc, &config);if (IS_ERR (rdev)) {dev_err (&pdev->dev,"failed to register regulator %s\n" , ri->desc.name);
@@ -323,22 +323,12 @@ static int max8925_regulator_probe(struct platform_device *pdev)return 0 ; } -static int max8925_regulator_remove (struct platform_device *pdev) -{ -struct regulator_dev *rdev =platform_get_drvdata (pdev); - -regulator_unregister (rdev); - -return 0 ; -} -static struct platform_driver max8925_regulator_driver = { .driver = { .name ="max8925-regulator" , .owner =THIS_MODULE , }, .probe = max8925_regulator_probe, - .remove = max8925_regulator_remove, };static int __init max8925_regulator_init (void )
Signature · 1 line
1.7.10.4
PATCH v2 12/18 regulator: max8952: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/max8952.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/regulator/max8952.c +2 -4
@@ -231,7 +231,8 @@ static int max8952_pmic_probe(struct i2c_client *client,if (pdata->reg_data->constraints.boot_on) config.ena_gpio_flags |=GPIOF_OUT_INIT_HIGH ; - max8952->rdev =regulator_register (®ulator, &config); + max8952->rdev =devm_regulator_register (&client->dev, ®ulator, + &config);if (IS_ERR (max8952->rdev)) { ret =PTR_ERR (max8952->rdev);
@@ -321,9 +322,6 @@ static int max8952_pmic_remove(struct i2c_client *client) {struct max8952_data *max8952 =i2c_get_clientdata (client);struct max8952_platform_data *pdata = max8952->pdata; -struct regulator_dev *rdev = max8952->rdev; - -regulator_unregister (rdev);gpio_free (pdata->gpio_vid0);gpio_free (pdata->gpio_vid1);
Signature · 1 line
1.7.10.4
Re: [PATCH V2 12/18] regulator: max8952: use devm_regulator_register()
Quoted 8 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.Signed-off-by Jingoo Han <[email protected]>--- drivers/regulator/max8952.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
[.....]
drivers/regulator/max8952.c static int max8952_pmic_remove(struct i2c_client *client) · line 327
Quoted 10 lines
drivers/regulator/max8952.c +0
-3@@ -321,9 +322,6 @@ static int max8952_pmic_remove(struct i2c_client *client) {struct max8952_data *max8952 =i2c_get_clientdata (client);struct max8952_platform_data *pdata = max8952->pdata; -struct regulator_dev *rdev = max8952->rdev; - -regulator_unregister (rdev);gpio_free (pdata->gpio_vid0);gpio_free (pdata->gpio_vid1);
CC'ed Sachin Kamat,
Freeing the gpios before unregistering the device is not right, even though it does not make the functional problems. So, I will remove this patch from v3 patch series.
Best regards,
Jingoo Han
PATCH v2 13/18 regulator: pcap: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/pcap-regulator.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/regulator/pcap-regulator.c +2 -11
@@ -246,7 +246,8 @@ static int pcap_regulator_probe(struct platform_device *pdev) config.init_data =dev_get_platdata (&pdev->dev); config.driver_data = pcap; - rdev =regulator_register (&pcap_regulators[pdev->id], &config); + rdev =devm_regulator_register (&pdev->dev, &pcap_regulators[pdev->id], + &config);if (IS_ERR (rdev))return PTR_ERR (rdev);
@@ -255,22 +256,12 @@ static int pcap_regulator_probe(struct platform_device *pdev)return 0 ; } -static int pcap_regulator_remove (struct platform_device *pdev) -{ -struct regulator_dev *rdev =platform_get_drvdata (pdev); - -regulator_unregister (rdev); - -return 0 ; -} -static struct platform_driver pcap_regulator_driver = { .driver = { .name ="pcap-regulator" , .owner =THIS_MODULE , }, .probe = pcap_regulator_probe, - .remove = pcap_regulator_remove, };static int __init pcap_regulator_init (void )
Signature · 1 line
1.7.10.4
PATCH v2 14/18 regulator: pcf50633: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/pcf50633-regulator.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/regulator/pcf50633-regulator.c +2 -11
@@ -90,7 +90,8 @@ static int pcf50633_regulator_probe(struct platform_device *pdev) config.driver_data = pcf; config.regmap = pcf->regmap; - rdev =regulator_register (®ulators[pdev->id], &config); + rdev =devm_regulator_register (&pdev->dev, ®ulators[pdev->id], + &config);if (IS_ERR (rdev))return PTR_ERR (rdev);
@@ -102,21 +103,11 @@ static int pcf50633_regulator_probe(struct platform_device *pdev)return 0 ; } -static int pcf50633_regulator_remove (struct platform_device *pdev) -{ -struct regulator_dev *rdev =platform_get_drvdata (pdev); - -regulator_unregister (rdev); - -return 0 ; -} -static struct platform_driver pcf50633_regulator_driver = { .driver = { .name ="pcf50633-regltr" , }, .probe = pcf50633_regulator_probe, - .remove = pcf50633_regulator_remove, };static int __init pcf50633_regulator_init (void )
Signature · 1 line
1.7.10.4
PATCH v2 15/18 regulator: tps6105x: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove().
--- drivers/regulator/tps6105x-regulator.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
drivers/regulator/tps6105x-regulator.c +3 -10
@@ -146,8 +146,9 @@ static int tps6105x_regulator_probe(struct platform_device *pdev) config.driver_data = tps6105x;/* Register regulator with framework */ - tps6105x->regulator =regulator_register (&tps6105x_regulator_desc, - &config); + tps6105x->regulator =devm_regulator_register (&pdev->dev, + &tps6105x_regulator_desc, + &config);if (IS_ERR (tps6105x->regulator)) { ret =PTR_ERR (tps6105x->regulator); dev_err(&tps6105x->client->dev,
@@ -159,20 +160,12 @@ static int tps6105x_regulator_probe(struct platform_device *pdev)return 0 ; } -static int tps6105x_regulator_remove (struct platform_device *pdev) -{ -struct tps6105x *tps6105x =dev_get_platdata (&pdev->dev); -regulator_unregister (tps6105x->regulator); -return 0 ; -} -static struct platform_driver tps6105x_regulator_driver = { .driver = { .name ="tps6105x-regulator" , .owner =THIS_MODULE , }, .probe = tps6105x_regulator_probe, - .remove = tps6105x_regulator_remove, };static __init int tps6105x_regulator_init (void )
Signature · 1 line
1.7.10.4
PATCH v2 16/18 regulator: tps6524x: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/tps6524x-regulator.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/regulator/tps6524x-regulator.c +3 -4
@@ -584,10 +584,8 @@ static int pmic_remove(struct spi_device *spi)if (!hw)return 0 ; -for (i =0 ; i <N_REGULATORS ; i++) { -regulator_unregister (hw->rdev[i]); +for (i =0 ; i <N_REGULATORS ; i++) hw->rdev[i] =NULL ; - }return 0 ; }
@@ -631,7 +629,8 @@ static int pmic_probe(struct spi_device *spi) config.init_data = init_data; config.driver_data = hw; - hw->rdev[i] =regulator_register (&hw->desc[i], &config); + hw->rdev[i] =devm_regulator_register (dev, &hw->desc[i], + &config);if (IS_ERR (hw->rdev[i])) { ret =PTR_ERR (hw->rdev[i]); hw->rdev[i] =NULL ;
Signature · 1 line
1.7.10.4
PATCH v2 17/18 regulator: twl: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/twl-regulator.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/regulator/twl-regulator.c +1 -2
@@ -1188,7 +1188,7 @@ static int twlreg_probe(struct platform_device *pdev) config.driver_data = info; config.of_node = pdev->dev.of_node; - rdev =regulator_register (&info->desc, &config); + rdev =devm_regulator_register (&pdev->dev, &info->desc, &config);if (IS_ERR (rdev)) {dev_err (&pdev->dev,"can't register %s, %ld\n" , info->desc.name,PTR_ERR (rdev));
@@ -1217,7 +1217,6 @@ static int twlreg_remove(struct platform_device *pdev)struct regulator_dev *rdev =platform_get_drvdata (pdev);struct twlreg_info *info = rdev->reg_data; -regulator_unregister (rdev);kfree (info);return 0 ; }
Signature · 1 line
1.7.10.4
Re: [PATCH V2 17/18] regulator: twl: use devm_regulator_register()
Quoted 8 lines · Jingoo Han
Use
devm_regulator_register()to make cleanup paths simpler.Signed-off-by Jingoo Han <[email protected]>Acked-by Nishanth Menon <[email protected]>--- drivers/regulator/twl-regulator.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
[.....]
drivers/regulator/twl-regulator.c static int twlreg_remove(struct platform_device *pdev) · line 1222
Quoted 8 lines
drivers/regulator/twl-regulator.c +0
-1@@ -1217,7 +1217,6 @@ static int twlreg_remove(struct platform_device *pdev)struct regulator_dev *rdev =platform_get_drvdata (pdev);struct twlreg_info *info = rdev->reg_data; -regulator_unregister (rdev);kfree (info);return 0 ; }
kfree(info) is kfree(rdev->reg_data).
The following would be right.
1. kfree(rdev->reg_data)
2. regulator_unregister(rdev)
Also, regulator_unregister() does not access 'rdev->reg_data'. So, it would not make the problem.
Best regards,
Jingoo Han
PATCH v2 18/18 regulator: vexpress: use devm_regulator_register()
In reply to Jingoo HanUse devm_regulator_register() to make cleanup paths simpler.
--- drivers/regulator/vexpress.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/regulator/vexpress.c +1 -2
@@ -96,7 +96,7 @@ static int vexpress_regulator_probe(struct platform_device *pdev) config.driver_data = reg; config.of_node = pdev->dev.of_node; - reg->regdev =regulator_register (®->desc, &config); + reg->regdev =devm_regulator_register (&pdev->dev, ®->desc, &config);if (IS_ERR (reg->regdev)) { err =PTR_ERR (reg->regdev); goto error_regulator_register;
@@ -119,7 +119,6 @@ static int vexpress_regulator_remove(struct platform_device *pdev)struct vexpress_regulator *reg =platform_get_drvdata (pdev);vexpress_config_func_put (reg->func); -regulator_unregister (reg->regdev);return 0 ; }
Signature · 1 line
1.7.10.4