HTB & tc
Check if you have HTB support in your kernel.
it must be in kernel/net/sched
----- Original Message -----
From: "Antonin Karasek" <[email protected]>
To: <[email protected]>
Sent: Thursday, July 22, 2004 6:58 PM
Subject: [LARTC] HTB & tc
Quoted 10 lines
Hi,
I'm trying to make run a simple shaping *through HTB*. I have compiled a new kernel 2.4.21.First command from
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
said:# tc qdisc add dev eth0 root handle 1: htb default 12 RTNETLINK answers: Invalid argument
Quoted 6 lines
I tryed both standard tc from Debian stable and
http://luxik.cdi.cz/~devik/qos/htb/v2/tc.gz
this one...I tryed htb.init-v0.8.5 from SourceForge with htb-lartc.tar.gz configuration from the same site. The script doesn't report any error, but
:
Quoted 5 lines
skatach:~/bin# ./htb.init-v0.8.5 start skatach:~/bin# tc filter show dev eth0 skatach:~/bin# tc class show dev eth0 skatach:~/bin# tc qdisc show
Quoted 8 lines
As I guess, it means, that there isn't any class. It isn't, what I want :(
Any ideas, where the problem can be?
Many thanks.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
I'm trying to make run a simple shaping *through HTB*. I have compiled a new kernel 2.4.21.
First command from
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
said:
# tc qdisc add dev eth0 root handle 1: htb default 12 RTNETLINK answers: Invalid argument
I tryed both standard tc from Debian stable and
http://luxik.cdi.cz/~devik/qos/htb/v2/tc.gz
this one...
I tryed htb.init-v0.8.5 from SourceForge with htb-lartc.tar.gz configuration from the same site. The script doesn't report any error, but :
skatach:~/bin# ./htb.init-v0.8.5 start skatach:~/bin# tc filter show dev eth0 skatach:~/bin# tc class show dev eth0 skatach:~/bin# tc qdisc show
As I guess, it means, that there isn't any class. It isn't, what I want :(
Any ideas, where the problem can be?
Many thanks.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
OT: Dudes, why i have to reedit To field and delete CC field, gmail see this as spam
Now, make sure you compiled the kernel with htb, latest stable kernel is 2.4.26 or 2.6.7
Quoted 21 lines · Antonin Karasek
Hi,
I'm trying to make run a simple shaping *through HTB*. I have compiled a new kernel 2.4.21.First command from
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
said:# tc qdisc add dev eth0 root handle 1: htb default 12 RTNETLINK answers: Invalid argumentI tryed both standard tc from Debian stable and
http://luxik.cdi.cz/~devik/qos/htb/v2/tc.gz
this one...I tryed htb.init-v0.8.5 from SourceForge with htb-lartc.tar.gz configuration from the same site. The script doesn't report any error, but :
skatach:~/bin# ./htb.init-v0.8.5 start skatach:~/bin# tc filter show dev eth0 skatach:~/bin# tc class show dev eth0 skatach:~/bin# tc qdisc show
Quoted 9 lines
As I guess, it means, that there isn't any class. It isn't, what I want :(
Any ideas, where the problem can be?
Many thanks.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/