scsi: replace strict_strtoul() with kstrtoul()

The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used.

Signed-off-by Jingoo Han <[email protected]>

---
Changes since v1:
- Used return code from kstrtoul().

 drivers/scsi/pmcraid.c    |    6 ++++--
 drivers/scsi/scsi_sysfs.c |    6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

drivers/scsi/pmcraid.c +4 -2

index 8e1b737..39b42a4 100644
@@ -4203,9 +4203,11 @@ static ssize_t pmcraid_store_log_level(
        struct Scsi_Host *shost;
        struct pmcraid_instance *pinstance;
        unsigned long val;
+       int ret;
 
-       if (strict_strtoul(buf, 10, &val))
-               return -EINVAL;
+       ret = kstrtoul(buf, 10, &val);
+       if (ret)
+               return ret;
        /* log-level should be from 0 to 2 */
        if (val > 2)
                return -EINVAL;

drivers/scsi/scsi_sysfs.c +4 -3

index 931a7d9..4a8b675 100644
@@ -789,9 +789,11 @@ sdev_store_queue_ramp_up_period(struct device *dev,
 {
        struct scsi_device *sdev = to_scsi_device(dev);
        unsigned long period;
+       int ret;
 
-       if (strict_strtoul(buf, 10, &period))
-               return -EINVAL;
+       ret = kstrtoul(buf, 10, &period);
+       if (ret)
+               return ret;
 
        sdev->queue_ramp_up_period = msecs_to_jiffies(period);
        return period;
--

1.7.10.4