conf: don't check if config files are up to date
PATCH 1/1 conf: don't check if config files are up to date
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
--- src/conf.c | 63 ++++++++++++++++++++++++---------------------------------- src/confmisc.c | 4 +++- 2 files changed, 29 insertions(+), 38 deletions(-)
src/conf.c +26 -37
@@ -3661,14 +3661,15 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER#endif /** -* \brief Updates a configuration tree by rereading the configuration files (if needed). +* \brief Updates a configuration tree by rereading the configuration files. * \param[in,out] _top Address of the handle to the top-level node. * \param[in,out] _update Address of a pointer to private update information. * \param[in] cfgs A list of configuration file names, delimited with ':'. * If \p cfgs is \c NULL, the default global * configuration file is used. -* \return 0 if \a _top was up to date, 1 if the configuration files -* have been reread, otherwise a negative error code. +* \return 0 if \a _top was up to date (this can happen only in previous +* ALSA-lib versions), 1 if the configuration files have been +* reread successfully, otherwise a negative error code. * * The variables pointed to by \a _top and \a _update can be initialized * to \c NULL before the first call to this function. The private
@@ -3679,7 +3680,8 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER* The global configuration files are specified in the environment variable * \c ALSA_CONFIG_PATH. * -* \warning If the configuration tree is reread, all string pointers and +* \warning In order to deal with hot-pluggable devices, the configuration +* tree is always reread, even if nothing changed. All string pointers and * configuration node handles previously obtained from this tree become * invalid. *
@@ -3754,35 +3756,6 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons local->count--; } } -if (!update) - goto _reread; -if (local->count != update->count) - goto _reread; -for (k =0 ; k < local->count; ++k) { -struct finfo *lf = &local->finfo[k]; -struct finfo *uf = &update->finfo[k]; -if (strcmp (lf->name, uf->name) !=0 || - lf->dev != uf->dev || - lf->ino != uf->ino || - lf->mtime != uf->mtime) - goto _reread; - } - err =0 ; - - _end: -if (err <0 ) { -if (top) { -snd_config_delete (top); - *_top =NULL ; - } -if (update) { -snd_config_update_free (update); - *_update =NULL ; - } - } -if (local) -snd_config_update_free (local); -return err; _reread: *_top =NULL ;
@@ -3823,15 +3796,31 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons *_top = top; *_update = local;return 1 ; + +_end: +if (err <0 ) { +if (top) { +snd_config_delete (top); + *_top =NULL ; + } +if (update) { +snd_config_update_free (update); + *_update =NULL ; + } + } +if (local) +snd_config_update_free (local); +return err; }/** -* \brief Updates #snd_config by rereading the global configuration files (if needed). -* \return 0 if #snd_config was up to date, 1 if #snd_config was -* updated, otherwise a negative error code. +* \brief Updates #snd_config by rereading the global configuration files. +* \return 0 if #snd_config was up to date (this can happen only in previous +* ALSA-lib versions), 1 if #snd_config was updated successfully, +* otherwise a negative error code. * * \warning Whenever #snd_config is updated, all string pointers and -* configuration node handles previously obtained from it may become +* configuration node handles previously obtained from it become * invalid. * * \par Errors:
src/confmisc.c +3 -1
@@ -599,7 +599,9 @@ static int open_ctl(long card, snd_ctl_t **ctl)char name[16 ];snprintf (name,sizeof (name),"hw:%li" , card); name[sizeof (name)-1 ] ='\0' ; -return snd_ctl_open (ctl, name,0 ); + +/* Take care not to update the config - we may be running hooks on pcms right now */ +return snd_ctl_open_lconf (ctl, name,0 , snd_config); }#if 0
Signature · 1 line
2.8.0
Quoted 7 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
thanks,
Takashi
Quoted 130 lines
Signed-off-by Alexander E. Patrakov <[email protected]>--- src/conf.c | 63 ++++++++++++++++++++++++---------------------------------- src/confmisc.c | 4 +++- 2 files changed, 29 insertions(+), 38 deletions(-)src/conf.c +26
-37@@ -3661,14 +3661,15 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER#endif /** -* \brief Updates a configuration tree by rereading the configuration files (if needed). +* \brief Updates a configuration tree by rereading the configuration files. * \param[in,out] _top Address of the handle to the top-level node. * \param[in,out] _update Address of a pointer to private update information. * \param[in] cfgs A list of configuration file names, delimited with ':'. * If \p cfgs is \c NULL, the default global * configuration file is used. -* \return 0 if \a _top was up to date, 1 if the configuration files -* have been reread, otherwise a negative error code. +* \return 0 if \a _top was up to date (this can happen only in previous +* ALSA-lib versions), 1 if the configuration files have been +* reread successfully, otherwise a negative error code. * * The variables pointed to by \a _top and \a _update can be initialized * to \c NULL before the first call to this function. The private @@ -3679,7 +3680,8 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER* The global configuration files are specified in the environment variable * \c ALSA_CONFIG_PATH. * -* \warning If the configuration tree is reread, all string pointers and +* \warning In order to deal with hot-pluggable devices, the configuration +* tree is always reread, even if nothing changed. All string pointers and * configuration node handles previously obtained from this tree become * invalid. * @@ -3754,35 +3756,6 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons local->count--; } } -if (!update) - goto _reread; -if (local->count != update->count) - goto _reread; -for (k =0 ; k < local->count; ++k) { -struct finfo *lf = &local->finfo[k]; -struct finfo *uf = &update->finfo[k]; -if (strcmp (lf->name, uf->name) !=0 || - lf->dev != uf->dev || - lf->ino != uf->ino || - lf->mtime != uf->mtime) - goto _reread; - } - err =0 ; - - _end: -if (err <0 ) { -if (top) { -snd_config_delete (top); - *_top =NULL ; - } -if (update) { -snd_config_update_free (update); - *_update =NULL ; - } - } -if (local) -snd_config_update_free (local); -return err; _reread: *_top =NULL ;@@ -3823,15 +3796,31 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons *_top = top; *_update = local;return 1 ; + +_end: +if (err <0 ) { +if (top) { +snd_config_delete (top); + *_top =NULL ; + } +if (update) { +snd_config_update_free (update); + *_update =NULL ; + } + } +if (local) +snd_config_update_free (local); +return err; }/** -* \brief Updates #snd_config by rereading the global configuration files (if needed). -* \return 0 if #snd_config was up to date, 1 if #snd_config was -* updated, otherwise a negative error code. +* \brief Updates #snd_config by rereading the global configuration files. +* \return 0 if #snd_config was up to date (this can happen only in previous +* ALSA-lib versions), 1 if #snd_config was updated successfully, +* otherwise a negative error code. * * \warning Whenever #snd_config is updated, all string pointers and -* configuration node handles previously obtained from it may become +* configuration node handles previously obtained from it become * invalid. * * \par Errors: src/confmisc.c +3
-1@@ -599,7 +599,9 @@ static int open_ctl(long card, snd_ctl_t **ctl)char name[16 ];snprintf (name,sizeof (name),"hw:%li" , card); name[sizeof (name)-1 ] ='\0' ; -return snd_ctl_open (ctl, name,0 ); + +/* Take care not to update the config - we may be running hooks on pcms right now */ +return snd_ctl_open_lconf (ctl, name,0 , snd_config); }#if 0 Signature · 1 line
2.8.0
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
1. We already have such API. It is called snd_config_top(), snd_config_update_r() and snd_pcm_open_lconf(). Would you accept a documentation patch that says that snd_pcm_open cannot deal with hot-plugged devices, and directs users to snd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion to snd_pcm_open_lconf() in PulseAudio.
2. Even if a user calls snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated with snd_config_update() - i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the same snd_config_t structure that was passed to snd_pcm_open_lconf(). I am not sure about the difficulty of this task.
3. One of my early attempts of the patch (without the hunk about snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls to snd_pcm_update() in snd_pcm_open() and in snd_ctl_open() (which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the same snd_config_t structure that was passed to snd_pcm_open_noupdate(), see above.
4. I still think that the file mtime check in snd_config_update_r does not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?
What do you think?
Signature · 1 line
Alexander E. Patrakov
Quoted 136 lines
thanks,
Takashi
Quoted 130 lines
Signed-off-by Alexander E. Patrakov <[email protected]>--- src/conf.c | 63 ++++++++++++++++++++++++---------------------------------- src/confmisc.c | 4 +++- 2 files changed, 29 insertions(+), 38 deletions(-)src/conf.c +26
-37@@ -3661,14 +3661,15 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER#endif /** -* \brief Updates a configuration tree by rereading the configuration files (if needed). +* \brief Updates a configuration tree by rereading the configuration files. * \param[in,out] _top Address of the handle to the top-level node. * \param[in,out] _update Address of a pointer to private update information. * \param[in] cfgs A list of configuration file names, delimited with ':'. * If \p cfgs is \c NULL, the default global * configuration file is used. -* \return 0 if \a _top was up to date, 1 if the configuration files -* have been reread, otherwise a negative error code. +* \return 0 if \a _top was up to date (this can happen only in previous +* ALSA-lib versions), 1 if the configuration files have been +* reread successfully, otherwise a negative error code. * * The variables pointed to by \a _top and \a _update can be initialized * to \c NULL before the first call to this function. The private @@ -3679,7 +3680,8 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER* The global configuration files are specified in the environment variable * \c ALSA_CONFIG_PATH. * -* \warning If the configuration tree is reread, all string pointers and +* \warning In order to deal with hot-pluggable devices, the configuration +* tree is always reread, even if nothing changed. All string pointers and * configuration node handles previously obtained from this tree become * invalid. * @@ -3754,35 +3756,6 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons local->count--; } } -if (!update) - goto _reread; -if (local->count != update->count) - goto _reread; -for (k =0 ; k < local->count; ++k) { -struct finfo *lf = &local->finfo[k]; -struct finfo *uf = &update->finfo[k]; -if (strcmp (lf->name, uf->name) !=0 || - lf->dev != uf->dev || - lf->ino != uf->ino || - lf->mtime != uf->mtime) - goto _reread; - } - err =0 ; - - _end: -if (err <0 ) { -if (top) { -snd_config_delete (top); - *_top =NULL ; - } -if (update) { -snd_config_update_free (update); - *_update =NULL ; - } - } -if (local) -snd_config_update_free (local); -return err; _reread: *_top =NULL ;@@ -3823,15 +3796,31 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons *_top = top; *_update = local;return 1 ; + +_end: +if (err <0 ) { +if (top) { +snd_config_delete (top); + *_top =NULL ; + } +if (update) { +snd_config_update_free (update); + *_update =NULL ; + } + } +if (local) +snd_config_update_free (local); +return err; }/** -* \brief Updates #snd_config by rereading the global configuration files (if needed). -* \return 0 if #snd_config was up to date, 1 if #snd_config was -* updated, otherwise a negative error code. +* \brief Updates #snd_config by rereading the global configuration files. +* \return 0 if #snd_config was up to date (this can happen only in previous +* ALSA-lib versions), 1 if #snd_config was updated successfully, +* otherwise a negative error code. * * \warning Whenever #snd_config is updated, all string pointers and -* configuration node handles previously obtained from it may become +* configuration node handles previously obtained from it become * invalid. * * \par Errors: src/confmisc.c +3
-1@@ -599,7 +599,9 @@ static int open_ctl(long card, snd_ctl_t **ctl)char name[16 ];snprintf (name,sizeof (name),"hw:%li" , card); name[sizeof (name)-1 ] ='\0' ; -return snd_ctl_open (ctl, name,0 ); + +/* Take care not to update the config - we may be running hooks on pcms right now */ +return snd_ctl_open_lconf (ctl, name,0 , snd_config); }#if 0 Signature · 1 line
2.8.0
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.
Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.
Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.
Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling snd_config_update_free_global() beforehand.
There is a minimal protection by pthread mutex in conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.
thanks,
Takashi
Quoted 140 lines
What do you think?
Signature · 1 line
Alexander E. PatrakovQuoted 132 lines
thanks,
Takashi
Quoted 126 lines
Signed-off-by Alexander E. Patrakov <[email protected]>--- src/conf.c | 63 ++++++++++++++++++++++++---------------------------------- src/confmisc.c | 4 +++- 2 files changed, 29 insertions(+), 38 deletions(-)src/conf.c +26
-37@@ -3661,14 +3661,15 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER#endif /** -* \brief Updates a configuration tree by rereading the configuration files (if needed). +* \brief Updates a configuration tree by rereading the configuration files. * \param[in,out] _top Address of the handle to the top-level node. * \param[in,out] _update Address of a pointer to private update information. * \param[in] cfgs A list of configuration file names, delimited with ':'. * If \p cfgs is \c NULL, the default global * configuration file is used. -* \return 0 if \a _top was up to date, 1 if the configuration files -* have been reread, otherwise a negative error code. +* \return 0 if \a _top was up to date (this can happen only in previous +* ALSA-lib versions), 1 if the configuration files have been +* reread successfully, otherwise a negative error code. * * The variables pointed to by \a _top and \a _update can be initialized * to \c NULL before the first call to this function. The private @@ -3679,7 +3680,8 @@ SND_DLSYM_BUILD_VERSION(snd_config_hook_load_for_all_cards, SND_CONFIG_DLSYM_VER* The global configuration files are specified in the environment variable * \c ALSA_CONFIG_PATH. * -* \warning If the configuration tree is reread, all string pointers and +* \warning In order to deal with hot-pluggable devices, the configuration +* tree is always reread, even if nothing changed. All string pointers and * configuration node handles previously obtained from this tree become * invalid. * @@ -3754,35 +3756,6 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons local->count--; } } -if (!update) - goto _reread; -if (local->count != update->count) - goto _reread; -for (k =0 ; k < local->count; ++k) { -struct finfo *lf = &local->finfo[k]; -struct finfo *uf = &update->finfo[k]; -if (strcmp (lf->name, uf->name) !=0 || - lf->dev != uf->dev || - lf->ino != uf->ino || - lf->mtime != uf->mtime) - goto _reread; - } - err =0 ; - - _end: -if (err <0 ) { -if (top) { -snd_config_delete (top); - *_top =NULL ; - } -if (update) { -snd_config_update_free (update); - *_update =NULL ; - } - } -if (local) -snd_config_update_free (local); -return err; _reread: *_top =NULL ;@@ -3823,15 +3796,31 @@ int snd_config_update_r(snd_config_t **_top, snd_config_update_t **_update, cons *_top = top; *_update = local;return 1 ; + +_end: +if (err <0 ) { +if (top) { +snd_config_delete (top); + *_top =NULL ; + } +if (update) { +snd_config_update_free (update); + *_update =NULL ; + } + } +if (local) +snd_config_update_free (local); +return err; }/** -* \brief Updates #snd_config by rereading the global configuration files (if needed). -* \return 0 if #snd_config was up to date, 1 if #snd_config was -* updated, otherwise a negative error code. +* \brief Updates #snd_config by rereading the global configuration files. +* \return 0 if #snd_config was up to date (this can happen only in previous +* ALSA-lib versions), 1 if #snd_config was updated successfully, +* otherwise a negative error code. * * \warning Whenever #snd_config is updated, all string pointers and -* configuration node handles previously obtained from it may become +* configuration node handles previously obtained from it become * invalid. * * \par Errors: src/confmisc.c +3
-1@@ -599,7 +599,9 @@ static int open_ctl(long card, snd_ctl_t **ctl)char name[16 ];snprintf (name,sizeof (name),"hw:%li" , card); name[sizeof (name)-1 ] ='\0' ; -return snd_ctl_open (ctl, name,0 ); + +/* Take care not to update the config - we may be running hooks on pcms right now */ +return snd_ctl_open_lconf (ctl, name,0 , snd_config); }#if 0 Signature · 1 line
2.8.0
Quoted 60 lines · Takashi Iwai
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?
Quoted 8 lines
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling
snd_config_update_free_global()beforehand.There is a minimal protection by pthread mutex in
conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.
So here is a quick hack. It adds a simple refcount in snd_config_t. snd_config_update_get() gives a top config with a refcount so that it won't be deleted until disposed by snd_config_put().
In this patch, the config update itself is kept in traditional way, i.e. lazy update with mtime check. For the forced refresh, I added snd_config_refresh() which removes snd_config_global_update so that at the next snd_config_update() will reread properly. PA can call this function appropriately, e.g. when hotplugged.
The patch is just a proof of concept and even untested. Once when confirmed that it's the way to go, I'll cook up more.
Takashi
---
include/conf.h +4 -0
@@ -94,6 +94,10 @@ int snd_config_update_r(snd_config_t **top, snd_config_update_t **update, constint snd_config_update_free (snd_config_update_t *update);int snd_config_update_free_global (void ); +void snd_config_refresh (void ); +int snd_config_update_get (snd_config_t **top); +void snd_config_put (snd_config_t *top); +int snd_config_search (snd_config_t *config,const char *key,snd_config_t **result); int snd_config_searchv(snd_config_t *config,
src/conf.c +38 -0
@@ -434,6 +434,7 @@ static pthread_once_t snd_config_update_mutex_once = PTHREAD_ONCE_INIT;struct _snd_config {char *id;snd_config_type_t type; +int refcount;union {long integer;long long integer64;
@@ -1833,6 +1834,10 @@ int snd_config_remove(snd_config_t *config)int snd_config_delete (snd_config_t *config) {assert (config); +if (config->refcount >0 ) { + config->refcount--; +return 0 ; + }switch (config->type) {case SND_CONFIG_TYPE_COMPOUND : {
@@ -3851,6 +3856,39 @@ int snd_config_update(void)return err; } +void snd_config_refresh (void ) +{ +snd_config_lock (); +if (snd_config_global_update) +snd_config_update_free (snd_config_global_update); + snd_config_global_update =NULL ; +snd_config_unlock (); +} + +int snd_config_update_get (snd_config_t **top) +{ +int err; + + *top =NULL ; +snd_config_lock (); + err =snd_config_update_r (&snd_config, &snd_config_global_update,NULL ); +if (!err) { + *top = snd_config; +if (*top) + (*top)->refcount++; + } +snd_config_unlock (); +return err; +} + +void snd_config_put (snd_config_t *cfg) +{ +snd_config_lock (); +if (cfg) +snd_config_delete (cfg); +snd_config_unlock (); +} +/** * \brief Frees a private update structure. * \param[in] update The private update structure to free.
src/control/control.c +6 -2
@@ -968,12 +968,16 @@ static int snd_ctl_open_noupdate(snd_ctl_t **ctlp, snd_config_t *root, const cha*/ int snd_ctl_open (snd_ctl_t **ctlp,const char *name,int mode) { +snd_config_t *top;int err; +assert (ctlp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_ctl_open_noupdate (ctlp, snd_config, name, mode); + err =snd_ctl_open_noupdate (ctlp, top, name, mode); +snd_config_put (top); +return err; }/**
src/hwdep/hwdep.c +6 -2
@@ -168,12 +168,16 @@ static int snd_hwdep_open_noupdate(snd_hwdep_t **hwdep, snd_config_t *root, cons*/ int snd_hwdep_open (snd_hwdep_t **hwdep,const char *name,int mode) { +snd_config_t *top;int err; +assert (hwdep && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_hwdep_open_noupdate (hwdep, snd_config, name, mode); + err =snd_hwdep_open_noupdate (hwdep, top, name, mode); +snd_config_put (top); +return err; }/**
src/pcm/pcm.c +6 -2
@@ -2288,12 +2288,16 @@ static int snd_pcm_open_noupdate(snd_pcm_t **pcmp, snd_config_t *root,int snd_pcm_open (snd_pcm_t **pcmp,const char *name,snd_pcm_stream_t stream,int mode) { +snd_config_t *top;int err; +assert (pcmp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_pcm_open_noupdate (pcmp, snd_config, name, stream, mode,0 ); + err =snd_pcm_open_noupdate (pcmp, top, name, stream, mode,0 ); +snd_config_put (top); +return err; }/**
src/rawmidi/rawmidi.c +6 -2
@@ -305,12 +305,16 @@ static int snd_rawmidi_open_noupdate(snd_rawmidi_t **inputp, snd_rawmidi_t **outint snd_rawmidi_open (snd_rawmidi_t **inputp,snd_rawmidi_t **outputp,const char *name,int mode) { +snd_config_t *top;int err; +assert ((inputp || outputp) && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_rawmidi_open_noupdate (inputp, outputp, snd_config, name, mode); + err =snd_rawmidi_open_noupdate (inputp, outputp, top, name, mode); +snd_config_put (top); +return err; }/**
src/seq/seq.c +6 -2
@@ -974,12 +974,16 @@ static int snd_seq_open_noupdate(snd_seq_t **seqp, snd_config_t *root,int snd_seq_open (snd_seq_t **seqp,const char *name,int streams,int mode) { +snd_config_t *top;int err; +assert (seqp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_seq_open_noupdate (seqp, snd_config, name, streams, mode,0 ); + err =snd_seq_open_noupdate (seqp, top, name, streams, mode,0 ); +snd_config_put (top); +return err; }/**
src/timer/timer.c +6 -2
@@ -201,12 +201,16 @@ static int snd_timer_open_noupdate(snd_timer_t **timer, snd_config_t *root, cons*/ int snd_timer_open (snd_timer_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
src/timer/timer_query.c +6 -2
@@ -159,12 +159,16 @@ static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t*/ int snd_timer_query_open (snd_timer_query_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_query_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_query_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
Quoted 76 lines · Takashi Iwai
Quoted 60 lines · Takashi Iwai
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?Quoted 8 lines
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling
snd_config_update_free_global()beforehand.There is a minimal protection by pthread mutex in
conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.So here is a quick hack. It adds a simple refcount in
snd_config_t.snd_config_update_get()gives a top config with a refcount so that it won't be deleted until disposed bysnd_config_put().
Quoted 8 lines
In this patch, the config update itself is kept in traditional way, i.e. lazy update with mtime check. For the forced refresh, I added
snd_config_refresh()which removessnd_config_global_updateso that at the nextsnd_config_update()will reread properly. PA can call this function appropriately, e.g. when hotplugged.The patch is just a proof of concept and even untested. Once when confirmed that it's the way to go, I'll cook up more.
There was a typo indeed. The revised patch is below. aplay worked at least :) And now it has comments.
Takashi
---
include/conf.h +4 -0
@@ -94,6 +94,10 @@ int snd_config_update_r(snd_config_t **top, snd_config_update_t **update, constint snd_config_update_free (snd_config_update_t *update);int snd_config_update_free_global (void ); +void snd_config_refresh (void ); +int snd_config_update_get (snd_config_t **top); +void snd_config_put (snd_config_t *top); +int snd_config_search (snd_config_t *config,const char *key,snd_config_t **result); int snd_config_searchv(snd_config_t *config,
src/conf.c +59 -0
77 lines not on this page · raw message
src/control/control.c +6 -2
@@ -968,12 +968,16 @@ static int snd_ctl_open_noupdate(snd_ctl_t **ctlp, snd_config_t *root, const cha*/ int snd_ctl_open (snd_ctl_t **ctlp,const char *name,int mode) { +snd_config_t *top;int err; +assert (ctlp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_ctl_open_noupdate (ctlp, snd_config, name, mode); + err =snd_ctl_open_noupdate (ctlp, top, name, mode); +snd_config_put (top); +return err; }/**
src/hwdep/hwdep.c +6 -2
@@ -168,12 +168,16 @@ static int snd_hwdep_open_noupdate(snd_hwdep_t **hwdep, snd_config_t *root, cons*/ int snd_hwdep_open (snd_hwdep_t **hwdep,const char *name,int mode) { +snd_config_t *top;int err; +assert (hwdep && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_hwdep_open_noupdate (hwdep, snd_config, name, mode); + err =snd_hwdep_open_noupdate (hwdep, top, name, mode); +snd_config_put (top); +return err; }/**
src/pcm/pcm.c +6 -2
@@ -2288,12 +2288,16 @@ static int snd_pcm_open_noupdate(snd_pcm_t **pcmp, snd_config_t *root,int snd_pcm_open (snd_pcm_t **pcmp,const char *name,snd_pcm_stream_t stream,int mode) { +snd_config_t *top;int err; +assert (pcmp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_pcm_open_noupdate (pcmp, snd_config, name, stream, mode,0 ); + err =snd_pcm_open_noupdate (pcmp, top, name, stream, mode,0 ); +snd_config_put (top); +return err; }/**
src/rawmidi/rawmidi.c +6 -2
@@ -305,12 +305,16 @@ static int snd_rawmidi_open_noupdate(snd_rawmidi_t **inputp, snd_rawmidi_t **outint snd_rawmidi_open (snd_rawmidi_t **inputp,snd_rawmidi_t **outputp,const char *name,int mode) { +snd_config_t *top;int err; +assert ((inputp || outputp) && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_rawmidi_open_noupdate (inputp, outputp, snd_config, name, mode); + err =snd_rawmidi_open_noupdate (inputp, outputp, top, name, mode); +snd_config_put (top); +return err; }/**
src/seq/seq.c +6 -2
@@ -974,12 +974,16 @@ static int snd_seq_open_noupdate(snd_seq_t **seqp, snd_config_t *root,int snd_seq_open (snd_seq_t **seqp,const char *name,int streams,int mode) { +snd_config_t *top;int err; +assert (seqp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_seq_open_noupdate (seqp, snd_config, name, streams, mode,0 ); + err =snd_seq_open_noupdate (seqp, top, name, streams, mode,0 ); +snd_config_put (top); +return err; }/**
src/timer/timer.c +6 -2
@@ -201,12 +201,16 @@ static int snd_timer_open_noupdate(snd_timer_t **timer, snd_config_t *root, cons*/ int snd_timer_open (snd_timer_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
src/timer/timer_query.c +6 -2
@@ -159,12 +159,16 @@ static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t*/ int snd_timer_query_open (snd_timer_query_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_query_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_query_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
2016-05-13 20:04 GMT+05:00 Takashi Iwai <[email protected]>:
Quoted 84 lines
Quoted 82 lines · Takashi Iwai
Quoted 60 lines · Takashi Iwai
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?Quoted 8 lines
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling
snd_config_update_free_global()beforehand.There is a minimal protection by pthread mutex in
conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.So here is a quick hack. It adds a simple refcount in
snd_config_t.snd_config_update_get()gives a top config with a refcount so that it won't be deleted until disposed bysnd_config_put().In this patch, the config update itself is kept in traditional way, i.e. lazy update with mtime check. For the forced refresh, I added
snd_config_refresh()which removessnd_config_global_updateso that at the nextsnd_config_update()will reread properly. PA can call this function appropriately, e.g. when hotplugged.
Quoted 5 lines
Quoted 2 lines
The patch is just a proof of concept and even untested. Once when confirmed that it's the way to go, I'll cook up more.
There was a typo indeed. The revised patch is below. aplay worked at least :) And now it has comments.
I will test it tomorrow.
However, now (it's 04:51 localtime, and I still can't sleep) I can't understand whether snd_config_refresh() can be called safely at all when something is playing to a hooks pcm with "ctl_elems" type (and that use case is important for PulseAudio). Are the names of the controls copied from the config with something like strdup (then it's OK), or just point to a live structure that you are about to refresh?
P.S. The same objection, of course, applies to my original patch.
Quoted 265 lines
Takashi
---
include/conf.h +4
-0@@ -94,6 +94,10 @@ int snd_config_update_r(snd_config_t **top, snd_config_update_t **update, constint snd_config_update_free (snd_config_update_t *update);int snd_config_update_free_global (void ); +void snd_config_refresh (void ); +int snd_config_update_get (snd_config_t **top); +void snd_config_put (snd_config_t *top); +int snd_config_search (snd_config_t *config,const char *key,snd_config_t **result); int snd_config_searchv(snd_config_t *config,src/conf.c +59
-0@@ -434,6 +434,7 @@ static pthread_once_t snd_config_update_mutex_once = PTHREAD_ONCE_INIT;struct _snd_config {char *id;snd_config_type_t type; +int refcount;/* default = 0 */ union {long integer;long long integer64;@@ -1833,6 +1834,10 @@ int snd_config_remove(snd_config_t *config)int snd_config_delete (snd_config_t *config) {assert (config); +if (config->refcount >0 ) { + config->refcount--; +return 0 ; + }switch (config->type) {case SND_CONFIG_TYPE_COMPOUND : {@@ -3851,6 +3856,60 @@ int snd_config_update(void)return err; } +/** +* \brief Clear the local config update cache +* +* This function clears the local config update cache to guarantee that +* the next call of #snd_config_update will reread the config files. +*/ +void snd_config_refresh (void ) +{ +snd_config_lock (); +if (snd_config_global_update) +snd_config_update_free (snd_config_global_update); + snd_config_global_update =NULL ; +snd_config_unlock (); +} + +/** +* \brief Updates #snd_config and take its reference. +* \return 0 if #snd_config was up to date, 1 if #snd_config was +* updated, otherwise a negative error code. +* +* Unlike #snd_config_update, this function increases a reference counter +* so that the obtained tree won't be deleted until unreferenced by +* #snd_config_put. +*/ +int snd_config_update_get (snd_config_t **top) +{ +int err; + + *top =NULL ; +snd_config_lock (); + err =snd_config_update_r (&snd_config, &snd_config_global_update,NULL ); +if (err >=0 ) { + *top = snd_config; +if (*top) + (*top)->refcount++; + } +snd_config_unlock (); +return err; +} + +/** +* \brief Unreference the config tree. +* +* Decreases a reference counter of the given config tree. This is the +* counterpart of #snd_config_update_get. +*/ +void snd_config_put (snd_config_t *cfg) +{ +snd_config_lock (); +if (cfg) +snd_config_delete (cfg); +snd_config_unlock (); +} +/** * \brief Frees a private update structure. * \param[in] update The private update structure to free. src/control/control.c +6
-2@@ -968,12 +968,16 @@ static int snd_ctl_open_noupdate(snd_ctl_t **ctlp, snd_config_t *root, const cha*/ int snd_ctl_open (snd_ctl_t **ctlp,const char *name,int mode) { +snd_config_t *top;int err; +assert (ctlp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_ctl_open_noupdate (ctlp, snd_config, name, mode); + err =snd_ctl_open_noupdate (ctlp, top, name, mode); +snd_config_put (top); +return err; }/** src/hwdep/hwdep.c +6
-2@@ -168,12 +168,16 @@ static int snd_hwdep_open_noupdate(snd_hwdep_t **hwdep, snd_config_t *root, cons*/ int snd_hwdep_open (snd_hwdep_t **hwdep,const char *name,int mode) { +snd_config_t *top;int err; +assert (hwdep && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_hwdep_open_noupdate (hwdep, snd_config, name, mode); + err =snd_hwdep_open_noupdate (hwdep, top, name, mode); +snd_config_put (top); +return err; }/** src/pcm/pcm.c +6
-2@@ -2288,12 +2288,16 @@ static int snd_pcm_open_noupdate(snd_pcm_t **pcmp, snd_config_t *root,int snd_pcm_open (snd_pcm_t **pcmp,const char *name,snd_pcm_stream_t stream,int mode) { +snd_config_t *top;int err; +assert (pcmp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_pcm_open_noupdate (pcmp, snd_config, name, stream, mode,0 ); + err =snd_pcm_open_noupdate (pcmp, top, name, stream, mode,0 ); +snd_config_put (top); +return err; }/** src/rawmidi/rawmidi.c +6
-2@@ -305,12 +305,16 @@ static int snd_rawmidi_open_noupdate(snd_rawmidi_t **inputp, snd_rawmidi_t **outint snd_rawmidi_open (snd_rawmidi_t **inputp,snd_rawmidi_t **outputp,const char *name,int mode) { +snd_config_t *top;int err; +assert ((inputp || outputp) && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_rawmidi_open_noupdate (inputp, outputp, snd_config, name, mode); + err =snd_rawmidi_open_noupdate (inputp, outputp, top, name, mode); +snd_config_put (top); +return err; }/** src/seq/seq.c +6
-2@@ -974,12 +974,16 @@ static int snd_seq_open_noupdate(snd_seq_t **seqp, snd_config_t *root,int snd_seq_open (snd_seq_t **seqp,const char *name,int streams,int mode) { +snd_config_t *top;int err; +assert (seqp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_seq_open_noupdate (seqp, snd_config, name, streams, mode,0 ); + err =snd_seq_open_noupdate (seqp, top, name, streams, mode,0 ); +snd_config_put (top); +return err; }/** src/timer/timer.c +6
-2@@ -201,12 +201,16 @@ static int snd_timer_open_noupdate(snd_timer_t **timer, snd_config_t *root, cons*/ int snd_timer_open (snd_timer_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/** src/timer/timer_query.c +6
-2@@ -159,12 +159,16 @@ static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t*/ int snd_timer_query_open (snd_timer_query_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_query_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_query_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
Signature · 1 line
Alexander E. Patrakov
Quoted 92 lines · Alexander E. Patrakov
2016-05-13 20:04 GMT+05:00 Takashi Iwai <[email protected]>:
Quoted 84 lines
Quoted 82 lines · Takashi Iwai
Quoted 60 lines · Takashi Iwai
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?Quoted 8 lines
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling
snd_config_update_free_global()beforehand.There is a minimal protection by pthread mutex in
conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.So here is a quick hack. It adds a simple refcount in
snd_config_t.snd_config_update_get()gives a top config with a refcount so that it won't be deleted until disposed bysnd_config_put().In this patch, the config update itself is kept in traditional way, i.e. lazy update with mtime check. For the forced refresh, I added
snd_config_refresh()which removessnd_config_global_updateso that at the nextsnd_config_update()will reread properly. PA can call this function appropriately, e.g. when hotplugged.Quoted 5 lines
Quoted 2 lines
The patch is just a proof of concept and even untested. Once when confirmed that it's the way to go, I'll cook up more.
There was a typo indeed. The revised patch is below. aplay worked at least :) And now it has comments.
Quoted 8 lines
I will test it tomorrow.
However, now (it's 04:51 localtime, and I still can't sleep) I can't understand whether
snd_config_refresh()can be called safely at all when something is playing to a hooks pcm with "ctl_elems" type (and that use case is important for PulseAudio). Are the names of the controls copied from the config with something like strdup (then it's OK), or just point to a live structure that you are about to refresh?
IIRC, the config parser reads and builds the whole from the scratch at each time.
Takashi
13.05.2016 20:04, Takashi Iwai пишет:
Quoted 84 lines
Quoted 82 lines · Takashi Iwai
Quoted 60 lines · Takashi Iwai
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?Quoted 8 lines
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling
snd_config_update_free_global()beforehand.There is a minimal protection by pthread mutex in
conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.So here is a quick hack. It adds a simple refcount in
snd_config_t.snd_config_update_get()gives a top config with a refcount so that it won't be deleted until disposed bysnd_config_put().In this patch, the config update itself is kept in traditional way, i.e. lazy update with mtime check. For the forced refresh, I added
snd_config_refresh()which removessnd_config_global_updateso that at the nextsnd_config_update()will reread properly. PA can call this function appropriately, e.g. when hotplugged.
Quoted 5 lines
Quoted 2 lines
The patch is just a proof of concept and even untested. Once when confirmed that it's the way to go, I'll cook up more.
There was a typo indeed. The revised patch is below. aplay worked at least :) And now it has comments.
I have read the patch, and also tested with aplay, speaker-test and pulseaudio.
Here are my thoughts so far.
First, the patch combines two separate logical changes: proper locking and refcounting.
Locking looks almost OK (one small issue with snd_config_delete() and two "maybe" suggestions, see below). The mutex is recursive, so e.g. calling snd_ctl_open() from PCM hooks (and thus from inside snd_pcm_open()) is not a problem.
Regarding the new snd_config_refresh() API, do we really need it? There are precedents of applications (e.g. Phonon) using snd_config_update_free_global() for the same purpose. The only new thing that snd_config_refresh() brings is the guarantee that it either does not exist or does proper locking.
It may be, instead, a good idea to add the same kind of locking to snd_config_update_free_global(). And maybe to snd_config_update()? Ideally, I would like to be able to safely call snd_config_update_free_global() at any time in a multithreaded application that does not call any other snd_config_*() functions directly.
Now to refcounting.
The new functions, snd_config_update_get()/snd_config_put(), as a new public API, have received zero testing from me. With this patch, snd_config_delete() will be called sometimes on snd_config, but so far in my testing with aplay and speaker-test the relevant refcount is > 0. So it looks like there is no danger for existing applications.
As snd_config_delete() is still public API, it looks like there is a (bad) code path that accesses refcount without locking. Fixing it would require adding a lock to snd_config_delete(), but then what's the point of snd_config_put()?
I have also investigated the hooks PCM specifically for the question whether it is safe to refresh the config while such PCM is open, and found that, eventually, the control name is copied. This is done in snd_ctl_elem_id_set_name. So this particular PCM type seems to be safe.
Also, I have tried a patched pulseaudio. The patch adds a call to snd_config_refresh() in pa_alsa_open_by_device_string. It now interacts with a hot-plugged USB device successfully. But so it does if I call snd_config_update_free_global() (except for locking).
And I still think that I need to do come more testing...
Signature · 1 line
Alexander E. Patrakov
Quoted 256 lines
Takashi
---
include/conf.h +4
-0@@ -94,6 +94,10 @@ int snd_config_update_r(snd_config_t **top, snd_config_update_t **update, constint snd_config_update_free (snd_config_update_t *update);int snd_config_update_free_global (void ); +void snd_config_refresh (void ); +int snd_config_update_get (snd_config_t **top); +void snd_config_put (snd_config_t *top); +int snd_config_search (snd_config_t *config,const char *key,snd_config_t **result); int snd_config_searchv(snd_config_t *config,src/conf.c +59
-0@@ -434,6 +434,7 @@ static pthread_once_t snd_config_update_mutex_once = PTHREAD_ONCE_INIT;struct _snd_config {char *id;snd_config_type_t type; +int refcount;/* default = 0 */ union {long integer;long long integer64;@@ -1833,6 +1834,10 @@ int snd_config_remove(snd_config_t *config)int snd_config_delete (snd_config_t *config) {assert (config); +if (config->refcount >0 ) { + config->refcount--; +return 0 ; + }switch (config->type) {case SND_CONFIG_TYPE_COMPOUND : {@@ -3851,6 +3856,60 @@ int snd_config_update(void)return err; } +/** +* \brief Clear the local config update cache +* +* This function clears the local config update cache to guarantee that +* the next call of #snd_config_update will reread the config files. +*/ +void snd_config_refresh (void ) +{ +snd_config_lock (); +if (snd_config_global_update) +snd_config_update_free (snd_config_global_update); + snd_config_global_update =NULL ; +snd_config_unlock (); +} + +/** +* \brief Updates #snd_config and take its reference. +* \return 0 if #snd_config was up to date, 1 if #snd_config was +* updated, otherwise a negative error code. +* +* Unlike #snd_config_update, this function increases a reference counter +* so that the obtained tree won't be deleted until unreferenced by +* #snd_config_put. +*/ +int snd_config_update_get (snd_config_t **top) +{ +int err; + + *top =NULL ; +snd_config_lock (); + err =snd_config_update_r (&snd_config, &snd_config_global_update,NULL ); +if (err >=0 ) { + *top = snd_config; +if (*top) + (*top)->refcount++; + } +snd_config_unlock (); +return err; +} + +/** +* \brief Unreference the config tree. +* +* Decreases a reference counter of the given config tree. This is the +* counterpart of #snd_config_update_get. +*/ +void snd_config_put (snd_config_t *cfg) +{ +snd_config_lock (); +if (cfg) +snd_config_delete (cfg); +snd_config_unlock (); +} +/** * \brief Frees a private update structure. * \param[in] update The private update structure to free. src/control/control.c +6
-2@@ -968,12 +968,16 @@ static int snd_ctl_open_noupdate(snd_ctl_t **ctlp, snd_config_t *root, const cha*/ int snd_ctl_open (snd_ctl_t **ctlp,const char *name,int mode) { +snd_config_t *top;int err; +assert (ctlp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_ctl_open_noupdate (ctlp, snd_config, name, mode); + err =snd_ctl_open_noupdate (ctlp, top, name, mode); +snd_config_put (top); +return err; }/** src/hwdep/hwdep.c +6
-2@@ -168,12 +168,16 @@ static int snd_hwdep_open_noupdate(snd_hwdep_t **hwdep, snd_config_t *root, cons*/ int snd_hwdep_open (snd_hwdep_t **hwdep,const char *name,int mode) { +snd_config_t *top;int err; +assert (hwdep && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_hwdep_open_noupdate (hwdep, snd_config, name, mode); + err =snd_hwdep_open_noupdate (hwdep, top, name, mode); +snd_config_put (top); +return err; }/** src/pcm/pcm.c +6
-2@@ -2288,12 +2288,16 @@ static int snd_pcm_open_noupdate(snd_pcm_t **pcmp, snd_config_t *root,int snd_pcm_open (snd_pcm_t **pcmp,const char *name,snd_pcm_stream_t stream,int mode) { +snd_config_t *top;int err; +assert (pcmp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_pcm_open_noupdate (pcmp, snd_config, name, stream, mode,0 ); + err =snd_pcm_open_noupdate (pcmp, top, name, stream, mode,0 ); +snd_config_put (top); +return err; }/** src/rawmidi/rawmidi.c +6
-2@@ -305,12 +305,16 @@ static int snd_rawmidi_open_noupdate(snd_rawmidi_t **inputp, snd_rawmidi_t **outint snd_rawmidi_open (snd_rawmidi_t **inputp,snd_rawmidi_t **outputp,const char *name,int mode) { +snd_config_t *top;int err; +assert ((inputp || outputp) && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_rawmidi_open_noupdate (inputp, outputp, snd_config, name, mode); + err =snd_rawmidi_open_noupdate (inputp, outputp, top, name, mode); +snd_config_put (top); +return err; }/** src/seq/seq.c +6
-2@@ -974,12 +974,16 @@ static int snd_seq_open_noupdate(snd_seq_t **seqp, snd_config_t *root,int snd_seq_open (snd_seq_t **seqp,const char *name,int streams,int mode) { +snd_config_t *top;int err; +assert (seqp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_seq_open_noupdate (seqp, snd_config, name, streams, mode,0 ); + err =snd_seq_open_noupdate (seqp, top, name, streams, mode,0 ); +snd_config_put (top); +return err; }/** src/timer/timer.c +6
-2@@ -201,12 +201,16 @@ static int snd_timer_open_noupdate(snd_timer_t **timer, snd_config_t *root, cons*/ int snd_timer_open (snd_timer_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/** src/timer/timer_query.c +2
-1@@ -159,12 +159,16 @@ static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t*/ int snd_timer_query_open (snd_timer_query_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update ();
src/timer/timer_query.c static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t · line 174
Quoted 10 lines
src/timer/timer_query.c +4
-1+ err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_query_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_query_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 97 lines · Alexander E. Patrakov
13.05.2016 20:04, Takashi Iwai пишет:
Quoted 84 lines
Quoted 82 lines · Takashi Iwai
Quoted 60 lines · Takashi Iwai
Quoted 19 lines · Alexander E. Patrakov
Quoted 10 lines · Takashi Iwai
Quoted 6 lines · Alexander E. Patrakov
Even if no files have been changed, the config may become outdated due to hot-plugged devices.
Note: this patch has a huge potential to crash badly-written applications that keep config pointers and strings for too long. But I see no other way to support hot-pluggable devices.
Can we opt in this feature, e.g. by enabling it via some new API function? Enabling this blindly appears too risky.
Hello Takashi,
I have read your remark, and your concern does make sense. However, I have some doubts whether any new API is needed, and some suggestions for further changes. Here are my ideas.
Quoted 6 lines
1. We already have such API. It is called
snd_config_top(),snd_config_update_r()andsnd_pcm_open_lconf(). Would you accept a documentation patch that says thatsnd_pcm_opencannot deal with hot-plugged devices, and directs users tosnd_pcm_open_lconf()? Of course, this depends on Tanu's willingness to accept conversion tosnd_pcm_open_lconf()in PulseAudio.Yeah, it'd be good to mention there.
Quoted 8 lines
2. Even if a user calls
snd_pcm_open_lconf(), currently, when attempting to figure out the driver, mixer configuration is updated withsnd_config_update()- i.e. global configuration is updated, and this IMHO defeats the point of having a separate configuration. To fix the bug, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_lconf(). I am not sure about the difficulty of this task.Quoted 9 lines
3. One of my early attempts of the patch (without the hunk about
snd_ctl_open_lconf()) was crashing due to bad pointers. Now I realize that it is already a bug in alsa-lib - the current code would crash, too, if the configuration file has changed between the calls tosnd_pcm_update()insnd_pcm_open()and insnd_ctl_open()(which is called from a hook that determines the driver). Again, I would need to make sure that the mixer configuration is read from the samesnd_config_tstructure that was passed tosnd_pcm_open_noupdate(), see above.Right. The crash doesn't happen so often because the update of config tree doesn't happen also so often.
Quoted 7 lines
4. I still think that the file mtime check in
snd_config_update_rdoes not make any sense. It fails to notice changes in included files, as well as in the list of plugged-in devices. In other words, it never worked except for the initial read, and it's too risky to make it actually work as documented. How about making it read the configuration from files only on the first call for a given config, even if they have changed?Quoted 8 lines
Yes, that sounds more reasonable as a first move. It doesn't work 100% reliably, and if you really want a proper update, you can do it by calling
snd_config_update_free_global()beforehand.There is a minimal protection by pthread mutex in
conf.c, but it's only at regenerating the config tree. We need refcounting by referrer for a proper protection. Once after having the refcount protection, we can safely update the config tree unconditionally.So here is a quick hack. It adds a simple refcount in
snd_config_t.snd_config_update_get()gives a top config with a refcount so that it won't be deleted until disposed bysnd_config_put().In this patch, the config update itself is kept in traditional way, i.e. lazy update with mtime check. For the forced refresh, I added
snd_config_refresh()which removessnd_config_global_updateso that at the nextsnd_config_update()will reread properly. PA can call this function appropriately, e.g. when hotplugged.Quoted 5 lines
Quoted 2 lines
The patch is just a proof of concept and even untested. Once when confirmed that it's the way to go, I'll cook up more.
There was a typo indeed. The revised patch is below. aplay worked at least :) And now it has comments.
I have read the patch, and also tested with aplay, speaker-test and pulseaudio.
Here are my thoughts so far.
Quoted 7 lines
First, the patch combines two separate logical changes: proper locking and refcounting.
Locking looks almost OK (one small issue with
snd_config_delete()and two "maybe" suggestions, see below). The mutex is recursive, so e.g. callingsnd_ctl_open()from PCM hooks (and thus from insidesnd_pcm_open()) is not a problem.
There is nothing new in regard of locking. It existed before the patch, snd_config_update() and snd_config_update_free_global() already took it. So, this must be pretty safe even in the new code.
Quoted 5 lines
Regarding the new
snd_config_refresh()API, do we really need it? There are precedents of applications (e.g. Phonon) usingsnd_config_update_free_global()for the same purpose. The only new thing thatsnd_config_refresh()brings is the guarantee that it either does not exist or does proper locking.
OK, this can be removed. I thought it would be nicer, but reducing the unneeded API would be better indeed.
Quoted 6 lines
It may be, instead, a good idea to add the same kind of locking to
snd_config_update_free_global(). And maybe tosnd_config_update()? Ideally, I would like to be able to safely callsnd_config_update_free_global()at any time in a multithreaded application that does not call any other snd_config_*() functions directly.
As said, snd_config_update() and snd_config_update_free_global() have already locks and they can be called safely. The problem is that the tree itself that is being used in snd_*_open() (i.e. snd_config global tree) isn't race-free. The introduction of refcount helps for that.
Quoted 8 lines
Now to refcounting.
The new functions, snd_config_update_get()/snd_config_put(), as a new public API, have received zero testing from me. With this patch,
snd_config_delete()will be called sometimes onsnd_config, but so far in my testing with aplay and speaker-test the relevant refcount is >
0. So it looks like there is no danger for existing applications.
Quoted 4 lines
As
snd_config_delete()is still public API, it looks like there is a (bad) code path that accesses refcount without locking. Fixing it would require adding a lock tosnd_config_delete(), but then what's the point ofsnd_config_put()?
The difference is that snd_config_delete() can't be protected with mutex, as this function itself is called recursively from the destructor in the mutex. So, we may see snd_config_delete() as a function to delete the local tree while snd_config_put() (or maybe better named as snd_config_unref() or such) is a function to unreference (and eventually delete) the tree in a thread safe way.
Takashi
Quoted 6 lines
I have also investigated the hooks PCM specifically for the question whether it is safe to refresh the config while such PCM is open, and found that, eventually, the control name is copied. This is done in
snd_ctl_elem_id_set_name. So this particular PCM type seems to be safe.
Quoted 277 lines
Also, I have tried a patched pulseaudio. The patch adds a call to
snd_config_refresh()inpa_alsa_open_by_device_string. It now interacts with a hot-plugged USB device successfully. But so it does if I callsnd_config_update_free_global()(except for locking).And I still think that I need to do come more testing...
Signature · 1 line
Alexander E. PatrakovQuoted 256 lines
Takashi
---
include/conf.h +4
-0@@ -94,6 +94,10 @@ int snd_config_update_r(snd_config_t **top, snd_config_update_t **update, constint snd_config_update_free (snd_config_update_t *update);int snd_config_update_free_global (void ); +void snd_config_refresh (void ); +int snd_config_update_get (snd_config_t **top); +void snd_config_put (snd_config_t *top); +int snd_config_search (snd_config_t *config,const char *key,snd_config_t **result); int snd_config_searchv(snd_config_t *config,src/conf.c +59
-0@@ -434,6 +434,7 @@ static pthread_once_t snd_config_update_mutex_once = PTHREAD_ONCE_INIT;struct _snd_config {char *id;snd_config_type_t type; +int refcount;/* default = 0 */ union {long integer;long long integer64;@@ -1833,6 +1834,10 @@ int snd_config_remove(snd_config_t *config)int snd_config_delete (snd_config_t *config) {assert (config); +if (config->refcount >0 ) { + config->refcount--; +return 0 ; + }switch (config->type) {case SND_CONFIG_TYPE_COMPOUND : {@@ -3851,6 +3856,60 @@ int snd_config_update(void)return err; } +/** +* \brief Clear the local config update cache +* +* This function clears the local config update cache to guarantee that +* the next call of #snd_config_update will reread the config files. +*/ +void snd_config_refresh (void ) +{ +snd_config_lock (); +if (snd_config_global_update) +snd_config_update_free (snd_config_global_update); + snd_config_global_update =NULL ; +snd_config_unlock (); +} + +/** +* \brief Updates #snd_config and take its reference. +* \return 0 if #snd_config was up to date, 1 if #snd_config was +* updated, otherwise a negative error code. +* +* Unlike #snd_config_update, this function increases a reference counter +* so that the obtained tree won't be deleted until unreferenced by +* #snd_config_put. +*/ +int snd_config_update_get (snd_config_t **top) +{ +int err; + + *top =NULL ; +snd_config_lock (); + err =snd_config_update_r (&snd_config, &snd_config_global_update,NULL ); +if (err >=0 ) { + *top = snd_config; +if (*top) + (*top)->refcount++; + } +snd_config_unlock (); +return err; +} + +/** +* \brief Unreference the config tree. +* +* Decreases a reference counter of the given config tree. This is the +* counterpart of #snd_config_update_get. +*/ +void snd_config_put (snd_config_t *cfg) +{ +snd_config_lock (); +if (cfg) +snd_config_delete (cfg); +snd_config_unlock (); +} +/** * \brief Frees a private update structure. * \param[in] update The private update structure to free. src/control/control.c +6
-2@@ -968,12 +968,16 @@ static int snd_ctl_open_noupdate(snd_ctl_t **ctlp, snd_config_t *root, const cha*/ int snd_ctl_open (snd_ctl_t **ctlp,const char *name,int mode) { +snd_config_t *top;int err; +assert (ctlp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_ctl_open_noupdate (ctlp, snd_config, name, mode); + err =snd_ctl_open_noupdate (ctlp, top, name, mode); +snd_config_put (top); +return err; }/** src/hwdep/hwdep.c +6
-2@@ -168,12 +168,16 @@ static int snd_hwdep_open_noupdate(snd_hwdep_t **hwdep, snd_config_t *root, cons*/ int snd_hwdep_open (snd_hwdep_t **hwdep,const char *name,int mode) { +snd_config_t *top;int err; +assert (hwdep && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_hwdep_open_noupdate (hwdep, snd_config, name, mode); + err =snd_hwdep_open_noupdate (hwdep, top, name, mode); +snd_config_put (top); +return err; }/** src/pcm/pcm.c +6
-2@@ -2288,12 +2288,16 @@ static int snd_pcm_open_noupdate(snd_pcm_t **pcmp, snd_config_t *root,int snd_pcm_open (snd_pcm_t **pcmp,const char *name,snd_pcm_stream_t stream,int mode) { +snd_config_t *top;int err; +assert (pcmp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_pcm_open_noupdate (pcmp, snd_config, name, stream, mode,0 ); + err =snd_pcm_open_noupdate (pcmp, top, name, stream, mode,0 ); +snd_config_put (top); +return err; }/** src/rawmidi/rawmidi.c +6
-2@@ -305,12 +305,16 @@ static int snd_rawmidi_open_noupdate(snd_rawmidi_t **inputp, snd_rawmidi_t **outint snd_rawmidi_open (snd_rawmidi_t **inputp,snd_rawmidi_t **outputp,const char *name,int mode) { +snd_config_t *top;int err; +assert ((inputp || outputp) && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_rawmidi_open_noupdate (inputp, outputp, snd_config, name, mode); + err =snd_rawmidi_open_noupdate (inputp, outputp, top, name, mode); +snd_config_put (top); +return err; }/** src/seq/seq.c +6
-2@@ -974,12 +974,16 @@ static int snd_seq_open_noupdate(snd_seq_t **seqp, snd_config_t *root,int snd_seq_open (snd_seq_t **seqp,const char *name,int streams,int mode) { +snd_config_t *top;int err; +assert (seqp && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_seq_open_noupdate (seqp, snd_config, name, streams, mode,0 ); + err =snd_seq_open_noupdate (seqp, top, name, streams, mode,0 ); +snd_config_put (top); +return err; }/** src/timer/timer.c +6
-2@@ -201,12 +201,16 @@ static int snd_timer_open_noupdate(snd_timer_t **timer, snd_config_t *root, cons*/ int snd_timer_open (snd_timer_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update (); + err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/** src/timer/timer_query.c +2
-1@@ -159,12 +159,16 @@ static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t*/ int snd_timer_query_open (snd_timer_query_t **timer,const char *name,int mode) { +snd_config_t *top;int err; +assert (timer && name); - err =snd_config_update ();src/timer/timer_query.c static int snd_timer_query_open_noupdate(snd_timer_query_t **timer, snd_config_t · line 174
Quoted 10 lines
src/timer/timer_query.c +4
-1+ err =snd_config_update_get (&top);if (err <0 )return err; -return snd_timer_query_open_noupdate (timer, snd_config, name, mode); + err =snd_timer_query_open_noupdate (timer, top, name, mode); +snd_config_put (top); +return err; }/**
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel