Skip to contentSkip to conversation

Slackware, RAID1 problem

DISCUSSION Ralica Kirilova 1 participant 1 message Apr 15, 2004

lore
Share & tools
lore
#0 lore raw

Hi all,
I have a big problem with this RAID thing :)
My system is Linux Slackware 9.1, uname -r --> 2.4.22
I have two SCSI disks (SEAGATE)
I use this howtos
http://slacksite.com/slackware/raid.html
http://unthought.net/Software-RAID.HOWTO/Software-RAID.HOWTO-1.html
And many more ofcourse.
1. So I install Linux on scsi 2 (with kernel supporting raid & scsi)
2. make partitions on scsi 1 of fd type.
3. Then creating md0, md1 , etc...
4. Next step is to mount /dev/md0 and cp the system there.
5. then edit /etc/fstab & /etc/lilo.conf
6. lilo -r /mnt, lilo, lilo -q, etc. Here is the problem.
After reboot the *old* lilo.conf is started (also are the raid arrays :) ).

I don't know if I explained it right.

Any help is appriciated :)

P.S. Sorry for my bad english.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs