Skip to contentSkip to conversation

mark

LARTC Paulo Andre 3 participants 3 messages Mar 26, 2004 – Oct 26, 2004

lore
Share & tools
lore
#0 lore raw

I have the following scenerio,
LINK-A and LINK-B connected SRV. Current default gw is LINK-B

I would like for all packets from LINK-A to have LINK-IP-A as default gw.

have done following:

iptables -t mangle -A PREROUTING -i INT-A -j MARK --set-mark 4

ip route add table 4 default via LINK-IP-A
ip rule add fwmark 4 table 4

When I ping the interface from the web, then I do not get a reply, tcpdump and iptables show the packets coming in but not going out.
1- am I doing this correctly?
2- how can I definitely find out that the packets are being marked? 3- how can I test my iproute2?

Paulo
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

folks,

when marking a packet to band control , what is the diffent between:

iptables -t mangle -A PREROUTING -m p2p --p2p all -j CONNMARK --set-mark $P2P_MARK
iptables -t mangle -A PREROUTING -m connmark --mark $P2P_MARK -j CONNMARK --restore-mark

and

iptables -t mangle -A PREROUTING -m p2p --p2p all -j MARK --set-mark $P2P_MARK

??????

tried to "patch-o-matic" with connmark and didnot work out (kernel 2.6.9)... .. it works ok with 2.4.x

thanks any help

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Paulo Andre

On Tue, 26 Oct 2004 01:43:43 -0200, James Lista wrote

Quoted 1 line

folks,

Hello James.

Quoted 11 lines

when marking a packet to band control , what is the diffent between:

iptables -t mangle -A PREROUTING -m p2p --p2p all -j CONNMARK --set-mark $P2P_MARK
iptables -t mangle -A PREROUTING -m connmark --mark $P2P_MARK -j CONNMARK --restore-mark

and

iptables -t mangle -A PREROUTING -m p2p --p2p all -j MARK --set-mark $P2P_MARK

Each p2p connection is composed of many ip packets. p2p match is sensible for some specific data fields in some these packets. So if you mark only these packets all other packets (with p2p application data) wont be marked and you wont limit transfer. Second line in first example marks CONNECTIONs (not packets) belonged to p2p connection (detected by p2p match). Using second method has not effect as you would wish.

Quoted 4 lines

??????

tried to "patch-o-matic" with connmark and didnot work out (kernel 2.6.9)... .. it works ok with 2.4.x

It works for me with 2.4.x too. I didnt tried with 2.6.x.

--
Kind regards,
Tomasz Chilinski

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/