Deploy to a hard drive
Follow the Wiki instructions:
1) have a suitable partition on the disk - say partition #3
2) this partition will show up as sde3 on my host machine and sda3 on the atom
3) mkfs.ext3 /dev/sde3
4) mount /dev/sde3 /mnt/target
5) mount -o loop tmp/deploy/images/core-image-sato-sdk.ext3 /mnt/target-text3
6) cp -a /mnt/target-ext3/* /mnt/target
7) grub-install --recheck --root-directory=/mnt/target /dev/sde
When I do step 4, I get "mount: mount point /mnt/target does not exist"
What am I missing?
I am using Ubuntu 10.4 LTS 32-bit.
Regards,
Sean
Need mkdir /mnt/target and mnt/target-ext before step 4
Sent from my Kindle Fire
_____________________________________________
From: Sean Liming <[email protected]>
Sent: Sat Feb 11 16:13:33 EST 2012
To: [email protected]
Subject: [yocto] Deploy to a hard drive
Follow the Wiki instructions:
1) have a suitable partition on the disk - say partition #3
2) this partition will show up as sde3 on my host machine and sda3 on the atom
3) mkfs.ext3 /dev/sde3
4) mount /dev/sde3 /mnt/target
5) mount -o loop tmp/deploy/images/core-image-sato-sdk.ext3 /mnt/target-text3
6) cp -a /mnt/target-ext3/* /mnt/target
7) grub-install --recheck --root-directory=/mnt/target /dev/sde
When I do step 4, I get “mount: mount point /mnt/target does not exist”
What am I missing?
I am using Ubuntu 10.4 LTS 32-bit.
Regards,
Sean
Created those directories. I just got past this error as it looks like / before mnt is not needed.
Step 7 required that I use the –force switch.
1. There is no bzImage in the /boot folder – was there an extra step
2. Cannot add the grub.cfg since it appears locked.
Regards,
Sean
From: Jim Abernathy [mailto:[email protected]]
Sent: Saturday, February 11, 2012 1:23 PM
To: Sean Liming; [email protected]
Subject: Re: [yocto] Deploy to a hard drive
Need mkdir /mnt/target and mnt/target-ext before step 4
Sent from my Kindle Fire
_____
From: Sean Liming <[email protected]>
Sent: Sat Feb 11 16:13:33 EST 2012
To: [email protected]
Subject: [yocto] Deploy to a hard drive
Follow the Wiki instructions:
1) have a suitable partition on the disk - say partition #3
2) this partition will show up as sde3 on my host machine and sda3 on the atom
3) mkfs.ext3 /dev/sde3
4) mount /dev/sde3 /mnt/target
5) mount -o loop tmp/deploy/images/core-image-sato-sdk.ext3 /mnt/target-text3
6) cp -a /mnt/target-ext3/* /mnt/target
7) grub-install --recheck --root-directory=/mnt/target /dev/sde
When I do step 4, I get “mount: mount point /mnt/target does not exist”
What am I missing?
I am using Ubuntu 10.4 LTS 32-bit.
Regards,
Sean
I figured out the last problem, and the system boots to the drive.
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176
From: [email protected] [mailto:[email protected]] On Behalf Of Sean Liming
Sent: Saturday, February 11, 2012 2:13 PM
To: 'Jim Abernathy'; [email protected]
Subject: Re: [yocto] Deploy to a hard drive
Created those directories. I just got past this error as it looks like / before mnt is not needed.
Step 7 required that I use the –force switch.
1. There is no bzImage in the /boot folder – was there an extra step
2. Cannot add the grub.cfg since it appears locked.
Regards,
Sean
From: Jim Abernathy [mailto:[email protected]]
Sent: Saturday, February 11, 2012 1:23 PM
To: Sean Liming; [email protected]
Subject: Re: [yocto] Deploy to a hard drive
Need mkdir /mnt/target and mnt/target-ext before step 4
Sent from my Kindle Fire
_____
From: Sean Liming <[email protected]>
Sent: Sat Feb 11 16:13:33 EST 2012
To: [email protected]
Subject: [yocto] Deploy to a hard drive
Follow the Wiki instructions:
1) have a suitable partition on the disk - say partition #3
2) this partition will show up as sde3 on my host machine and sda3 on the atom
3) mkfs.ext3 /dev/sde3
4) mount /dev/sde3 /mnt/target
5) mount -o loop tmp/deploy/images/core-image-sato-sdk.ext3 /mnt/target-text3
6) cp -a /mnt/target-ext3/* /mnt/target
7) grub-install --recheck --root-directory=/mnt/target /dev/sde
When I do step 4, I get “mount: mount point /mnt/target does not exist”
What am I missing?
I am using Ubuntu 10.4 LTS 32-bit.
Regards,
Sean