Skip to contentSkip to conversation

Possible SCSI or ISOFS Bug in 2.4.0-test11

DISCUSSION Niels Happel 2 participants 2 messages Nov 27, 2000

lore
Share & tools
lore
#0 lore raw

Hello everybody,

first of all: I am new to the linux-kernel list, so I don't know wheather writing here is allowed for everybody or developers only.

Anyway, here it is:

Hardware (SCSI-only system):

Tekram 390 U2W (SYM53C8XX support compiled into the kernel) IBM U2W SCSI disks
HP DAT SCSI Streamer
Pioneer SCSI DVD
Yamaha SCSI CD R/W

Using kernel 2.4.0-test10 and earlier everything works fine. Using 2.4.0-test11 with the same kernel configuration an error message occured while accessing one of the mounted SCSI CD-ROMs:
"kernel: _isofs_bmap: block < 0"
Mounting them works fine, accessing them gives that error message. It can't be an SCSI CD-ROM hardware failure, because the error message occured at both drives (Pioneer and Yamaha) and it doesn't matter which CD-ROM I am using.

Any hints?

Signature · 8 lines
Many greetings, 
                    Niels!

[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#1 lore raw

Re: Possible ISOFS Bug in 2.4.0-test11-pre7

Quoted 15 lines · Niels Happel

Hello everybody,

first of all: I am new to the linux-kernel list, so I don't know wheather writing here is allowed for everybody or developers only.

Anyway, here it is:

Hardware (SCSI-only system):

Tekram 390 U2W (SYM53C8XX support compiled into the kernel) IBM U2W SCSI disks
HP DAT SCSI Streamer
Pioneer SCSI DVD
Yamaha SCSI CD R/W

Quoted 9 lines

Using kernel 2.4.0-test10 and earlier everything works fine. Using 2.4.0-test11 with the same kernel configuration an error message occured while accessing one of the mounted SCSI CD-ROMs:
"kernel: _isofs_bmap: block < 0"
Mounting them works fine, accessing them gives that error message. It can't be an SCSI CD-ROM hardware failure, because the error message occured at both drives (Pioneer and Yamaha) and it doesn't matter which CD-ROM I am using.

Same problem with ide-cs + ide-cd modules (IDE - PCMCIA)
kernel: _isofs_bmap: block < 0"

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/