Skip to contentSkip to conversation

MinGW port updated to 1.5.2

DISCUSSION Johannes Sixt 3 participants 8 messages Jun 15, 2016 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

This minute I've pushed the MinGW port, which is now at 1.5.2 to:

gitweb:     http://repo.or.cz/w/git/mingw.git
pull/clone: git://repo.or.cz/git/mingw.git

In addition to the 1.5.2 features, the progress indicator is shown in more places (most notably when "Counting objects"), and GIT_EXTERNAL_DIFF works now.

-- Hannes

#1 lore raw

Johannes Sixt escreveu:

Quoted 8 lines

This minute I've pushed the MinGW port, which is now at 1.5.2 to:

gitweb:     http://repo.or.cz/w/git/mingw.git
pull/clone: git://repo.or.cz/git/mingw.git

In addition to the 1.5.2 features, the progress indicator is shown in more places (most notably when "Counting objects"), and GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.

Signature · 1 line
 Han-Wen Nienhuys - [email protected] - http://www.xs4all.nl/~hanwen
#2 lore raw
Quoted 6 lines

Johannes Sixt escreveu:

Quoted 5 lines

This minute I've pushed the MinGW port, which is now at 1.5.2 to:

gitweb:     http://repo.or.cz/w/git/mingw.git
pull/clone: git://repo.or.cz/git/mingw.git
Quoted 7 lines
Quoted 3 lines

In addition to the 1.5.2 features, the progress indicator is shown in more places (most notably when "Counting objects"), and GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. What is going on here please ?

Thanks,

Aaron

#3 lore raw

Aaron Gray escreveu:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. What is going on here please ?

this uses the same buildscripts as before, so if it worked, it should still work. The path should point to $PF/Git/usr/bin/ ; you might need to log out and log in again for the path to visible.

Signature · 1 line
 Han-Wen Nienhuys - [email protected] - http://www.xs4all.nl/~hanwen
#4 lore raw
Quoted 5 lines

Aaron Gray escreveu:

Quoted 4 lines
Quoted 4 lines
Quoted 1 line

GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. What is going on here please ?

this uses the same buildscripts as before, so if it worked, it should still work. The path should point to $PF/Git/usr/bin/ ; you might need to log out and log in again for the path to visible.

Still not working properly.

Quoted 3 lines

From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

From MSYS '/usr/share/git-core/templates/' is not accessable.

   $ git clone git://git.kernel.org/pub/scm/git/git.git
   Initialized empty Git repository in C:/MSYS/home/Aaron Gray/git/.git/
   warning: templates not found /usr/share/git-core/templates/

Another issue is git-clone is no atomic if it fails it leaves an open file that can only be deleted by logging off and on again.

Aaron

#5 lore raw

Aaron Gray escreveu:

Quoted 10 lines
Quoted 10 lines

Aaron Gray escreveu:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. What is going on here please ?

Quoted 7 lines
Quoted 3 lines

this uses the same buildscripts as before, so if it worked, it should still work. The path should point to $PF/Git/usr/bin/ ; you might need to log out and log in again for the path to visible.

Still not working properly.

From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

- does the registry key HKLM SYSTEM\CurrentControlSet\Control\Session Manager\Environment contain a PATH variable containing /Program Files/Git/usr/bin as an entry?

- what is the value of the PATH variable in CMD ?

- if this doens't work, please uninstall (run uninstall.exe) and rerun the installer from the command line with the /S switch; this should generate an install.log in $PF/Git/ . Send this to the list, or, if it's very big, send send by private mail.

Signature · 1 line
 Han-Wen Nienhuys - [email protected] - http://www.xs4all.nl/~hanwen

A message that is not in the archive (sent off-list or not yet received): 004201c79fe7$f16b47b0$0200a8c0@AMD2500

#7 lore raw

Aaron Gray escreveu:

Quoted 22 lines
Quoted 16 lines

Aaron Gray escreveu:

Quoted 15 lines
Quoted 14 lines

Aaron Gray escreveu:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. What is going on here please ?

this uses the same buildscripts as before, so if it worked, it should still work. The path should point to $PF/Git/usr/bin/ ; you might need to
log out and log in again for the path to visible.

Quoted 5 lines
Quoted 3 lines

Still not working properly.

From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

- what is the value of the PATH variable in CMD ?

Quoted 9 lines

Path=C:\Program Files\GreenBorder\;C:\windows\system32;C:\windows;C:\windows\Sys tem32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;c:\Program Files\
Microsoft SQL Server\90\Tools\binn\;C:\GnuWin32\bin;C:\Program Files\QuickTime\Q
TSystem\;C:\Utils;C:\Program Files\MakeMsi\;c:\MinGW\bin;C:\MinGW\usr\bin;C:\Pro gram Files\Git\usr\bin;C:\Program Files\Git\usr\bin

Can you troubleshoot this for me? As you can see, you have

C:\Program Files\Git\usr\bin

in the path. That AFAIK should be enough to have git.exe run inside CMD. Maybe I'm missing something, but that is as far as my windows knowledge goes.

Signature · 1 line
 Han-Wen Nienhuys - [email protected] - http://www.xs4all.nl/~hanwen
#8 lore raw
Quoted 33 lines

Aaron Gray escreveu:

Quoted 22 lines
Quoted 16 lines

Aaron Gray escreveu:

Quoted 15 lines
Quoted 14 lines

Aaron Gray escreveu:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

GIT_EXTERNAL_DIFF works now.

http://lilypond.org/git/binaries/mingw/

uploading as I speak. Untested.

This installs to "C:\Program Files\Git" and is not availiable on the path. What is going on here please ?

this uses the same buildscripts as before, so if it worked, it should still work. The path should point to $PF/Git/usr/bin/ ; you might need to
log out and log in again for the path to visible.

Quoted 5 lines
Quoted 3 lines

Still not working properly.

From CMD.EXE, neither 'git clone' and 'git-clone' are accessable.

- what is the value of the PATH variable in CMD ?

Quoted 9 lines

Path=C:\Program Files\GreenBorder\;C:\windows\system32;C:\windows;C:\windows\Sys tem32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;c:\Program Files\
Microsoft SQL Server\90\Tools\binn\;C:\GnuWin32\bin;C:\Program Files\QuickTime\Q
TSystem\;C:\Utils;C:\Program Files\MakeMsi\;c:\MinGW\bin;C:\MinGW\usr\bin;C:\Pro gram Files\Git\usr\bin;C:\Program Files\Git\usr\bin

Quoted 7 lines

Can you troubleshoot this for me? As you can see, you have

C:\Program Files\Git\usr\bin

in the path. That AFAIK should be enough to have git.exe run inside CMD. Maybe I'm missing something, but that is as far as my windows knowledge goes.

Git runs, 'git init' runs, but 'git clone' or 'git-clone' do not.

'git init' reports it cannot find '/usr/share/git-core/templates/'

I have no idea whats wrong and do not have the time to try to debug it at present.

Aaron