Exynos3250: add DT node and clock for UART2 and UART3
cover Exynos3250: add DT node and clock for UART2 and UART3
This patch series adds device tree node and missing clock support of UART2 and UART3 for Exynos3250. DT patch is dependent on clock patch.
Pankaj Dubey (2):
clk: samsung: exynos3250: add uart2/3 related clocks
arm: dts: exynos3250: add device node support for serial2 and serial3
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 21 +++++++++++++++++++++ arch/arm/boot/dts/exynos3250.dtsi | 24 ++++++++++++++++++++++++ drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 4 files changed, 65 insertions(+), 1 deletion(-)
Signature · 1 line
1.7.9.5
PATCH 1/2 clk: samsung: exynos3250: add uart2/3 related clocks
Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds missing clock entries for UART2 and UART3.
--- drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)
drivers/clk/samsung/clk-exynos3250.c +11 -0
@@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[] __initdata = {MUX (CLK_MOUT_MMC0 ,"mout_mmc0" , group_sclk_p,SRC_FSYS ,0 ,3 ),/* SRC_PERIL0 */ +MUX (CLK_MOUT_UART3 ,"mout_uart3" , group_sclk_p,SRC_PERIL0 ,12 ,4 ), +MUX (CLK_MOUT_UART2 ,"mout_uart2" , group_sclk_p,SRC_PERIL0 ,8 ,4 ),MUX (CLK_MOUT_UART1 ,"mout_uart1" , group_sclk_p,SRC_PERIL0 ,4 ,4 ), MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
@@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[] __initdata = {DIV (CLK_DIV_MMC0 ,"div_mmc0" ,"mout_mmc0" ,DIV_FSYS1 ,0 ,4 ),/* DIV_PERIL0 */ +DIV (CLK_DIV_UART3 ,"div_uart3" ,"mout_uart3" ,DIV_PERIL0 ,12 ,4 ), +DIV (CLK_DIV_UART2 ,"div_uart2" ,"mout_uart2" ,DIV_PERIL0 ,8 ,4 ),DIV (CLK_DIV_UART1 ,"div_uart1" ,"mout_uart1" ,DIV_PERIL0 ,4 ,4 ), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
@@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[] __initdata = { GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),GATE (CLK_SCLK_SPI0 ,"sclk_spi0" ,"div_spi0_pre" ,GATE_SCLK_PERIL ,6 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART3 ,"sclk_uart3" ,"div_uart3" , +GATE_SCLK_PERIL ,3 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART2 ,"sclk_uart2" ,"div_uart2" , +GATE_SCLK_PERIL ,2 ,CLK_SET_RATE_PARENT ,0 ),GATE (CLK_SCLK_UART1 ,"sclk_uart1" ,"div_uart1" ,GATE_SCLK_PERIL ,1 ,CLK_SET_RATE_PARENT ,0 ), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
@@ -679,6 +687,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {GATE (CLK_USBOTG ,"usbotg" ,"div_aclk_200" ,GATE_IP_FSYS ,13 ,0 ,0 ),GATE (CLK_USBHOST ,"usbhost" ,"div_aclk_200" ,GATE_IP_FSYS ,12 ,0 ,0 ),GATE (CLK_SROMC ,"sromc" ,"div_aclk_200" ,GATE_IP_FSYS ,11 ,0 ,0 ), +GATE (CLK_SDMMC2 ,"sdmmc2" ,"div_aclk_200" ,GATE_IP_FSYS ,7 ,0 ,0 ),GATE (CLK_SDMMC1 ,"sdmmc1" ,"div_aclk_200" ,GATE_IP_FSYS ,6 ,0 ,0 ),GATE (CLK_SDMMC0 ,"sdmmc0" ,"div_aclk_200" ,GATE_IP_FSYS ,5 ,0 ,0 ), GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
@@ -698,6 +707,8 @@ static struct samsung_gate_clock gate_clks[] __initdata = {GATE (CLK_I2C2 ,"i2c2" ,"div_aclk_100" ,GATE_IP_PERIL ,8 ,0 ,0 ),GATE (CLK_I2C1 ,"i2c1" ,"div_aclk_100" ,GATE_IP_PERIL ,7 ,0 ,0 ),GATE (CLK_I2C0 ,"i2c0" ,"div_aclk_100" ,GATE_IP_PERIL ,6 ,0 ,0 ), +GATE (CLK_UART3 ,"uart3" ,"div_aclk_100" ,GATE_IP_PERIL ,3 ,0 ,0 ), +GATE (CLK_UART2 ,"uart2" ,"div_aclk_100" ,GATE_IP_PERIL ,2 ,0 ,0 ),GATE (CLK_UART1 ,"uart1" ,"div_aclk_100" ,GATE_IP_PERIL ,1 ,0 ,0 ), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0), };
include/dt-bindings/clock/exynos3250.h +9 -1
@@ -78,6 +78,8 @@#define CLK_MOUT_CORE 58#define CLK_MOUT_APLL 59#define CLK_MOUT_ACLK_266_SUB 60 +#define CLK_MOUT_UART2 61 +#define CLK_MOUT_UART3 62/* Dividers */ #define CLK_DIV_GPL 64
@@ -126,6 +128,8 @@#define CLK_DIV_CORE 107#define CLK_DIV_HPM 108#define CLK_DIV_COPY 109 +#define CLK_DIV_UART2 110 +#define CLK_DIV_UART3 111/* Gates */ #define CLK_ASYNC_G3D 128
@@ -222,6 +226,8 @@#define CLK_BLOCK_MFC 219#define CLK_BLOCK_CAM 220#define CLK_SMIES 221 +#define CLK_UART2 222 +#define CLK_UART3 223/* Special clocks */ #define CLK_SCLK_JPEG 224
@@ -248,11 +254,13 @@#define CLK_SCLK_SPI0 245#define CLK_SCLK_UART1 246#define CLK_SCLK_UART0 247 +#define CLK_SCLK_UART2 248 +#define CLK_SCLK_UART3 249/* * Total number of clocks of main CMU. * NOTE: Must be equal to last clock ID increased by one. */ -#define CLK_NR_CLKS 248 +#define CLK_NR_CLKS 250#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
Signature · 1 line
1.7.9.5
Chanwoo Choi
maintainerPATCH 1/2 clk: samsung: exynos3250: add uart2/3 related clocks
Hi Pankaj,
Quoted 10 lines · Pankaj Dubey
Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds missing clock entries for UART2 and UART3.
CC Mike Turquette <[email protected]>CC Sylwester Nawrocki <[email protected]>Signed-off-by Pankaj Dubey <[email protected]>--- drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)
Exynos3250 has only two UART(0,1) port. Exynos3250 don't support UART 2,3.
Thanks,
Chanwoo Choi
Quoted 98 lines
drivers/clk/samsung/clk-exynos3250.c +11
-0@@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[] __initdata = {MUX (CLK_MOUT_MMC0 ,"mout_mmc0" , group_sclk_p,SRC_FSYS ,0 ,3 ),/* SRC_PERIL0 */ +MUX (CLK_MOUT_UART3 ,"mout_uart3" , group_sclk_p,SRC_PERIL0 ,12 ,4 ), +MUX (CLK_MOUT_UART2 ,"mout_uart2" , group_sclk_p,SRC_PERIL0 ,8 ,4 ),MUX (CLK_MOUT_UART1 ,"mout_uart1" , group_sclk_p,SRC_PERIL0 ,4 ,4 ), MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),@@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[] __initdata = {DIV (CLK_DIV_MMC0 ,"div_mmc0" ,"mout_mmc0" ,DIV_FSYS1 ,0 ,4 ),/* DIV_PERIL0 */ +DIV (CLK_DIV_UART3 ,"div_uart3" ,"mout_uart3" ,DIV_PERIL0 ,12 ,4 ), +DIV (CLK_DIV_UART2 ,"div_uart2" ,"mout_uart2" ,DIV_PERIL0 ,8 ,4 ),DIV (CLK_DIV_UART1 ,"div_uart1" ,"mout_uart1" ,DIV_PERIL0 ,4 ,4 ), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),@@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[] __initdata = { GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),GATE (CLK_SCLK_SPI0 ,"sclk_spi0" ,"div_spi0_pre" ,GATE_SCLK_PERIL ,6 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART3 ,"sclk_uart3" ,"div_uart3" , +GATE_SCLK_PERIL ,3 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART2 ,"sclk_uart2" ,"div_uart2" , +GATE_SCLK_PERIL ,2 ,CLK_SET_RATE_PARENT ,0 ),GATE (CLK_SCLK_UART1 ,"sclk_uart1" ,"div_uart1" ,GATE_SCLK_PERIL ,1 ,CLK_SET_RATE_PARENT ,0 ), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",@@ -679,6 +687,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {GATE (CLK_USBOTG ,"usbotg" ,"div_aclk_200" ,GATE_IP_FSYS ,13 ,0 ,0 ),GATE (CLK_USBHOST ,"usbhost" ,"div_aclk_200" ,GATE_IP_FSYS ,12 ,0 ,0 ),GATE (CLK_SROMC ,"sromc" ,"div_aclk_200" ,GATE_IP_FSYS ,11 ,0 ,0 ), +GATE (CLK_SDMMC2 ,"sdmmc2" ,"div_aclk_200" ,GATE_IP_FSYS ,7 ,0 ,0 ),GATE (CLK_SDMMC1 ,"sdmmc1" ,"div_aclk_200" ,GATE_IP_FSYS ,6 ,0 ,0 ),GATE (CLK_SDMMC0 ,"sdmmc0" ,"div_aclk_200" ,GATE_IP_FSYS ,5 ,0 ,0 ), GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),@@ -698,6 +707,8 @@ static struct samsung_gate_clock gate_clks[] __initdata = {GATE (CLK_I2C2 ,"i2c2" ,"div_aclk_100" ,GATE_IP_PERIL ,8 ,0 ,0 ),GATE (CLK_I2C1 ,"i2c1" ,"div_aclk_100" ,GATE_IP_PERIL ,7 ,0 ,0 ),GATE (CLK_I2C0 ,"i2c0" ,"div_aclk_100" ,GATE_IP_PERIL ,6 ,0 ,0 ), +GATE (CLK_UART3 ,"uart3" ,"div_aclk_100" ,GATE_IP_PERIL ,3 ,0 ,0 ), +GATE (CLK_UART2 ,"uart2" ,"div_aclk_100" ,GATE_IP_PERIL ,2 ,0 ,0 ),GATE (CLK_UART1 ,"uart1" ,"div_aclk_100" ,GATE_IP_PERIL ,1 ,0 ,0 ), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0), };include/dt-bindings/clock/exynos3250.h +9
-1@@ -78,6 +78,8 @@#define CLK_MOUT_CORE 58#define CLK_MOUT_APLL 59#define CLK_MOUT_ACLK_266_SUB 60 +#define CLK_MOUT_UART2 61 +#define CLK_MOUT_UART3 62/* Dividers */ #define CLK_DIV_GPL 64@@ -126,6 +128,8 @@#define CLK_DIV_CORE 107#define CLK_DIV_HPM 108#define CLK_DIV_COPY 109 +#define CLK_DIV_UART2 110 +#define CLK_DIV_UART3 111/* Gates */ #define CLK_ASYNC_G3D 128@@ -222,6 +226,8 @@#define CLK_BLOCK_MFC 219#define CLK_BLOCK_CAM 220#define CLK_SMIES 221 +#define CLK_UART2 222 +#define CLK_UART3 223/* Special clocks */ #define CLK_SCLK_JPEG 224@@ -248,11 +254,13 @@#define CLK_SCLK_SPI0 245#define CLK_SCLK_UART1 246#define CLK_SCLK_UART0 247 +#define CLK_SCLK_UART2 248 +#define CLK_SCLK_UART3 249/* * Total number of clocks of main CMU. * NOTE: Must be equal to last clock ID increased by one. */ -#define CLK_NR_CLKS 248 +#define CLK_NR_CLKS 250#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
PATCH 1/2 clk: samsung: exynos3250: add uart2/3 related clocks
Hi Chanwoo,
On Monday, September 29, 2014 7:42 AM, Chanwoo Choi wrote,
Quoted 2 lines
To: Pankaj Dubey
Cc: linux-arm-kernel at lists.infradead.org;
linux-samsung-soc at vger.kernel.org;
Quoted 4 lines
kgene.kim at samsung.com; tomasz.figa at gmail.com; robh+dt at kernel.org; linux at arm.linux.org.uk; naushad at samsung.com; Mike Turquette; Sylwester Nawrocki
Subject: Re: [PATCH 1/2] clk: samsung: exynos3250: add uart2/3 related
clocks
Quoted 15 lines
Hi Pankaj,
Quoted 10 lines · Pankaj Dubey
Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds missing clock entries for UART2 and UART3.
CC Mike Turquette <[email protected]>CC Sylwester Nawrocki <[email protected]>Signed-off-by Pankaj Dubey <[email protected]>--- drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)
Quoted 2 lines
Exynos3250 has only two
UART(0,1)port. Exynos3250 don't support UART 2,3.
As per Exynos3250 user manual that I have with me it supports UART(0,1,2,3). It has been mentioned
in UART Chapter as well as CMU IP details also mentioned about the clock entries. We have tested it
also on Espresso3250 board which is based on Exynos3250 SoC.
Thanks,
Pankaj Dubey
Quoted 10 lines
Thanks,
Chanwoo Choidrivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[]
Quoted 7 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[]
__initdata =
Quoted 6 lines
{
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] __initdata = {
Quoted 4 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0MUX (CLK_MOUT_MMC0 ,"mout_mmc0" , group_sclk_p,SRC_FSYS ,0 ,3 ),/* SRC_PERIL0 */ + MUX(CLK_MOUT_UART3, "mout_uart3", group_sclk_p, SRC_PERIL0,12, 4),
Quoted 8 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 361
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +1
-0+ MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8,4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 362
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4,4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 363
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0,4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_div_clock div_clks[]
Quoted 2 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[]
__initdata = {
Quoted 9 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[]
Quoted 9 lines
drivers/clk/samsung/clk-exynos3250.c +2
-0DIV (CLK_DIV_MMC0 ,"div_mmc0" ,"mout_mmc0" ,DIV_FSYS1 ,0 ,4 ),/* DIV_PERIL0 */ +DIV (CLK_DIV_UART3 ,"div_uart3" ,"mout_uart3" ,DIV_PERIL0 ,12 ,4 ), +DIV (CLK_DIV_UART2 ,"div_uart2" ,"mout_uart2" ,DIV_PERIL0 ,8 ,4 ),DIV (CLK_DIV_UART1 ,"div_uart1" ,"mout_uart1" ,DIV_PERIL0 ,4 ,4 ), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),@@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[]
__initdata
Quoted 20 lines
= {
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[] __initdata = {
Quoted 10 lines
drivers/clk/samsung/clk-exynos3250.c +4
-0GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),GATE (CLK_SCLK_SPI0 ,"sclk_spi0" ,"div_spi0_pre" ,GATE_SCLK_PERIL ,6 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART3 ,"sclk_uart3" ,"div_uart3" , +GATE_SCLK_PERIL ,3 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART2 ,"sclk_uart2" ,"div_uart2" , +GATE_SCLK_PERIL ,2 ,CLK_SET_RATE_PARENT ,0 ),GATE (CLK_SCLK_UART1 ,"sclk_uart1" ,"div_uart1" ,GATE_SCLK_PERIL ,1 ,CLK_SET_RATE_PARENT ,0 ), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", @@ -679,6 +687,7@@
Quoted 2 lines
static struct
samsung_gate_clockgate_clks[]__initdata= {
GATE(CLK_USBOTG, "usbotg", "div_aclk_200",GATE_IP_FSYS, 13, 0,0),
Quoted 1 line
GATE(CLK_USBHOST, "usbhost", "
div_aclk_200",GATE_IP_FSYS, 12,0, 0),
drivers/clk/samsung/clk-exynos3250.c
Quoted 2 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0GATE (CLK_SROMC ,"sromc" ,"div_aclk_200" ,GATE_IP_FSYS ,11 ,0 ,0 ), + GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200", GATE_IP_FSYS, 7, 0,0),
Quoted 7 lines
Quoted 1 line
GATE(CLK_SDMMC1, "sdmmc1", "
div_aclk_200",GATE_IP_FSYS, 6, 0,0),
Quoted 1 line
GATE(CLK_SDMMC0, "sdmmc0", "
div_aclk_200",GATE_IP_FSYS, 5, 0,0),
Quoted 1 line
GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),@@
Quoted 1 line
-698,6 +707,8 @@ static struct
samsung_gate_clockgate_clks[]__initdata
= {
Quoted 56 lines
Quoted 44 lines
drivers/clk/samsung/clk-exynos3250.c +2
-0GATE (CLK_I2C2 ,"i2c2" ,"div_aclk_100" ,GATE_IP_PERIL ,8 ,0 ,0 ),GATE (CLK_I2C1 ,"i2c1" ,"div_aclk_100" ,GATE_IP_PERIL ,7 ,0 ,0 ),GATE (CLK_I2C0 ,"i2c0" ,"div_aclk_100" ,GATE_IP_PERIL ,6 ,0 ,0 ), +GATE (CLK_UART3 ,"uart3" ,"div_aclk_100" ,GATE_IP_PERIL ,3 ,0 ,0 ), +GATE (CLK_UART2 ,"uart2" ,"div_aclk_100" ,GATE_IP_PERIL ,2 ,0 ,0 ),GATE (CLK_UART1 ,"uart1" ,"div_aclk_100" ,GATE_IP_PERIL ,1 ,0 ,0 ), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),}; diff --git
a/include/dt-bindings/clock/exynos3250.hb/include/dt-bindings/clock/exynos3250.hindex b535e9d..ffeb695 100644include/dt-bindings/clock/exynos3250.h +7
-0@@ -78,6 +78,8 @@#define CLK_MOUT_CORE 58#define CLK_MOUT_APLL 59#define CLK_MOUT_ACLK_266_SUB 60 +#define CLK_MOUT_UART2 61 +#define CLK_MOUT_UART3 62/* Dividers */ #define CLK_DIV_GPL 64@@ -126,6 +128,8 @@#define CLK_DIV_CORE 107#define CLK_DIV_HPM 108#define CLK_DIV_COPY 109 +#define CLK_DIV_UART2 110 +#define CLK_DIV_UART3 111/* Gates */ #define CLK_ASYNC_G3D 128@@ -222,6 +226,8 @@#define CLK_BLOCK_MFC 219#define CLK_BLOCK_CAM 220#define CLK_SMIES 221 +#define CLK_UART2 222 +#define CLK_UART3 223/* Special clocks */ #define CLK_SCLK_JPEG 224@@ -248,11 +254,13 @@#define CLK_SCLK_SPI0 245#define CLK_SCLK_UART1 246#define CLK_SCLK_UART0 247 +#define CLK_SCLK_UART2 248include/dt-bindings/clock/exynos3250.h line 266
Quoted 10 lines
include/dt-bindings/clock/exynos3250.h +2
-1+#define CLK_SCLK_UART3 249/* * Total number of clocks of main CMU. * NOTE: Must be equal to last clock ID increased by one. */ -#define CLK_NR_CLKS 248 +#define CLK_NR_CLKS 250#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
Quoted 1 line
PATCH 1/2 clk: samsung: exynos3250: add uart2/3 related clocks
Quoted 26 lines · Pankaj Dubey
Hi Chanwoo,
On Monday, September 29, 2014 7:42 AM, Chanwoo Choi wrote,
Quoted 2 lines
To: Pankaj Dubey
Cc: linux-arm-kernel at lists.infradead.org;linux-samsung-soc at vger.kernel.org;
Quoted 4 lines
kgene.kim at samsung.com; tomasz.figa at gmail.com; robh+dt at kernel.org; linux at arm.linux.org.uk; naushad at samsung.com; Mike Turquette; Sylwester Nawrocki
Subject: Re: [PATCH 1/2] clk: samsung: exynos3250: add uart2/3 relatedclocks
Quoted 15 lines
Hi Pankaj,
Quoted 10 lines · Pankaj Dubey
Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds missing clock entries for UART2 and UART3.
CC Mike Turquette <[email protected]>CC Sylwester Nawrocki <[email protected]>Signed-off-by Pankaj Dubey <[email protected]>--- drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)
Quoted 5 lines
Quoted 2 lines
Exynos3250 has only two
UART(0,1)port. Exynos3250 don't support UART 2,3.As per Exynos3250 user manual that I have with me it supports
UART(0,1,2,3). It has been mentioned
which UM do you use? There are two UARTs at rev0.01
Quoted 3 lines
in UART Chapter as well as CMU IP details also mentioned about the clock entries. We have tested it
also on Espresso3250 board which is based on Exynos3250 SoC.
I can't find it at my UM.
Kyungmin Park
Quoted 130 lines
Thanks,
Pankaj DubeyQuoted 10 lines
Thanks,
Chanwoo Choidrivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[]
Quoted 7 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[]
__initdata=Quoted 6 lines
{
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] __initdata = {
Quoted 4 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0MUX (CLK_MOUT_MMC0 ,"mout_mmc0" , group_sclk_p,SRC_FSYS ,0 ,3 ),/* SRC_PERIL0 */ + MUX(CLK_MOUT_UART3, "mout_uart3", group_sclk_p, SRC_PERIL0,12, 4),
Quoted 8 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 361
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +1
-0+ MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8,4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 362
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4,4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 363
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0,4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_div_clock div_clks[]
Quoted 2 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[]
__initdata= {Quoted 9 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[]
Quoted 9 lines
drivers/clk/samsung/clk-exynos3250.c +2
-0DIV (CLK_DIV_MMC0 ,"div_mmc0" ,"mout_mmc0" ,DIV_FSYS1 ,0 ,4 ),/* DIV_PERIL0 */ +DIV (CLK_DIV_UART3 ,"div_uart3" ,"mout_uart3" ,DIV_PERIL0 ,12 ,4 ), +DIV (CLK_DIV_UART2 ,"div_uart2" ,"mout_uart2" ,DIV_PERIL0 ,8 ,4 ),DIV (CLK_DIV_UART1 ,"div_uart1" ,"mout_uart1" ,DIV_PERIL0 ,4 ,4 ), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),@@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[]
__initdataQuoted 19 lines
= {
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[] __initdata = {
Quoted 10 lines
drivers/clk/samsung/clk-exynos3250.c +4
-0GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),GATE (CLK_SCLK_SPI0 ,"sclk_spi0" ,"div_spi0_pre" ,GATE_SCLK_PERIL ,6 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART3 ,"sclk_uart3" ,"div_uart3" , +GATE_SCLK_PERIL ,3 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART2 ,"sclk_uart2" ,"div_uart2" , +GATE_SCLK_PERIL ,2 ,CLK_SET_RATE_PARENT ,0 ),GATE (CLK_SCLK_UART1 ,"sclk_uart1" ,"div_uart1" ,GATE_SCLK_PERIL ,1 ,CLK_SET_RATE_PARENT ,0 ), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", @@ -679,6 +687,7@@
Quoted 2 lines
static struct samsung_gate_clock gate_clks[] __initdata = { GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0,0),
Quoted 1 line
GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12,0, 0),
Quoted 2 lines
GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),+ GATE(CLK_SDMMC2, "sdmmc2", "
div_aclk_200",GATE_IP_FSYS, 7, 0,Quoted 8 lines
0),
Quoted 1 line
GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0,0),
Quoted 1 line
GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0,0),
Quoted 1 line
GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),@@
Quoted 1 line
-698,6 +707,8 @@ static struct
samsung_gate_clockgate_clks[]__initdata= {
Quoted 53 lines
Quoted 53 lines
GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0), GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0), GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),drivers/clk/samsung/clk-exynos3250.c +2
-0+GATE (CLK_UART3 ,"uart3" ,"div_aclk_100" ,GATE_IP_PERIL ,3 ,0 ,0 ), +GATE (CLK_UART2 ,"uart2" ,"div_aclk_100" ,GATE_IP_PERIL ,2 ,0 ,0 ),GATE (CLK_UART1 ,"uart1" ,"div_aclk_100" ,GATE_IP_PERIL ,1 ,0 ,0 ), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),}; diff --git
a/include/dt-bindings/clock/exynos3250.hb/include/dt-bindings/clock/exynos3250.hindex b535e9d..ffeb695 100644include/dt-bindings/clock/exynos3250.h +9
-1@@ -78,6 +78,8 @@#define CLK_MOUT_CORE 58#define CLK_MOUT_APLL 59#define CLK_MOUT_ACLK_266_SUB 60 +#define CLK_MOUT_UART2 61 +#define CLK_MOUT_UART3 62/* Dividers */ #define CLK_DIV_GPL 64@@ -126,6 +128,8 @@#define CLK_DIV_CORE 107#define CLK_DIV_HPM 108#define CLK_DIV_COPY 109 +#define CLK_DIV_UART2 110 +#define CLK_DIV_UART3 111/* Gates */ #define CLK_ASYNC_G3D 128@@ -222,6 +226,8 @@#define CLK_BLOCK_MFC 219#define CLK_BLOCK_CAM 220#define CLK_SMIES 221 +#define CLK_UART2 222 +#define CLK_UART3 223/* Special clocks */ #define CLK_SCLK_JPEG 224@@ -248,11 +254,13 @@#define CLK_SCLK_SPI0 245#define CLK_SCLK_UART1 246#define CLK_SCLK_UART0 247 +#define CLK_SCLK_UART2 248 +#define CLK_SCLK_UART3 249/* * Total number of clocks of main CMU. * NOTE: Must be equal to last clock ID increased by one. */ -#define CLK_NR_CLKS 248 +#define CLK_NR_CLKS 250Quoted 3 lines
include/dt-bindings/clock/exynos3250.h line 266
Quoted 1 line
include/dt-bindings/clock/exynos3250.h +0
-0#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
Quoted 1 line
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 1/2 clk: samsung: exynos3250: add uart2/3 related clocks
Hi,
On Monday, September 29, 2014 9:07 AM, Kyungmin Park wrote,
Quoted 2 lines
To: Pankaj Dubey
Cc: Chanwoo Choi; Kukjin Kim; Russell King - ARM Linux;
naushad at samsung.com;
Quoted 1 line
Tomasz Figa; linux-samsung-soc; robh+dt at kernel.org; Sylwester Nawrocki;
Mike
Quoted 2 lines
Turquette; arm-linux
Subject: Re: [PATCH 1/2] clk: samsung: exynos3250: add uart2/3 related
clocks
Quoted 30 lines
Quoted 27 lines · Pankaj Dubey
Hi Chanwoo,
On Monday, September 29, 2014 7:42 AM, Chanwoo Choi wrote,
Quoted 2 lines
To: Pankaj Dubey
Cc: linux-arm-kernel at lists.infradead.org;linux-samsung-soc at vger.kernel.org;
Quoted 5 lines
kgene.kim at samsung.com; tomasz.figa at gmail.com; robh+dt at kernel.org; linux at arm.linux.org.uk; naushad at samsung.com; Mike Turquette; Sylwester Nawrocki
Subject: Re: [PATCH 1/2] clk: samsung: exynos3250: add uart2/3 relatedclocks
Quoted 15 lines
Hi Pankaj,
Quoted 10 lines · Pankaj Dubey
Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds missing clock entries for UART2 and UART3.
CC Mike Turquette <[email protected]>CC Sylwester Nawrocki <[email protected]>Signed-off-by Pankaj Dubey <[email protected]>--- drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Exynos3250 has only two
UART(0,1)port. Exynos3250 don't support UART2,3.
Quoted 3 lines
Quoted 1 line
As per Exynos3250 user manual that I have with me it supports
UART(0,1,2,3).
Quoted 3 lines
Quoted 1 line
It has been mentioned
which UM do you use? There are two UARTs at rev0.01
I am using Rev 2.0.
Thanks,
Pankaj Dubey
Quoted 154 lines
Quoted 3 lines
in UART Chapter as well as CMU IP details also mentioned about the clock entries. We have tested it also on Espresso3250 board which is based on Exynos3250 SoC.
I can't find it at my UM.
Kyungmin Park
Quoted 8 lines
Thanks,
Pankaj DubeyQuoted 4 lines
Thanks,
Chanwoo ChoiQuoted 1 line
Quoted 9 lines
Quoted 6 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[]
Quoted 6 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[]
__initdata=Quoted 2 lines
{
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0,3),
Quoted 5 lines
Quoted 5 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 359
Quoted 3 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0/* SRC_PERIL0 */ + MUX(CLK_MOUT_UART3, "mout_uart3", group_sclk_p, SRC_PERIL0,12, 4),
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +1
-0+ MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0,8,
Quoted 2 lines
Quoted 2 lines
4),
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0,4,
Quoted 2 lines
Quoted 2 lines
4),
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0,0,
Quoted 8 lines
Quoted 3 lines
4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_div_clock div_clks[]
Quoted 2 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[]
__initdata= {Quoted 4 lines
Quoted 4 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0DIV (CLK_DIV_MMC0 ,"div_mmc0" ,"mout_mmc0" ,DIV_FSYS1 ,0 ,4 ),/* DIV_PERIL0 */ + DIV(CLK_DIV_UART3, "div_uart3", "mout_uart3", DIV_PERIL0, 12,4),
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
drivers/clk/samsung/clk-exynos3250.c +2
-0+DIV (CLK_DIV_UART2 ,"div_uart2" ,"mout_uart2" ,DIV_PERIL0 ,8 , +4 ),DIV (CLK_DIV_UART1 ,"div_uart1" ,"mout_uart1" ,DIV_PERIL0 ,4 ,4 ), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0,4),
Quoted 17 lines
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[]
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[]
__initdataQuoted 15 lines
= {
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[] __initdata = {
Quoted 11 lines
drivers/clk/samsung/clk-exynos3250.c +5
-0GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),GATE (CLK_SCLK_SPI0 ,"sclk_spi0" ,"div_spi0_pre" ,GATE_SCLK_PERIL ,6 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART3 ,"sclk_uart3" ,"div_uart3" , +GATE_SCLK_PERIL ,3 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART2 ,"sclk_uart2" ,"div_uart2" , +GATE_SCLK_PERIL ,2 ,CLK_SET_RATE_PARENT ,0 ),GATE (CLK_SCLK_UART1 ,"sclk_uart1" ,"div_uart1" ,GATE_SCLK_PERIL ,1 ,CLK_SET_RATE_PARENT ,0 ), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", @@ -679,6 +687,7@@
Quoted 2 lines
static struct samsung_gate_clock gate_clks[] __initdata = { GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13,0,
Quoted 6 lines
Quoted 6 lines
0),
Quoted 1 line
GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12,0, 0),
Quoted 3 lines
GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0,0),
+ GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200",GATE_IP_FSYS, 7,0,
Quoted 2 lines
Quoted 2 lines
0),
Quoted 1 line
GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6,0,
Quoted 2 lines
Quoted 2 lines
0),
Quoted 1 line
GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5,0,
Quoted 11 lines
Quoted 6 lines
0),
Quoted 2 lines
GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0,0),
@@
Quoted 2 lines
-698,6 +707,8 @@ static struct
samsung_gate_clockgate_clks[]__initdata= {
Quoted 4 lines
Quoted 4 lines
GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0), GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0), GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),+ GATE(CLK_UART3, "uart3", "
div_aclk_100",GATE_IP_PERIL, 3, 0,0),
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
+ GATE(CLK_UART2, "uart2", "
div_aclk_100",GATE_IP_PERIL, 2, 0,
+ 0),GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0,0), }; diff --git
a/include/dt-bindings/clock/exynos3250.hb/include/dt-bindings/clock/exynos3250.h
index b535e9d..ffeb695 100644include/dt-bindings/clock/exynos3250.h +8
-0@@ -78,6 +78,8 @@#define CLK_MOUT_CORE 58#define CLK_MOUT_APLL 59#define CLK_MOUT_ACLK_266_SUB 60 +#define CLK_MOUT_UART2 61 +#define CLK_MOUT_UART3 62/* Dividers */ #define CLK_DIV_GPL 64@@ -126,6 +128,8 @@#define CLK_DIV_CORE 107#define CLK_DIV_HPM 108#define CLK_DIV_COPY 109 +#define CLK_DIV_UART2 110 +#define CLK_DIV_UART3 111/* Gates */ #define CLK_ASYNC_G3D 128@@ -222,6 +226,8 @@#define CLK_BLOCK_MFC 219#define CLK_BLOCK_CAM 220#define CLK_SMIES 221 +#define CLK_UART2 222 +#define CLK_UART3 223/* Special clocks */ #define CLK_SCLK_JPEG 224@@ -248,11 +254,13 @@#define CLK_SCLK_SPI0 245#define CLK_SCLK_UART1 246#define CLK_SCLK_UART0 247 +#define CLK_SCLK_UART2 248 +#define CLK_SCLK_UART3 249Quoted 8 lines
Quoted 8 lines
include/dt-bindings/clock/exynos3250.h
Quoted 8 lines
include/dt-bindings/clock/exynos3250.h +1
-1/* * Total number of clocks of main CMU. * NOTE: Must be equal to last clock ID increased by one. */ -#define CLK_NR_CLKS 248 +#define CLK_NR_CLKS 250#endif /*
_DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_HQuoted 8 lines
Quoted 2 lines
*/
Quoted 1 line
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 1/2 clk: samsung: exynos3250: add uart2/3 related clocks
Quoted 45 lines · Pankaj Dubey
Hi,
On Monday, September 29, 2014 9:07 AM, Kyungmin Park wrote,
Quoted 2 lines
To: Pankaj Dubey
Cc: Chanwoo Choi; Kukjin Kim; Russell King - ARM Linux;naushad at samsung.com;
Quoted 1 line
Tomasz Figa; linux-samsung-soc; robh+dt at kernel.org; Sylwester Nawrocki;
Mike
Quoted 2 lines
Turquette; arm-linux
Subject: Re: [PATCH 1/2] clk: samsung: exynos3250: add uart2/3 relatedclocks
Quoted 34 lines
Quoted 5 lines · Pankaj Dubey
Hi Chanwoo,
On Monday, September 29, 2014 7:42 AM, Chanwoo Choi wrote,
Quoted 2 lines
To: Pankaj Dubey
Cc: linux-arm-kernel at lists.infradead.org;Quoted 23 lines
linux-samsung-soc at vger.kernel.org;
Quoted 5 lines
kgene.kim at samsung.com; tomasz.figa at gmail.com; robh+dt at kernel.org; linux at arm.linux.org.uk; naushad at samsung.com; Mike Turquette; Sylwester Nawrocki
Subject: Re: [PATCH 1/2] clk: samsung: exynos3250: add uart2/3 relatedclocks
Quoted 16 lines
Hi Pankaj,
Quoted 10 lines · Pankaj Dubey
Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds missing clock entries for UART2 and UART3.
CC Mike Turquette <[email protected]>CC Sylwester Nawrocki <[email protected]>Signed-off-by Pankaj Dubey <[email protected]>--- drivers/clk/samsung/clk-exynos3250.c | 11 +++++++++++ include/dt-bindings/clock/exynos3250.h | 10 +++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)Exynos3250 has only two
UART(0,1)port. Exynos3250 don't support UART2,3.
Quoted 2 lines
Quoted 1 line
Quoted 7 lines
Quoted 1 line
Quoted 1 line
As per Exynos3250 user manual that I have with me it supports
UART(0,1,2,3).Quoted 3 lines
Quoted 1 line
It has been mentioned
which UM do you use? There are two UARTs at rev0.01
I am using Rev 2.0.
I received the latest manual from LSI. but it's still v1.40.
Quoted 160 lines
Thanks,
Pankaj DubeyQuoted 154 lines
Quoted 3 lines
in UART Chapter as well as CMU IP details also mentioned about the clock entries. We have tested it also on Espresso3250 board which is based on Exynos3250 SoC.
I can't find it at my UM.
Kyungmin Park
Quoted 8 lines
Thanks,
Pankaj DubeyQuoted 4 lines
Thanks,
Chanwoo ChoiQuoted 1 line
Quoted 9 lines
Quoted 6 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[]
Quoted 6 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[]
__initdata=Quoted 2 lines
{
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0,3),
Quoted 5 lines
Quoted 5 lines
drivers/clk/samsung/clk-exynos3250.c static struct samsung_mux_clock mux_clks[] · line 359
Quoted 3 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0/* SRC_PERIL0 */ + MUX(CLK_MOUT_UART3, "mout_uart3", group_sclk_p, SRC_PERIL0,12, 4),
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +1
-0+ MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0,8,
Quoted 2 lines
Quoted 2 lines
4),
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0,4,
Quoted 2 lines
Quoted 2 lines
4),
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0,0,
Quoted 8 lines
Quoted 3 lines
4),
drivers/clk/samsung/clk-exynos3250.c static struct samsung_div_clock div_clks[]
Quoted 2 lines
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[]
__initdata= {Quoted 4 lines
Quoted 4 lines
drivers/clk/samsung/clk-exynos3250.c +1
-0DIV (CLK_DIV_MMC0 ,"div_mmc0" ,"mout_mmc0" ,DIV_FSYS1 ,0 ,4 ),/* DIV_PERIL0 */ + DIV(CLK_DIV_UART3, "div_uart3", "mout_uart3", DIV_PERIL0, 12,4),
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
drivers/clk/samsung/clk-exynos3250.c +2
-0+DIV (CLK_DIV_UART2 ,"div_uart2" ,"mout_uart2" ,DIV_PERIL0 ,8 , +4 ),DIV (CLK_DIV_UART1 ,"div_uart1" ,"mout_uart1" ,DIV_PERIL0 ,4 ,4 ), DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0,4),
Quoted 17 lines
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[]
Quoted 1 line
drivers/clk/samsung/clk-exynos3250.c +0
-0@@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[]
__initdataQuoted 15 lines
= {
drivers/clk/samsung/clk-exynos3250.c static struct samsung_gate_clock gate_clks[] __initdata = {
Quoted 11 lines
drivers/clk/samsung/clk-exynos3250.c +5
-0GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),GATE (CLK_SCLK_SPI0 ,"sclk_spi0" ,"div_spi0_pre" ,GATE_SCLK_PERIL ,6 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART3 ,"sclk_uart3" ,"div_uart3" , +GATE_SCLK_PERIL ,3 ,CLK_SET_RATE_PARENT ,0 ), +GATE (CLK_SCLK_UART2 ,"sclk_uart2" ,"div_uart2" , +GATE_SCLK_PERIL ,2 ,CLK_SET_RATE_PARENT ,0 ),GATE (CLK_SCLK_UART1 ,"sclk_uart1" ,"div_uart1" ,GATE_SCLK_PERIL ,1 ,CLK_SET_RATE_PARENT ,0 ), GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", @@ -679,6 +687,7@@
Quoted 2 lines
static struct samsung_gate_clock gate_clks[] __initdata = { GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13,0,
Quoted 6 lines
Quoted 6 lines
0),
Quoted 1 line
GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12,0, 0),
Quoted 3 lines
GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0,0),
+ GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200",GATE_IP_FSYS, 7,0,
Quoted 2 lines
Quoted 2 lines
0),
Quoted 1 line
GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6,0,
Quoted 2 lines
Quoted 2 lines
0),
Quoted 1 line
GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5,0,
Quoted 11 lines
Quoted 6 lines
0),
Quoted 2 lines
GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0,0),
@@
Quoted 2 lines
-698,6 +707,8 @@ static struct
samsung_gate_clockgate_clks[]__initdata= {
Quoted 4 lines
Quoted 4 lines
GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0), GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0), GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),+ GATE(CLK_UART3, "uart3", "
div_aclk_100",GATE_IP_PERIL, 3, 0,0),
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
+ GATE(CLK_UART2, "uart2", "
div_aclk_100",GATE_IP_PERIL, 2, 0,
+ 0),GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0), GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0,0), }; diff --git
a/include/dt-bindings/clock/exynos3250.hb/include/dt-bindings/clock/exynos3250.h
index b535e9d..ffeb695 100644include/dt-bindings/clock/exynos3250.h +8
-0@@ -78,6 +78,8 @@#define CLK_MOUT_CORE 58#define CLK_MOUT_APLL 59#define CLK_MOUT_ACLK_266_SUB 60 +#define CLK_MOUT_UART2 61 +#define CLK_MOUT_UART3 62/* Dividers */ #define CLK_DIV_GPL 64@@ -126,6 +128,8 @@#define CLK_DIV_CORE 107#define CLK_DIV_HPM 108#define CLK_DIV_COPY 109 +#define CLK_DIV_UART2 110 +#define CLK_DIV_UART3 111/* Gates */ #define CLK_ASYNC_G3D 128@@ -222,6 +226,8 @@#define CLK_BLOCK_MFC 219#define CLK_BLOCK_CAM 220#define CLK_SMIES 221 +#define CLK_UART2 222 +#define CLK_UART3 223/* Special clocks */ #define CLK_SCLK_JPEG 224@@ -248,11 +254,13 @@#define CLK_SCLK_SPI0 245#define CLK_SCLK_UART1 246#define CLK_SCLK_UART0 247 +#define CLK_SCLK_UART2 248 +#define CLK_SCLK_UART3 249Quoted 8 lines
Quoted 8 lines
include/dt-bindings/clock/exynos3250.h
Quoted 8 lines
include/dt-bindings/clock/exynos3250.h +1
-1/* * Total number of clocks of main CMU. * NOTE: Must be equal to last clock ID increased by one. */ -#define CLK_NR_CLKS 248 +#define CLK_NR_CLKS 250#endif /*
_DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_HQuoted 8 lines
Quoted 2 lines
*/
Quoted 1 line
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/2 arm: dts: exynos3250: add device node support for serial2 and serial3
In reply to Pankaj Dubey--- arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 21 +++++++++++++++++++++ arch/arm/boot/dts/exynos3250.dtsi | 24 ++++++++++++++++++++++++ 2 files changed, 45 insertions(+)
arch/arm/boot/dts/exynos3250-pinctrl.dtsi +21 -0
@@ -97,6 +97,27 @@ samsung,pin-drv = <0>; }; + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>;
arch/arm/boot/dts/exynos3250.dtsi +24 -0
@@ -41,6 +41,8 @@ i2c7 = &i2c_7; serial0 = &serial_0; serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; }; cpus {
@@ -346,6 +348,28 @@ status = "disabled"; }; + serial_2: serial at 13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 111 0>; + clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data &uart2_fctl>; + status = "disabled"; + }; + + serial_3: serial at 13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 112 0>; + clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + status = "disabled"; + }; + i2c_0: i2c at 13860000 { #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
1.7.9.5