Skip to contentSkip to conversation

system hangs on wake_up call from IRQ handler

DISCUSSION Maarten Ghijsen 1 participant 1 message Mar 18, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I am busy on writing a driver for a PCI Card. Amongst others my driver includes an IOCTL command for starting a DMA transfer (user-->PCI card or PCI card-->user). In my handler for this command I instruct the PciCard to start a DMA transfer and than wait (sleep) for the DMA to complete. I wait using the wait_event function, which waits for an event that is 'fired' (wake_up) from the DMA done interrupt handler. As soon as I make the call to wake_up, from the DMA done interrupt handler, my system hangs completely.

Does anyone have any idea why the system hangs on the wake-up from the interrupt handler?

Below you will find some pseudo code for with the wait_event and the wake_up:

// wait from DMA IOCTL handler
void Dta1xxTxIoCtlDma()

{
	startdma();

	wait_event(my_wait_queue, ( 1==dma_done_flag) );

	return;
}

// wake_up from interrupt handler
void Dta1xxIRQ()

{
	if ( IsDmaDoneInterruptSet() ) {
		dma_done_flag = 1;
		wake_up(&my_wait_queue);
	}
}

I am using linux kernel version 2.4.18.

Regards,

Maarten