Skip to contentSkip to conversation

Maximum (efficient) partition sizes for various filesystem types...

DISCUSSION Joel Beach 5 participants 6 messages Nov 19, 2001 – Nov 23, 2001

lore
Share & tools
lore

Joel Beach

author
#0 lore raw

Hi everyone,

Have just put a new 30GB hard drive for my server at home, and am wondering what the optimal sizes for partitioning are.

For instance, the Debian guide says that, due to Ext2 efficiency, partitions greater than 6-7GB shouldn't be created. Is this true for Ext3/ReiserFS.

Am also not sure which file systems to choose. I'm planning on having a 3GB parition for the actual system, and formatting this using ReiserFS (generally smaller files). However, is Reiser also a good choice for download archives (where average file size is about 5-10MB) still a good choice?

Joel

#1 lore raw
Quoted 2 lines

For instance, the Debian guide says that, due to Ext2 efficiency, partitions greater than 6-7GB shouldn't be created. Is this true for Ext3/ReiserFS.

I've run several 45-200Gb ext2 and ext3 partitions with no problem. I'm not sure what the origin of the Debian guide comemnt is but I've never heard it from an ext2 developer

Obviously pick a journalled fs for big partitions 8)

author
#2 lore raw

I think I'll fix up that bit in the Debian manual myself then if they let me....

For what it's worth, here's the paragraph from the "Woody" installation manual:

"For new users, personal Debian boxes, home systems, and other single-user setups, a single / partition (plus swap) is probably the easiest, simplest way to go. It is possible to have problems with this idea, though, with larger (20GB) disks. Based on limitations in how ext2 works, avoid any single partition greater than 6GB or so."

Joel

----- Original Message -----
From: "Alan Cox" <[email protected]>
To: "Joel Beach" <[email protected]>
Cc: <[email protected]>
Sent: Monday, November 19, 2001 8:58 PM
Subject: Re: Maximum (efficient) partition sizes for various filesystem types...

Quoted 1 line
Quoted 1 line

For instance, the Debian guide says that, due to Ext2 efficiency,

partitions

Quoted 3 lines
Quoted 1 line

greater than 6-7GB shouldn't be created. Is this true for Ext3/ReiserFS.

I've run several 45-200Gb ext2 and ext3 partitions with no problem. I'm

not

Quoted 4 lines

sure what the origin of the Debian guide comemnt is but I've never heard it from an ext2 developer

Obviously pick a journalled fs for big partitions 8)

#3 lore raw
In reply to Alan Cox
Quoted 12 lines · Joel Beach

I think I'll fix up that bit in the Debian manual myself then if they let me....

For what it's worth, here's the paragraph from the "Woody" installation manual:

"For new users, personal Debian boxes, home systems, and other single-user setups, a single / partition (plus swap) is probably the easiest, simplest way to go. It is possible to have problems with this idea, though, with larger (20GB) disks. Based on limitations in how ext2 works, avoid any single partition greater than 6GB or so."

No. They mean limitations of relatively old IDE hardware...

#4 lore raw
In reply to Joel Beach

Hi,

Quoted 6 lines · Alan Cox
Quoted 2 lines

For instance, the Debian guide says that, due to Ext2 efficiency, partitions greater than 6-7GB shouldn't be created. Is this true for Ext3/ReiserFS.

I've run several 45-200Gb ext2 and ext3 partitions with no problem. I'm not sure what the origin of the Debian guide comemnt is but I've never heard it from an ext2 developer

The largest filesystem I use with ext3 at the moment is 40GB, and it is 98% full and is used *constantly* (it contains my main build trees). I'm not sure where the 6-7GB limit idea comes from but I've got very few filesystems smaller than that, and they are still all ext3.

Cheers,
Stephen

#5 lore raw
In reply to Joel Beach
Quoted 18 lines · Stephen C. Tweedie

Hi,

Quoted 7 lines · Alan Cox
Quoted 3 lines

For instance, the Debian guide says that, due to Ext2 efficiency, partitions greater than 6-7GB shouldn't be created. Is this true for Ext3/ReiserFS.

I've run several 45-200Gb ext2 and ext3 partitions with no problem. I'm not sure what the origin of the Debian guide comemnt is but I've never heard it from an ext2 developer

The largest filesystem I use with ext3 at the moment is 40GB, and it is 98% full and is used *constantly* (it contains my main build trees). I'm not sure where the 6-7GB limit idea comes from but I've got very few filesystems smaller than that, and they are still all ext3.

Quoted 9 lines

Cheers,
Stephen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

I bet the origin is the time it takes to run fsck. If so, run any journaling filesystem and you'll be okay. We have 2 terabyte systems out there, I bet ext3 does also.

hans