Skip to contentSkip to conversation

U-Boot-Users Digest, Vol 9, Issue 41

U-Boot-Users Russell McGuire 1 participant 1 message Feb 15, 2007 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): mailman.40855.1171563974.16820.u-boot-users@lists.sourceforge.net

#1 lore raw

Kim,

I assume this change has no affect on boards that are do not have the BCSR registers on them? i.e. I have a tendancy to use your config files, with a board that I designed after your reference design. The only differenc being we don't have the FPGPA sitting in the middle of the board.

Oridinarily I wouldn't ask this, but I have seen this hardware timeout with my Engineering sample of a Rev 1.2 <half way to Rev 2.0 CPU, since I was having to add new CPU ID's to U-boot 6 months ago>. Is it purely CPU related or something to do with extra buffers that were created via extra hardware?

-Russ

Quoted 43 lines

From: Kim Phillips <[email protected]>
Subject: [U-Boot-Users] [PATCH] mpc83xx: Disable G1TXCLK, G2TXCLK h/w
buffers
To: u-boot-users at lists.sourceforge.net
Message-ID: <[email protected]>
Content-Type: text/plain; charset=US-ASCII

Disable G1TXCLK, G2TXCLK h/w buffers. This patch fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.

Verified does not break MPC8360 MDS Rev. 1.1, Rev. 1.2 boards.

---
 board/mpc8360emds/mpc8360emds.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletions(-)
board/mpc8360emds/mpc8360emds.c +8 -1
index 54b9acc..535884c 100644
@@ -90,11 +90,18 @@ const qe_iop_conf_t qe_iop_conf_tab[] =
 
 int board_early_init_f(void)
 {
-	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+
+	u8 *bcsr = (u8 *)CFG_BCSR;
+	const immap_t *immr = (immap_t *)CFG_IMMR;
 
 	/* Enable flash write */
 	bcsr[0xa] &= ~0x04;
 
+	/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround)
 */
+	if (immr->sysconf.spridr == SPR_8360_REV20 ||
+	    immr->sysconf.spridr == SPR_8360E_REV20)
+		bcsr[0xe] = 0x30;
+
 	return 0;
 }