Skip to contentSkip to conversation

Using gcc after builing

Buildroot Barry Bridges 2 participants 2 messages Jan 14, 2010

lore
Share & tools
lore
#0 lore raw

Hi all,

Sorry in advance for being a bit of a nube here, just finding my feet.

I have make my build for my arm AT91SAM9263ek without a problem. Many thanks to the guys who put all the effort in here to make it so much easier to build these things.

Anyway, i now want to compile my application for the board. Buildroot makes the 'correct' version if cross compiler for the device/platform. Should i be using this for my application.

If so how do i access it\install it.

If not, what should i use and any ideas where is get if from?

Many thanks

Barry

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100114/71628d03/attachment-0001.htm>

#1 lore raw
Quoted 11 lines

-----Original Message-----
From: buildroot-bounces at busybox.net [mailto:buildroot-bounces at busybox.net] On Behalf Of Barry Bridges
Sent: 14 January 2010 11:58
To: buildroot at busybox.net
Subject: [Buildroot] Using gcc after builing

Hi all,

Sorry in advance for being a bit of a nube here, just finding my feet.

Quoted 8 lines

I have make my build for my arm AT91SAM9263ek without a problem. Many thanks to the guys who put all the effort in here to make it so much easier to build these things.

Anyway, i now want to compile my application for the board. Buildroot makes the 'correct' version if cross compiler for the device/platform. Should i be using this for my application.

Yes.

Quoted 1 line

If so how do i access it\install it.

See the Buildroot documentation for either the latest stable release 2009.11 or GIT head http://buildroot.uclibc.org/docs.html .
This has some info on using the toolchain built by Buildroot, e.g.
http://buildroot.uclibc.org/downloads/buildroot.html#using_toolchain .

Quoted 10 lines

If not, what should i use and any ideas where is get if from?

Many thanks

Barry