spi: s3c64xx: add dma maxburst size initialization
Subsystems (3)
PATCH v2 3/4 spi: s3c64xx: add dma maxburst size initialization
This patch adds dma maxburst size initialization.
The maxburst should be set by MODE_CFGn.DMA_TYPE,
because the pl330 dma driver supports burst mode.
--- drivers/spi/spi-s3c64xx.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)
drivers/spi/spi-s3c64xx.c +18 -0
@@ -287,10 +287,20 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,struct s3c64xx_spi_driver_data *sdd;struct samsung_dma_prep info;struct samsung_dma_config config; +void __iomem *regs; +unsigned int mode_cfg;if (dma->direction ==DMA_DEV_TO_MEM ) { sdd =container_of ((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); + + regs = sdd->regs; + mode_cfg =readl (regs +S3C64XX_SPI_MODE_CFG ); +if (mode_cfg &S3C64XX_SPI_MODE_4BURST ) + config.maxburst =4 ; +else + config.maxburst =1 ; + config.direction = sdd->rx_dma.direction; config.fifo = sdd->sfr_start +S3C64XX_SPI_RX_DATA ; config.width = sdd->cur_bpw /8 ;
@@ -298,6 +308,14 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, }else { sdd =container_of ((void *)dma, struct s3c64xx_spi_driver_data, tx_dma); + + regs = sdd->regs; + mode_cfg =readl (regs +S3C64XX_SPI_MODE_CFG ); +if (mode_cfg &S3C64XX_SPI_MODE_4BURST ) + config.maxburst =4 ; +else + config.maxburst =1 ; + config.direction = sdd->tx_dma.direction; config.fifo = sdd->sfr_start +S3C64XX_SPI_TX_DATA ; config.width = sdd->cur_bpw /8 ;
--
1.7.5.4
Grant Likely
AppliedQuoted 5 lines · Boojin Kim
This patch adds dma maxburst size initialization.
The maxburst should be set by MODE_CFGn.DMA_TYPE,
because the pl330 dma driver supports burst mode.Signed-off-by Hyeonkook Kim <[email protected]>
Applied, thanks.
g.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
Quoted 5 lines · Boojin Kim
This patch adds dma maxburst size initialization.
The maxburst should be set by MODE_CFGn.DMA_TYPE,
because the pl330 dma driver supports burst mode.Signed-off-by Hyeonkook Kim <[email protected]>
Hello Hyeonkook,
I applied this patch but then discovered that it relys on the previous patches that you've posted. When patched depend on each other like this please post them as a series with [PATCH x/4] in the subject line. 'git send-email' will format this correctly for you.
g.
Quoted 54 lines
--- drivers/spi/spi-s3c64xx.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)drivers/spi/spi-s3c64xx.c +18
-1@@ -287,10 +287,20 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,struct s3c64xx_spi_driver_data *sdd;struct samsung_dma_prep info;struct samsung_dma_config config; +void __iomem *regs; +unsigned int mode_cfg;if (dma->direction ==DMA_DEV_TO_MEM ) { sdd =container_of ((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); + + regs = sdd->regs; + mode_cfg =readl (regs +S3C64XX_SPI_MODE_CFG ); +if (mode_cfg &S3C64XX_SPI_MODE_4BURST ) + config.maxburst =4 ; +else + config.maxburst =1 ; + config.direction = sdd->rx_dma.direction; config.fifo = sdd->sfr_start +S3C64XX_SPI_RX_DATA ; config.width = sdd->cur_bpw /8 ;@@ -298,6 +308,14 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, }else { sdd =container_of ((void *)dma, struct s3c64xx_spi_driver_data, tx_dma); + + regs = sdd->regs; + mode_cfg =readl (regs +S3C64XX_SPI_MODE_CFG ); +if (mode_cfg &S3C64XX_SPI_MODE_4BURST ) + config.maxburst =4 ; +else + config.maxburst =1 ; + config.direction = sdd->tx_dma.direction; config.fifo = sdd->sfr_start +S3C64XX_SPI_TX_DATA ; config.width = sdd->cur_bpw /8 ; --1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd.
Quoted 5 lines · Boojin Kim
This patch adds dma maxburst size initialization.
The maxburst should be set by MODE_CFGn.DMA_TYPE,
because the pl330 dma driver supports burst mode.Signed-off-by Hyeonkook Kim <[email protected]>
This series probably needs to be merged together through the arm-soc tree.
g.
Quoted 54 lines
--- drivers/spi/spi-s3c64xx.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)drivers/spi/spi-s3c64xx.c +18
-1@@ -287,10 +287,20 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,struct s3c64xx_spi_driver_data *sdd;struct samsung_dma_prep info;struct samsung_dma_config config; +void __iomem *regs; +unsigned int mode_cfg;if (dma->direction ==DMA_DEV_TO_MEM ) { sdd =container_of ((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); + + regs = sdd->regs; + mode_cfg =readl (regs +S3C64XX_SPI_MODE_CFG ); +if (mode_cfg &S3C64XX_SPI_MODE_4BURST ) + config.maxburst =4 ; +else + config.maxburst =1 ; + config.direction = sdd->rx_dma.direction; config.fifo = sdd->sfr_start +S3C64XX_SPI_RX_DATA ; config.width = sdd->cur_bpw /8 ;@@ -298,6 +308,14 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, }else { sdd =container_of ((void *)dma, struct s3c64xx_spi_driver_data, tx_dma); + + regs = sdd->regs; + mode_cfg =readl (regs +S3C64XX_SPI_MODE_CFG ); +if (mode_cfg &S3C64XX_SPI_MODE_4BURST ) + config.maxburst =4 ; +else + config.maxburst =1 ; + config.direction = sdd->tx_dma.direction; config.fifo = sdd->sfr_start +S3C64XX_SPI_TX_DATA ; config.width = sdd->cur_bpw /8 ; --1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 8 lines
Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd. ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb