Skip to contentSkip to conversation

MPPC8560ADS and U-Boot 1.1.1 problems ?

U-Boot-Users Rob Farmer 3 participants 3 messages Jun 27, 2004 – Jun 28, 2004

lore
Share & tools
lore

Rob Farmer

author
#0 lore raw

Greetings,

We trying to install the latest version of U-Boot 1.1.1 on a MPPC 8560ADS development board, this initially does not boot (it actually sits inside in a permanent loop after the first couple of instructions). We have a Abatron debugger with a GDB/DDD interface but we don't seem to be able to step through the code to understand why it doesn't work.

We built U-Boot with the correct settings for the board, I believe that the dev board we're using is one of the support variants.

Are there any known problems with 1.1.1 and the 8560ADS boards ? Any help that any one could give would be extremely useful.

ADVthanxANCE
Rob Farmer
Senior Software Engineer
Accton Technology Ltd UK

Tel: +44 (0) 8700 990400
Fax: +44 (0) 8700 990401
Cell: +44 (0) 7791 509347
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040627/87535972/attachment.htm

#1 lore raw
Quoted 2 lines · In message <001e01c45c5a$99776fd0$9f4cfc3e@RFarmersIBM> you wrote:

We trying to install the latest version of U-Boot 1.1.1 on

This is actually an oxymoron. Either you use the latest version (top of CVS), or version 1.1.1 which is more than 2 months old - read:
OLD.

Quoted 1 line

Are there any known problems with 1.1.1 and the 8560ADS boards ?

As you can see with a simple look at the CHANGELOG file in CVS, a lot of changes have been added since:
http://cvs.sourceforge.net/viewcvs.py/u-boot/u-boot/CHANGELOG?rev=HEAD

Quoted 2 lines

Any help that any one could give would be extremely useful.

Try the current version (top of CVS).

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
       There is enough for the need of everyone in this world,
       but not for the greed of everyone.     - Mahatma Gandhi
#2 lore raw
Quoted 10 lines · Wolfgang Denk
Quoted 2 lines · In message <001e01c45c5a$99776fd0$9f4cfc3e@RFarmersIBM> you wrote:

We trying to install the latest version of U-Boot 1.1.1 on

This is actually an oxymoron. Either you use the latest version (top of CVS), or version 1.1.1 which is more than 2 months old - read:
OLD.

Quoted 1 line

Are there any known problems with 1.1.1 and the 8560ADS boards ?

Quoted 8 lines

As you can see with a simple look at the CHANGELOG file in CVS, a lot of changes have been added since:
http://cvs.sourceforge.net/viewcvs.py/u-boot/u-boot/CHANGELOG?rev=HEAD

Quoted 2 lines

Any help that any one could give would be extremely useful.

Try the current version (top of CVS).

Rob,

You should use the current top of CVS. However, I do not believe that it will work directly either. You must apply the patch that I submitted on 17-June-2004 called MPC85XXADS-20040617-diffs.tgz. That patch will complete the changes that were started and applied to the CVS tree a couple weeks earlier.

Please let me know how that goes.

Also, if you could, please let me know if you have a "Rev A" board or something else.

Thanks,
jdl