Skip to contentSkip to conversation

How to install redhat9.0 on SATA harddisk

DISCUSSION Alex LIU 3 participants 3 messages Jun 28, 2005

lore
Share & tools
lore

Alex LIU

author
#0 lore raw

Hi,all:

How to install redhat9.0 on a SATA 80G harddisk? When I boot from the redhat9.0 CD it said couldn't find the harddisk. So there's no SATA driver. Then how to create a SATA driver disk? I didn't find it on the redhat website. Thanks a lot!

Alex

#1 lore raw
Quoted 8 lines · Alex LIU

Hi,all:

How to install redhat9.0 on a SATA 80G harddisk? When I boot from the redhat9.0 CD it said couldn't find the harddisk. So there's no SATA driver. Then how to create a SATA driver disk? I didn't find it on the redhat website. Thanks a lot!

Alex

RH9.0 is sufficiently ancient that there is no SATA support. IIRC the drives themselves did not become available until around the time of fedora core 1's release.

You would be far more able to handle modern hardware if you downloaded the FC4 set of iso's and burnt them to a fresh set of cdr's.

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.35% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
#2 lore raw
In reply to Alex LIU
Quoted 6 lines · Alex LIU

Hi,all:

How to install redhat9.0 on a SATA 80G harddisk? When I boot from the redhat9.0 CD it said couldn't find the harddisk. So there's no SATA driver. Then how to create a SATA driver disk? I didn't find it on the redhat website. Thanks a lot!

This mailing list isn't for either Red Hat or installation issues.

That said, Red Hat 9.0 is old, unsupported, and predates SATA. You'd be much better off trying to get Fedora installed on that machine, and contact the Red Hat Fedora mailing lists if you have problems.

-Doug