Strange error!?
I was using this setup and it worked fine untill i executed up2date in Redhat and updated a lot of the packages in linux.
When i run the following script i get an error, which i pasted bellow.
Script i run:
iptables -t mangle -A FORWARD -s 171.100.20.110 -j
MARK --set-mark 28
iptables -t mangle -A POSTROUTING -s ! 171.100.20.96/27 -d171.100.20.110 -j MARK --set-mark 29
#Root QDiscs
#### upstream
tc qdisc add dev $WAN root handle 1: htb default 16
#### downstream
tc qdisc add dev $LAN root handle 1: htb default 16
########### Classes ###########
########### Uploads
tc class add dev $WAN parent 1: classid 1:1 htb rate 100mbitceil 100mbit
tc class add dev $WAN parent 1:1 classid 1:10 htb rate 64kbit
ceil 64kbit
tc class add dev $WAN parent 1:1 classid 1:11 htb rate 128kbit
ceil 128kbit
########### Downloads
tc class add dev $LAN parent 1: classid 1:1 htb rate 100mbit
ceil 100mbit
tc class add dev $LAN parent 1:1 classid 1:10 htb rate 128kbit
ceil 128kbit
tc class add dev $LAN parent 1:1 classid 1:11 htb rate 256kbit
ceil 256kbit
########### Filter and send to correct classid ###########
########### Downloads
tc filter add dev $LAN parent 1:0 protocol ip prio 7 handle 29fw classid 1:10
########### Uploads
tc filter add dev $WAN parent 1:0 protocol ip prio 7 handle 28
fw classid 1:10
########### Making the QDiscs
tc qdisc add dev $LAN parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev $LAN parent 1:11 handle 11: sfq perturb 10 tc qdisc add dev $WAN parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev $WAN parent 1:11 handle 11: sfq perturb 10
THIS HAS WORKED BEFORE!
Now the error i get is:
Unknown qdisc "htb", hence option "default" is unparsable Unknown qdisc "htb", hence option "default" is unparsable
Error: Qdisc "htb" is classless.
Error: Qdisc "htb" is classless.
Error: Qdisc "htb" is classless.
Error: Qdisc "htb" is classless.
Error: Qdisc "htb" is classless.
Error: Qdisc "htb" is classless.
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory
What the hell happend?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Do you have kernel support for HTB?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
As i said this has worked before, a few days ago it was running perfectly.
But let's pretend i dont, how do i check if my kernel supports HTB?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
In '/boot' directory you should have a file named 'config-xxx-(kernel version)'. Open it and there you have to look for a line like that:
CONFIG_NET_SCH_HTB=y
orCONFIG_NET_SCH_HTB=m
Also if you have htb as a module, be sure that it is loaded.
Regards: Ilia
Quoted 10 lines · Cow
As i said this has worked before, a few days ago it was running perfectly.
But let's pretend i dont, how do i check if my kernel supports HTB?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have the following in config:CONFIG_NET_SCH_HTB=m
So should be ok.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Dunno if the module is loaded, but i found it here:/lib/modules/2.4.20-8/kernel/net/sched/sch_htb.o
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
check that it's loaded with 'lsmod'
Quoted 8 lines · Cow
Dunno if the module is loaded, but i found it here:
/lib/modules/2.4.20-8/kernel/net/sched/sch_htb.o_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Seems like it's loaded and running:
Module Size Used by Not tainted cls_fw 3512 1 (autoclean) sch_ingress 2848 0 (autoclean) cls_u32 6300 0 (autoclean) sch_sfq 4096 2 (autoclean)
sch_htb 22016 1 (autoclean)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Cow
I was using this setup and it worked fine untill i executed up2date in Redhat and updated a lot of the packages in linux.
Unknown qdisc "htb", hence option "default" is unparsable
Maybe it updated the tc binary to one that doesn't know about HTB.
Try posting to a redhat list.
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/