Skip to contentSkip to conversation

lvcreate seg faults in 1.0.1-r4

linux-lvm Tim Nichols 3 participants 4 messages Nov 24, 2001 – Nov 26, 2001

lore
Share & tools
lore
#0 lore raw

I am having trouble getting lvcreate to work. I've been able to create the PV and VG, but lvcreate always core dumps with a seg fault. I've confirmed that I have the same code level in the kernel and tools (1.0.1-rc4). I've tried compiling the tools with gcc (v2.96) and egcs (v2.91.66), but both fail. I'm running a 2.4.14 kernel, lvm as a module, and glibc-2.2.4-19.
The problem seems to be with a corrupt lvol name from what I see in the gdb output I've attached.

Any help would be great.

Tim

[root@monolith /root]# gcc -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)

[root@monolith /root]# egcs -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/specs gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)

[root@monolith /root]# cat /proc/lvm/global
LVM module LVM version 1.0.1-rc4(03/10/2001)

Total:  1 VG  1 PV  0 LVs (0 LVs open)
Global: 3175 bytes malloced   IOP version: 10   2:05:33 active

VG: vg00 [1 PV, 0 LV/0 open] PE Size: 4096 KB
Usage [KB/PE]: 6635520 /1620 total 0 /0 used 6635520 /1620 free
PV: [AA] hdf1 6635520 /1620 0 /0 6635520 /
1620
LVs: none

[root@monolith /root]# lvcreate -L 1500 -n lvol1 vg00 Segmentation fault (core dumped)

[root@monolith /root]# lvcreate -L1500 -nlvol1 vg00 Segmentation fault (core dumped)

[root@monolith /root]# gdb lvcreate
GNU gdb 5.0rh-5 Red Hat Linux 7.1
Copyright 2001 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-redhat-linux"...
(no debugging symbols found)...
(gdb) run -L1500 -nlvol1 vg00
Starting program: /sbin/lvcreate -L1500 -nlvol1 vg00

Program received signal SIGSEGV, Segmentation fault. lv_create (vg=0x4, lv=0xbffff9f4,

    lv_name=0xbffffa08 "6ûÿ¿@ûÿ¿fûÿ¿{ûÿ¿\223ûÿ¿µûÿ¿Ôûÿ¿àûÿ¿êûÿ¿­ýÿ¿Ìýÿ¿æýÿ¿ûýÿ¿\

022þÿ¿\035þÿ¿Gþÿ¿Tþÿ¿\\þÿ¿lþÿ¿zþÿ¿\210þÿ¿\231þÿ¿§þÿ¿Éþÿ¿âþÿ¿íþÿ¿øþÿ¿+ÿÿ¿Úÿÿ¿")
at lv_create_remove.c:42
42 int lv_create ( vg_t *vg, lv_t *lv, char *lv_name) {
(gdb) where
#0 lv_create (vg=0x4, lv=0xbffff9f4,

    lv_name=0xbffffa08 "6ûÿ¿@ûÿ¿fûÿ¿{ûÿ¿\223ûÿ¿µûÿ¿Ôûÿ¿àûÿ¿êûÿ¿­ýÿ¿Ìýÿ¿æýÿ¿ûýÿ¿\

022þÿ¿\035þÿ¿Gþÿ¿Tþÿ¿\\þÿ¿lþÿ¿zþÿ¿\210þÿ¿\231þÿ¿§þÿ¿Éþÿ¿âþÿ¿íþÿ¿øþÿ¿+ÿÿ¿Úÿÿ¿")
at lv_create_remove.c:42
#1 0x0804b03d in strcpy ()
#2 0x40074627 in __libc_start_main (main=0x8049390 <strcpy+384>, argc=4,

    ubp_av=0xbffff9f4, init=0x8048e88 <_init>, fini=0x804b4d0 <_fini>,
    rtld_fini=0x4000dcd4 <_dl_fini>, stack_end=0xbffff9ec)
    at ../sysdeps/generic/libc-start.c:129

(gdb) quit
The program is running. Exit anyway? (y or n) y

[root@monolith /root]# uname -a
Linux monolith 2.4.14 #49 Sat Nov 24 00:27:41 PST 2001 i686 unknown

#1 lore raw

Tim,

Quoted 5 lines · Tim Nichols

I am having trouble getting lvcreate to work. I've been able to create the PV and VG, but lvcreate always core dumps with a seg fault. I've confirmed that I have the same code level in the kernel and tools (1.0.1-rc4). I've tried compiling the tools with gcc (v2.96) and egcs (v2.91.66), but both fail. I'm running a 2.4.14

try to compile the lvm userspace utilities without opimisation (-O0).

good luck

Nils

Quoted 3 lines
  Nils Juergens  | [email protected] | icq 7090774   <
 If we all work hard, we can turn this company  <
     around 360 degrees -- gruntbert(LOTD)      <
#2 lore raw

That seems to have solved the problem.

Thanks....

Tim

----- Original Message -----
From: "Nils Juergens" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 25, 2001 10:12 AM
Subject: Re: [linux-lvm] lvcreate seg faults in 1.0.1-r4

Quoted 26 lines

Tim,

Quoted 5 lines · Tim Nichols

I am having trouble getting lvcreate to work. I've been able to create the PV and VG, but lvcreate always core dumps with a seg fault. I've confirmed that I have the same code level in the kernel and tools (1.0.1-rc4). I've tried compiling the tools with gcc (v2.96) and egcs (v2.91.66), but both fail. I'm running a 2.4.14

try to compile the lvm userspace utilities without opimisation (-O0).

good luck

Nils

Quoted 3 lines
  Nils Juergens  | [email protected] | icq 7090774   <
 If we all work hard, we can turn this company  <
     around 360 degrees -- gruntbert(LOTD)      <

_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html

#3 lore raw
In reply to Tim Nichols

Hello Tim,

You have a problem with gcc 2.96 (I have the same problem with a
RedHat 7.2 gcc 2.96), Change in the file "<lvm_path_source>/make.tmpl" the line "CFLAGS+= -g -O2 -Wall -pg" by "CFLAGS+= -g -O0 -Wall -pg" and recompile the lvm utilities.

Best regards

Francis

Quoted 84 lines · Tim Nichols

I am having trouble getting lvcreate to work. I've been able to create the PV and VG, but lvcreate always core dumps with a seg fault. I've confirmed that I have the same code level in the kernel and tools (1.0.1-rc4). I've tried compiling the tools with gcc (v2.96) and egcs (v2.91.66), but both fail. I'm running a 2.4.14 kernel, lvm as a module, and glibc-2.2.4-19.

The problem seems to be with a corrupt lvol name from what I see in
the gdb output I've attached.

Any help would be great.

Tim

[root@monolith /root]# gcc -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)

[root@monolith /root]# egcs -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/specs gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)

[root@monolith /root]# cat /proc/lvm/global
LVM module LVM version 1.0.1-rc4(03/10/2001)

Total:  1 VG  1 PV  0 LVs (0 LVs open)
Global: 3175 bytes malloced   IOP version: 10   2:05:33 active

VG: vg00 [1 PV, 0 LV/0 open] PE Size: 4096 KB
Usage [KB/PE]: 6635520 /1620 total 0 /0 used 6635520 /1620 free
PV: [AA] hdf1 6635520 /1620 0 /0
6635520 /
1620
LVs: none

[root@monolith /root]# lvcreate -L 1500 -n lvol1 vg00 Segmentation fault (core dumped)

[root@monolith /root]# lvcreate -L1500 -nlvol1 vg00 Segmentation fault (core dumped)

[root@monolith /root]# gdb lvcreate
GNU gdb 5.0rh-5 Red Hat Linux 7.1
Copyright 2001 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-redhat-linux"...
(no debugging symbols found)...
(gdb) run -L1500 -nlvol1 vg00
Starting program: /sbin/lvcreate -L1500 -nlvol1 vg00

Program received signal SIGSEGV, Segmentation fault. lv_create (vg=0x4, lv=0xbffff9f4,

    lv_name=0xbffffa08 " 

6ûÿ¿@ûÿ¿fûÿ¿{ûÿ¿\223ûÿ¿µûÿ¿Ôûÿ¿àûÿ¿êûÿ¿­ýÿ¿Ìýÿ¿æýÿ¿ûýÿ¿\ <mailto:6%FB%FF%BF@%FB%FF%BFf%FB%FF%BF%7B%FB%FF%BF%5C223%FB%FF%BF%B5%FB%FF%BF%D4%FB%FF%BF%E0%FB%FF%BF%EA%FB%FF%BF%AD%FD%FF%BF%CC%FD%FF%BF%E6%FD%FF%BF%FB%FD%FF%BF%5C> 022þÿ¿\035þÿ¿Gþÿ¿Tþÿ¿\\þÿ¿lþÿ¿zþÿ¿\210þÿ¿\231þÿ¿§þÿ¿Éþÿ¿âþÿ¿íþÿ¿øþÿ¿+ÿÿ¿Úÿÿ¿")
at lv_create_remove.c:42
42 int lv_create ( vg_t *vg, lv_t *lv, char *lv_name) {
(gdb) where
#0 lv_create (vg=0x4, lv=0xbffff9f4,

    lv_name=0xbffffa08 " 

6ûÿ¿@ûÿ¿fûÿ¿{ûÿ¿\223ûÿ¿µûÿ¿Ôûÿ¿àûÿ¿êûÿ¿­ýÿ¿Ìýÿ¿æýÿ¿ûýÿ¿\ <mailto:6%FB%FF%BF@%FB%FF%BFf%FB%FF%BF%7B%FB%FF%BF%5C223%FB%FF%BF%B5%FB%FF%BF%D4%FB%FF%BF%E0%FB%FF%BF%EA%FB%FF%BF%AD%FD%FF%BF%CC%FD%FF%BF%E6%FD%FF%BF%FB%FD%FF%BF%5C> 022þÿ¿\035þÿ¿Gþÿ¿Tþÿ¿\\þÿ¿lþÿ¿zþÿ¿\210þÿ¿\231þÿ¿§þÿ¿Éþÿ¿âþÿ¿íþÿ¿øþÿ¿+ÿÿ¿Úÿÿ¿")
at lv_create_remove.c:42
#1 0x0804b03d in strcpy ()
#2 0x40074627 in __libc_start_main (main=0x8049390 <strcpy+384>, argc=4,

    ubp_av=0xbffff9f4, init=0x8048e88 <_init>, fini=0x804b4d0 <_fini>,
    rtld_fini=0x4000dcd4 <_dl_fini>, stack_end=0xbffff9ec)
    at ../sysdeps/generic/libc-start.c:129

(gdb) quit
The program is running. Exit anyway? (y or n) y

[root@monolith /root]# uname -a
Linux monolith 2.4.14 #49 Sat Nov 24 00:27:41 PST 2001 i686 unknown