mmc: core: add ignorance case for CMD13 CRC error
PATCH 2/3 mmc: core: add ignorance case for CMD13 CRC error
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
--- drivers/mmc/core/mmc_ops.c | 23 ++++++++++++++++++++--- 1 files changed, 20 insertions(+), 3 deletions(-)
drivers/mmc/core/mmc_ops.c +20 -3
@@ -23,6 +23,9 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc); +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;
@@ -380,6 +383,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc;BUG_ON (!card);BUG_ON (!card->host);
@@ -408,10 +412,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ + ignore_crc = (index ==EXT_CSD_HS_TIMING ) ? true : false; timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
@@ -449,7 +458,8 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc) {int err;struct mmc_command cmd = {0 };
@@ -461,6 +471,8 @@ int mmc_send_status(struct mmc_card *card, u32 *status)if (!mmc_host_is_spi (card->host)) cmd.arg = card->rca <<16 ; cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES );if (err)
@@ -475,6 +487,11 @@ int mmc_send_status(struct mmc_card *card, u32 *status)return 0 ; } +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len)
Signature · 1 line
1.7.0.4
Quoted 15 lines · Seungwon Jeon
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
Signed-off-by Seungwon Jeon <[email protected]>--- drivers/mmc/core/mmc_ops.c | 23 ++++++++++++++++++++--- 1 files changed, 20 insertions(+), 3 deletions(-)drivers/mmc/core/mmc_ops.c +0
-0
drivers/mmc/core/mmc_ops.c line 28
Quoted 6 lines
drivers/mmc/core/mmc_ops.c +3
-0@@ -23,6 +23,9 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc); +
I suggest to move the implementation here as well. Thus no specific pre-declaration is needed.
Otherwise it looks good!
Kind regards
Ulf Hansson
Quoted 68 lines
drivers/mmc/core/mmc_ops.c +17
-4static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;@@ -380,6 +383,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc;BUG_ON (!card);BUG_ON (!card->host);@@ -408,10 +412,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ + ignore_crc = (index ==EXT_CSD_HS_TIMING ) ? true : false; timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)@@ -449,7 +458,8 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc) {int err;struct mmc_command cmd = {0 };@@ -461,6 +471,8 @@ int mmc_send_status(struct mmc_card *card, u32 *status)if (!mmc_host_is_spi (card->host)) cmd.arg = card->rca <<16 ; cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES );if (err)@@ -475,6 +487,11 @@ int mmc_send_status(struct mmc_card *card, u32 *status)return 0 ; } +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len) --1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 1/1 mmc: add ignorance case for CMD13 CRC error
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
---
Change in v2:
- Removed function declaration.(From Ulf Hansson)
drivers/mmc/core/mmc_ops.c | 70 ++++++++++++++++++++++++++----------------- 1 files changed, 42 insertions(+), 28 deletions(-)
drivers/mmc/core/mmc_ops.c +42 -28
@@ -23,6 +23,40 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc) +{ +int err; +struct mmc_command cmd = {0 }; + +BUG_ON (!card); +BUG_ON (!card->host); + + cmd.opcode =MMC_SEND_STATUS ; +if (!mmc_host_is_spi (card->host)) + cmd.arg = card->rca <<16 ; + cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; + + err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); +if (err) +return err; + +/* NOTE: callers are required to understand the difference +* between "native" and SPI format status words! +*/ +if (status) + *status = cmd.resp[0 ]; + +return 0 ; +} + +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;
@@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc;BUG_ON (!card);BUG_ON (!card->host);
@@ -408,10 +443,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ + ignore_crc = (index ==EXT_CSD_HS_TIMING ) ? true : false; timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
@@ -449,32 +489,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) -{ -int err; -struct mmc_command cmd = {0 }; - -BUG_ON (!card); -BUG_ON (!card->host); - - cmd.opcode =MMC_SEND_STATUS ; -if (!mmc_host_is_spi (card->host)) - cmd.arg = card->rca <<16 ; - cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; - - err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); -if (err) -return err; - -/* NOTE: callers are required to understand the difference -* between "native" and SPI format status words! -*/ -if (status) - *status = cmd.resp[0 ]; - -return 0 ; -} -static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len)
Signature · 1 line
1.7.0.4
RE: [PATCH v2] mmc: add ignorance case for CMD13 CRC error
Quoted 9 lines · Seungwon Jeon
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
Signed-off-by Seungwon Jeon <[email protected]>---
Change in v2:
- Removed function declaration.(From Ulf Hansson)
Hi Ulf,
I hope that you find this change.
Thanks,
Seungwon Jeon
Quoted 116 lines
drivers/mmc/core/mmc_ops.c | 70 ++++++++++++++++++++++++++----------------- 1 files changed, 42 insertions(+), 28 deletions(-)drivers/mmc/core/mmc_ops.c +42
-29@@ -23,6 +23,40 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc) +{ +int err; +struct mmc_command cmd = {0 }; + +BUG_ON (!card); +BUG_ON (!card->host); + + cmd.opcode =MMC_SEND_STATUS ; +if (!mmc_host_is_spi (card->host)) + cmd.arg = card->rca <<16 ; + cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; + + err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); +if (err) +return err; + +/* NOTE: callers are required to understand the difference +* between "native" and SPI format status words! +*/ +if (status) + *status = cmd.resp[0 ]; + +return 0 ; +} + +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;@@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc;BUG_ON (!card);BUG_ON (!card->host);@@ -408,10 +443,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ + ignore_crc = (index ==EXT_CSD_HS_TIMING ) ? true : false; timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)@@ -449,32 +489,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) -{ -int err; -struct mmc_command cmd = {0 }; - -BUG_ON (!card); -BUG_ON (!card->host); - - cmd.opcode =MMC_SEND_STATUS ; -if (!mmc_host_is_spi (card->host)) - cmd.arg = card->rca <<16 ; - cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; - - err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); -if (err) -return err; - -/* NOTE: callers are required to understand the difference -* between "native" and SPI format status words! -*/ -if (status) - *status = cmd.resp[0 ]; - -return 0 ; -} -static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len) --1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] mmc: add ignorance case for CMD13 CRC error
In reply to Seungwon JeonQuoted 18 lines · Seungwon Jeon
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
Signed-off-by Seungwon Jeon <[email protected]>---
Change in v2:
- Removed function declaration.(From Ulf Hansson)drivers/mmc/core/mmc_ops.c | 70 ++++++++++++++++++++++++++----------------- 1 files changed, 42 insertions(+), 28 deletions(-)drivers/mmc/core/mmc_ops.c +0
-0
drivers/mmc/core/mmc_ops.c line 27
Quoted 5 lines
drivers/mmc/core/mmc_ops.c +2
-0@@ -23,6 +23,40 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc)
Is there any specific reason to you made this function inline?
Quoted 44 lines
drivers/mmc/core/mmc_ops.c +33
-0+{ +int err; +struct mmc_command cmd = {0 }; + +BUG_ON (!card); +BUG_ON (!card->host); + + cmd.opcode =MMC_SEND_STATUS ; +if (!mmc_host_is_spi (card->host)) + cmd.arg = card->rca <<16 ; + cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; + + err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); +if (err) +return err; + +/* NOTE: callers are required to understand the difference +* between "native" and SPI format status words! +*/ +if (status) + *status = cmd.resp[0 ]; + +return 0 ; +} + +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;@@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc;BUG_ON (!card);BUG_ON (!card->host);
drivers/mmc/core/mmc_ops.c int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, · line 451
Quoted 10 lines
drivers/mmc/core/mmc_ops.c +6
-1@@ -408,10 +443,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ + ignore_crc = (index ==EXT_CSD_HS_TIMING ) ? true : false;
You need to consider MMC_CAP_WAIT_WHILE_BUSY in the condition for "ignore_crc" as well. Otherwise you will ignore CRC in cases where we actually can detect it.
Kind regards
Ulf Hansson
Quoted 44 lines
drivers/mmc/core/mmc_ops.c +1
-28timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)@@ -449,32 +489,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) -{ -int err; -struct mmc_command cmd = {0 }; - -BUG_ON (!card); -BUG_ON (!card->host); - - cmd.opcode =MMC_SEND_STATUS ; -if (!mmc_host_is_spi (card->host)) - cmd.arg = card->rca <<16 ; - cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; - - err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); -if (err) -return err; - -/* NOTE: callers are required to understand the difference -* between "native" and SPI format status words! -*/ -if (status) - *status = cmd.resp[0 ]; - -return 0 ; -} -static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len) --1.7.0.4
RE: [PATCH v2] mmc: add ignorance case for CMD13 CRC error
Quoted 20 lines · Ulf Hansson
Quoted 19 lines · Seungwon Jeon
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
Signed-off-by Seungwon Jeon <[email protected]>---
Change in v2:
- Removed function declaration.(From Ulf Hansson)drivers/mmc/core/mmc_ops.c | 70 ++++++++++++++++++++++++++----------------- 1 files changed, 42 insertions(+), 28 deletions(-)drivers/mmc/core/mmc_ops.c +0
-0@@ -23,6 +23,40 @@
Quoted 6 lines
drivers/mmc/core/mmc_ops.c line 27
Quoted 4 lines
drivers/mmc/core/mmc_ops.c +2
-0#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc)Is there any specific reason to you made this function inline?
First, when considering that mmc_send_status() just wraps __mmc_send_status(), we can reduce call stack though it seems trivial.
And __mmc_send_status() will be used only in 'mmc_ops.c'. Currently it is called in do~while loop. inline function could be helpful to avoid frequent call.
Quoted 48 lines
Quoted 48 lines
drivers/mmc/core/mmc_ops.c +33
-0+{ +int err; +struct mmc_command cmd = {0 }; + +BUG_ON (!card); +BUG_ON (!card->host); + + cmd.opcode =MMC_SEND_STATUS ; +if (!mmc_host_is_spi (card->host)) + cmd.arg = card->rca <<16 ; + cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; + + err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); +if (err) +return err; + +/* NOTE: callers are required to understand the difference +* between "native" and SPI format status words! +*/ +if (status) + *status = cmd.resp[0 ]; + +return 0 ; +} + +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;@@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc;BUG_ON (!card);BUG_ON (!card->host);@@ -408,10 +443,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ;
Quoted 11 lines
drivers/mmc/core/mmc_ops.c int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, · line 451
Quoted 7 lines
drivers/mmc/core/mmc_ops.c +6
-1-/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ + ignore_crc = (index ==EXT_CSD_HS_TIMING ) ? true : false;You need to consider
MMC_CAP_WAIT_WHILE_BUSYin the condition for "ignore_crc" as well. Otherwise you will ignore CRC in cases where we actually can detect it.
Ok, it would be good.
Thanks,
Seungwon Jeon
Quoted 53 lines
Kind regards
Ulf HanssonQuoted 41 lines
drivers/mmc/core/mmc_ops.c +1
-28timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)@@ -449,32 +489,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) -{ -int err; -struct mmc_command cmd = {0 }; - -BUG_ON (!card); -BUG_ON (!card->host); - - cmd.opcode =MMC_SEND_STATUS ; -if (!mmc_host_is_spi (card->host)) - cmd.arg = card->rca <<16 ; - cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; - - err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); -if (err) -return err; - -/* NOTE: callers are required to understand the difference -* between "native" and SPI format status words! -*/ -if (status) - *status = cmd.resp[0 ]; - -return 0 ; -} -static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len) --Quoted 3 lines
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v3 1/1 mmc: add ignorance case for CMD13 CRC error
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
---
Change in v3:
- Adjusted condition with MMC_CAP_WAIT_WHILE_BUSY.(From Ulf Hansson)
Change in v2:
- Removed function declaration.(From Ulf Hansson)
drivers/mmc/core/mmc_ops.c | 73 +++++++++++++++++++++++++++----------------- 1 files changed, 45 insertions(+), 28 deletions(-)
drivers/mmc/core/mmc_ops.c +45 -28
@@ -23,6 +23,40 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc) +{ +int err; +struct mmc_command cmd = {0 }; + +BUG_ON (!card); +BUG_ON (!card->host); + + cmd.opcode =MMC_SEND_STATUS ; +if (!mmc_host_is_spi (card->host)) + cmd.arg = card->rca <<16 ; + cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; + + err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); +if (err) +return err; + +/* NOTE: callers are required to understand the difference +* between "native" and SPI format status words! +*/ +if (status) + *status = cmd.resp[0 ]; + +return 0 ; +} + +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;
@@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc = false;BUG_ON (!card);BUG_ON (!card->host);
@@ -408,10 +443,18 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ +if (index ==EXT_CSD_HS_TIMING && + !(card->host->caps &MMC_CAP_WAIT_WHILE_BUSY )) + ignore_crc = true; + timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
@@ -449,32 +492,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) -{ -int err; -struct mmc_command cmd = {0 }; - -BUG_ON (!card); -BUG_ON (!card->host); - - cmd.opcode =MMC_SEND_STATUS ; -if (!mmc_host_is_spi (card->host)) - cmd.arg = card->rca <<16 ; - cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; - - err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); -if (err) -return err; - -/* NOTE: callers are required to understand the difference -* between "native" and SPI format status words! -*/ -if (status) - *status = cmd.resp[0 ]; - -return 0 ; -} -static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len)
Signature · 1 line
1.7.0.4
Re: [PATCH v3] mmc: add ignorance case for CMD13 CRC error
Quoted 124 lines · Seungwon Jeon
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
Signed-off-by Seungwon Jeon <[email protected]>---
Change in v3:
- Adjusted condition with MMC_CAP_WAIT_WHILE_BUSY.(From Ulf Hansson)Change in v2:
- Removed function declaration.(From Ulf Hansson)drivers/mmc/core/mmc_ops.c | 73 +++++++++++++++++++++++++++----------------- 1 files changed, 45 insertions(+), 28 deletions(-)drivers/mmc/core/mmc_ops.c +45
-29@@ -23,6 +23,40 @@#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000)/* 10 minute timeout */ +static inline int __mmc_send_status (struct mmc_card *card,u32 *status, +bool ignore_crc) +{ +int err; +struct mmc_command cmd = {0 }; + +BUG_ON (!card); +BUG_ON (!card->host); + + cmd.opcode =MMC_SEND_STATUS ; +if (!mmc_host_is_spi (card->host)) + cmd.arg = card->rca <<16 ; + cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; +if (ignore_crc) + cmd.flags &= ~MMC_RSP_CRC ; + + err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); +if (err) +return err; + +/* NOTE: callers are required to understand the difference +* between "native" and SPI format status words! +*/ +if (status) + *status = cmd.resp[0 ]; + +return 0 ; +} + +int mmc_send_status (struct mmc_card *card,u32 *status) +{ +return __mmc_send_status (card, status, false); +} +static int _mmc_select_card (struct mmc_host *host,struct mmc_card *card) {int err;@@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,struct mmc_command cmd = {0 };unsigned long timeout;u32 status; +bool ignore_crc = false;BUG_ON (!card);BUG_ON (!card->host);@@ -408,10 +443,18 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,if (!use_busy_signal)return 0 ; -/* Must check status to be sure of no errors */ +/* +* Must check status to be sure of no errors +* If CMD13 is to check the busy completion of the timing change, +* disable the check of CRC error. +*/ +if (index ==EXT_CSD_HS_TIMING && + !(card->host->caps &MMC_CAP_WAIT_WHILE_BUSY )) + ignore_crc = true; + timeout = jiffies +msecs_to_jiffies (MMC_OPS_TIMEOUT_MS ); do { - err = mmc_send_status(card, &status); + err = __mmc_send_status(card, &status, ignore_crc); if (err) return err; if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)@@ -449,32 +492,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, }EXPORT_SYMBOL_GPL (mmc_switch); -int mmc_send_status (struct mmc_card *card,u32 *status) -{ -int err; -struct mmc_command cmd = {0 }; - -BUG_ON (!card); -BUG_ON (!card->host); - - cmd.opcode =MMC_SEND_STATUS ; -if (!mmc_host_is_spi (card->host)) - cmd.arg = card->rca <<16 ; - cmd.flags =MMC_RSP_SPI_R2 |MMC_RSP_R1 |MMC_CMD_AC ; - - err =mmc_wait_for_cmd (card->host, &cmd,MMC_CMD_RETRIES ); -if (err) -return err; - -/* NOTE: callers are required to understand the difference -* between "native" and SPI format status words! -*/ -if (status) - *status = cmd.resp[0 ]; - -return 0 ; -} -static int mmc_send_bus_test (struct mmc_card *card,struct mmc_host *host,u8 opcode,u8 len) --
Quoted 3 lines
1.7.0.4
Re: [PATCH v3] mmc: add ignorance case for CMD13 CRC error
Hi,
Quoted 9 lines · Ulf Hansson
Quoted 6 lines · Seungwon Jeon
While speed mode is changed, CMD13 cannot be guaranteed. According to the spec., it is not recommended to use CMD13 to check the busy completion of the timing change. If CMD13 is used in this case, CRC error must be ignored.
Signed-off-by Seungwon Jeon <[email protected]>Acked-by Ulf Hansson <[email protected]>
Thanks, pushed to mmc-next for 3.13 with Ulf's ACK.
- Chris.
Signature · 1 line
Chris Ball <[email protected]> <http://printf.net/>