Device tree on ppc board
Hi,
I work on a custom board, MPC8248 based (my reference BSP was MPC8260ADS), with uboot 1.1.4 and linux 2.6.11, and works perfectly.
We have to pass to linux 2.6.27, and it is just the version from which ppc and powerpc has been merged, and device tree the unique way to pass 'bdinfo'. The uboot version can't be more than 1.1.6, the linux must be 2.6.27, and I can't find the information if it's compatible.
Can anybody affirm me if it's possible, and how to do it in linux 1.1.4 ?
How do we change the bdinfo structure header to device tree, is there any board which uses this feature ?
Thank you !
Quoted 5 lines · Olivier DAVID
I work on a custom board, MPC8248 based (my reference BSP was MPC8260ADS), with uboot 1.1.4 and linux 2.6.11, and works perfectly.
We have to pass to linux 2.6.27, and it is just the version from which ppc and powerpc has been merged,
It was merged quite a bit earlier, that's just when the old fork was finally discarded.
Quoted 2 lines
and device tree the unique way to pass 'bdinfo'. The uboot version can't be more than 1.1.6,
Why not?
Quoted 1 line
the linux must be 2.6.27,
Why 2.6.27 and not, say, 2.6.30? You may have problems with PCI DMA in 2.6.27, for example. In general, it's best to go with the latest unless you have a specific reason otherwise.
Quoted 1 line
and I can't find the information if it's compatible.
You can boot using cuImage if you must stay with an old u-boot. Add cuImage entries for your board in arch/powerpc/boot/Makefile and arch/powerpc/boot/wrapper, then make zImage.
Quoted 4 lines
Can anybody affirm me if it's possible, and how to do it in linux 1.1.4 ?
How do we change the bdinfo structure header to device tree, is there any board which uses this feature ?
mpc8272ads is probably the closest board to yours; you could use its device tree as an example.
-Scott
Quoted 6 lines · On Tue, 23 Jun 2009 22:57:50 +0200 "Olivier DAVID" <[email protected]>…
I work on a custom board, MPC8248 based (my reference BSP was MPC8260ADS), with uboot 1.1.4 and linux 2.6.11, and works perfectly.
We have to pass to linux 2.6.27, and it is just the version from which ppc and powerpc has been merged, and device tree the unique way to pass 'bdinfo'. The uboot version can't be more than 1.1.6, the linux must be
if you're going to go from a Jan. 2005 u-boot to a Nov. 2006 u-boot, looking to boot an Oct. 2008 kernel, why not just go all the way to the present versions on both?
Quoted 6 lines
2.6.27, and I can't find the information if it's compatible.
Can anybody affirm me if it's possible, and how to do it in linux 1.1.4 ?
How do we change the bdinfo structure header to device tree, is there any board which uses this feature ?
if you really cannot update u-boot, try making a linux cuImage for your board; it contains a wrapper that combines the device tree and bdinfo, then boots the linux kernel proper.
as a guide, see e.g., the ep8248e dts in linux-2.6/arch/powerpc/boot/dts, and corresponding platform code in linux-2.6/arch/powerpc/platforms/82xx.
please also consider submitting patches for your board to both upstream projects, so this problem doesn't occur again in the future.
Kim