Skip to contentSkip to conversation

Status of ADI AD1888

DISCUSSION Carlos Fernandez Sanz 3 participants 4 messages Jan 23, 2004 – Jan 26, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

Is the ADI AD1888 chipset supported yet? I'm asking because it doesn't seem to work out-of-the-box with Alsa 1.0.1, however Asus does have a driver in their page (see download area for their P4P800S motherboard), but it's for Alsa 0.9.

I have never developed an Alsa driver (or any driver for that matter) but I'm a linux programmer so if no effort has been done yet I could try doing the port.

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

#1 lore raw
Quoted 6 lines · Carlos Fernandez Sanz

Hi,

Is the ADI AD1888 chipset supported yet? I'm asking because it doesn't seem to work out-of-the-box with Alsa 1.0.1, however Asus does have a driver in their page (see download area for their P4P800S motherboard), but it's for Alsa 0.9.

I'm fairly certain that you can use the intel8x0 driver for P4P800S.

- D

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

#2 lore raw

David,

Apparently not. I've been doing some research and while the driver loads, etc, I get no sound (everything to the max in the mixer, speakers plugged, etc :-)). If I hadn't find anyone else with the exact same problem I would just assume I'm plain stupid (or add item to the list proving it)...

As a matter of fact just today in the linux-dev mailing list a couple of guys say the same thing (see Alsa vs OSS topic).

----- Original Message -----
From: "David Lloyd" <[email protected]>
To: "Carlos Fernandez Sanz" <[email protected]>
Cc: <[email protected]>
Sent: Friday, January 23, 2004 20:19
Subject: Re: [Alsa-devel] Status of ADI AD1888

Quoted 14 lines · Carlos Fernandez Sanz
Quoted 7 lines

Hi,

Is the ADI AD1888 chipset supported yet? I'm asking because it doesn't seem to work out-of-the-box with Alsa 1.0.1, however Asus does have a driver in their page (see download area for their P4P800S motherboard), but it's for Alsa 0.9.

I'm fairly certain that you can use the intel8x0 driver for P4P800S.

- D

Quoted 10 lines

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

#3 lore raw

At Fri, 23 Jan 2004 20:50:36 +0100,

Quoted 7 lines · Carlos Fernandez Sanz

David,

Apparently not. I've been doing some research and while the driver loads, etc, I get no sound (everything to the max in the mixer, speakers plugged, etc :-)). If I hadn't find anyone else with the exact same problem I would just assume I'm plain stupid (or add item to the list proving it)...

AD1888 is an ac97 codec, so definitely intel8x0 is the right driver.

show /etc/asound.state (after running "alsactl store") and /proc/asound/card0/codec97#0/* files for debugging.

Takashi

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn