Skip to contentSkip to conversation

Help! Low-16 bits of SDRAM can not work!

U-Boot-Users zhao haijian 1 participant 1 message Jun 29, 2005

lore
Share & tools
lore
#0 lore raw

Hi,All

I have been working on such a board we made:

***************************************
CPU: PXA255A
Flash: Intel StrataFlash 16MB x 2
SDRAM: Samsung K4S5616320 32MB x 2
Two 16bits SDRAM chips are connected by the same CE,OE,OW,ADDRESS signals,forming a 32bits-width memory structure.
***************************************

Using a emulator,I see the high 16bits of sdram works well,while the low 16bits always fail,though I've try many combination of configuration. We also found no problem with the hardware by an oscilloscope.

I want to know what could lead to this?
(Maybe a FATAL bit in a mysterious configuration register?) Anybody ever met this?

BTW,I work on the base of CERF250 board.

Best Regards,
Phililp Beijing P.R.China
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050629/37f20e9a/attachment.htm