Skip to contentSkip to conversation

USB HDD boot panic (2.6.31)

DISCUSSION Ben Ryan 3 participants 3 messages Sep 25, 2009 – Sep 27, 2009

lore
Share & tools
lore

Ben Ryan

author
#0 lore raw

I've a question regarding boot from USB-attached IDE HDD under 2.6.31 (slackware/lilo).
Searches haven't shed much light on status or resolutions. Booting from this device throws:

VFS: Cannot open root device "sda1" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions:
.

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown

block(0,)

I notice that there's no /dev/sd(x) devices listed as possible roots in the error.
I've tried a kernel build with all relevant drivers inbuilt (not modules). Tested on multiple machines with same result.
This issue seems to have some history, earlier kernels had patches written for genhd.c (but I lack the skills to port them forward). Discussion here:
http://lkml.indiana.edu/hypermail/linux/kernel/0405.0/0224.html

Quoted 1 line

From what I can gather the USB drivers aren't finished initialising before

the disks are enumerated and mapped to /dev.

Is this a known, current issue?
Does anyone have a patch that can help? If so, why isn't it mainlined? (Please CC responses!)

Thanks
Ben

#1 lore raw
Quoted 23 lines · Ben Ryan

I've a question regarding boot from USB-attached IDE HDD under 2.6.31 (slackware/lilo).
Searches haven't shed much light on status or resolutions. Booting from this device throws:

VFS: Cannot open root device "sda1" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions:
.

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown

block(0,)

I notice that there's no /dev/sd(x) devices listed as possible roots in the error.
I've tried a kernel build with all relevant drivers inbuilt (not modules). Tested on multiple machines with same result.
This issue seems to have some history, earlier kernels had patches written for genhd.c (but I lack the skills to port them forward). Discussion here:
http://lkml.indiana.edu/hypermail/linux/kernel/0405.0/0224.html

Quoted 6 lines

From what I can gather the USB drivers aren't finished initialising before
the disks are enumerated and mapped to /dev.

Is this a known, current issue?
Does anyone have a patch that can help? If so, why isn't it mainlined? (Please CC responses!)

For this sort of setup you really need some sort of initrd that will wait until the devices are detected before trying to mount the root file system, rather than trying to have the kernel mount the root file system on the USB HD directly. The problem is that the USB device detection is asynchronous and the kernel doesn't really know when all possible USB devices have "shown up".

#2 lore raw
In reply to Ben Ryan
Quoted 9 lines · Ben Ryan

I've a question regarding boot from USB-attached IDE HDD under 2.6.31 (slackware/lilo).

From what I can gather the USB drivers aren't finished initialising before the disks are enumerated and mapped to /dev.

Is this a known, current issue?
Does anyone have a patch that can help? If so, why isn't it mainlined? (Please CC responses!)

This is a bit of a known issue, because USB simply doesn't have a way of letting you know when scanning for devices has been completed. Current versions of linux have a simple workaround: add "rootwait" to your kernel command line in LILO.

(from Documentation/kernel-parameters.txt:)
rootwait [KNL] Wait (indefinitely) for root device to show up.
Useful for devices that are detected asynchronously (e.g. USB and MMC devices).

Alternately, you can use an initramfs which is set up to wait for the device to appear. The rootwait option is off by default in order to speed up booting under normal circumstances.

Quoted 2 lines

Thanks
Ben

Signature · 1 line
Calvin Walton <[email protected]>