Skip to contentSkip to conversation

Token Bucket Filter and Dropping

LARTC Piotr Wójcicki 3 participants 4 messages May 8, 2007 – May 9, 2007

lore
Share & tools
lore
#0 lore raw

I am trying to create my own Token Bucket Filter. However, I have a problem with packet dropping.

Scenario :
I got two streams 20KB/s each.
I got one bucket with rate 20KB/s

I put both streams into this bucket.

When buffer is full packets need to be dropped. The problem is that only every other packet needs to be dropped in this scenario. Streams are the same so queue looks like that :

S1 | S2 | S1 | S2

Packets form both streams are one by one.
The result is that all packets from stream S1 are being dropped and all packets from Stream S2 are being sent.
Ideally half of dropped packets would be from S1 and half from S1.

What are possible solutions to this problem ?

Piotr Wojcicki

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

you need hierarchical token bucket for that
have you tried HTB?

Quoted 30 lines · Piotr Wójcicki

I am trying to create my own Token Bucket Filter. However, I have a problem with packet dropping.

Scenario :
I got two streams 20KB/s each.
I got one bucket with rate 20KB/s

I put both streams into this bucket.

When buffer is full packets need to be dropped. The problem is that only every other packet needs to be dropped in this scenario. Streams are the same so queue looks like that :

S1 | S2 | S1 | S2

Packets form both streams are one by one.
The result is that all packets from stream S1 are being dropped and all packets from Stream S2 are being sent.
Ideally half of dropped packets would be from S1 and half from S1.

What are possible solutions to this problem ?

Piotr Wojcicki

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Signature · 5 lines
Marco
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#2 lore raw
In reply to Piotr Wójcicki

I am more like creating my own filter. So separate streams shouldn't be put in one bucket ? But I believe it is possible in htb...

-----Original Message-----
From: Marco Aurelio [mailto:[email protected]]
Sent: Tuesday, May 08, 2007 4:04 PM
To: Piotr Wójcicki; [email protected]
Subject: Re: [LARTC] Token Bucket Filter and Dropping

you need hierarchical token bucket for that
have you tried HTB?

Quoted 1 line · Piotr Wójcicki

I am trying to create my own Token Bucket Filter. However, I have a

problem

Quoted 1 line

with packet dropping.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#3 lore raw
In reply to Piotr Wójcicki

Hi
No need for htb, simple tbf will do.

But if you are creating your own:
As i understand token bucket, you should take each packet from the end of queue in order they are there, i.e S1, S2, S1, S2, not just each other. When the bucket is full, you will drop every packet on input. It is unlikely that you will free space in buffer everytime right when S2 packet comes... You would have buffer full of s2 then, not s1|s2|s1... as you say. Are you sure you are dequeuing from front and doing tail-drop ?

As i understand:
dequeue at constant rate<--que_front_s1,s2,s1,s2,s1,s2_que_tail<--enqueue input or drop

Maybe change in size of token could help mix this... How big is one token now? (i do not know how your tbf is implemented...)Can you give more details ?
By the way: how are you creating those streams, i think it is unusual to see such properly ordered packets of streams in real life ...

If i am completely out, sorry then, just beginner. Best regards (default)

Quoted 23 lines · Piotr Wójcicki

I am trying to create my own Token Bucket Filter. However, I have a problem with packet dropping.

Scenario :
I got two streams 20KB/s each.
I got one bucket with rate 20KB/s

I put both streams into this bucket.

When buffer is full packets need to be dropped. The problem is that only every other packet needs to be dropped in this scenario. Streams are the same so queue looks like that :

S1 | S2 | S1 | S2

Packets form both streams are one by one.
The result is that all packets from stream S1 are being dropped and all packets from Stream S2 are being sent.
Ideally half of dropped packets would be from S1 and half from S1.

What are possible solutions to this problem ?

Quoted 7 lines

Piotr Wojcicki

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc