Skip to contentSkip to conversation

add new irq api to pcie-designware

RFC Superseded Joao Pinto 3 participants 12 messages May 15, 2017 – May 22, 2017

Subsystems (3)
Arm i.MX and Layerscape PCI Arm Samsung Exynos
lore
Share & tools
lore

Joao Pinto

author
#0 lore raw

v2 cover add new irq api to pcie-designware

This patch series adds the new interrupt api to pcie-designware make it possible to use features like MSIX.

The work consisted of adapting the pcie-designware-host and each SoC specific driver.

Joao Pinto (8):
pci: adding new irq api to pci-designware
pci: exynos SoC driver adapted to new irq API
pci: imx6 SoC driver adapted to new irq API
pci: artpec6 SoC driver adapted to new irq API
pci: generic PCIe DW driver adapted to new irq API
pci: qcom SoC driver adapted to new irq API
pci: keystone SoC driver adapted to new irq API
pci: removing old irq api from pcie-designware

 drivers/pci/dwc/pci-exynos.c           |  18 --
 drivers/pci/dwc/pci-imx6.c             |  18 --
 drivers/pci/dwc/pci-keystone-dw.c      |  97 +--------
 drivers/pci/dwc/pci-keystone.c         |   1 +
 drivers/pci/dwc/pci-keystone.h         |   4 +-
 drivers/pci/dwc/pci-layerscape.c       |   4 +-
 drivers/pci/dwc/pcie-artpec6.c         |  18 --
 drivers/pci/dwc/pcie-designware-host.c | 372 ++++++++++++++++++---------------
 drivers/pci/dwc/pcie-designware-plat.c |  15 --
 drivers/pci/dwc/pcie-designware.h      |  18 +-
 drivers/pci/dwc/pcie-qcom.c            |  15 --
 11 files changed, 231 insertions(+), 349 deletions(-)
Signature · 1 line
2.9.3
author
#1 lore raw

RFC v2 1/8 pci: adding new irq api to pci-designware

This patch adds the new interrupt api to pcie-designware, keeping the old one. Although the old API is still available, pcie-designware initiates with the new one.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- Now there's no config to toggle between the 2 APIs, so pcie-designware initiaties wih the new one by default
- Using lower_32_bits / upper_32_bits
- Instead of mutex, now using spinlocks
- Instead of always reading PCIE_MSI_INTR0_ENABLE, now we use an internal variable
- dw_pcie_irq_domain_alloc() was updated to enable Multi-MSI
- using irq_domain_create_linear() instead of irq_domain_add_linear()

 drivers/pci/dwc/pcie-designware-host.c | 272 +++++++++++++++++++++++++++++----
 drivers/pci/dwc/pcie-designware.h      |  15 ++
 2 files changed, 258 insertions(+), 29 deletions(-)
drivers/pci/dwc/pcie-designware-host.c +243 -29
index 28ed32b..78ce002 100644
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>

@@ -53,6 +54,28 @@ static struct irq_chip dw_msi_irq_chip = {
 	.irq_unmask = pci_msi_unmask_irq,
 };
 
+static void dw_msi_mask_irq(struct irq_data *d) {
+	pci_msi_mask_irq(d);
+	irq_chip_mask_parent(d);
+}
+
+static void dw_msi_unmask_irq(struct irq_data *d) {
+	pci_msi_unmask_irq(d);
+	irq_chip_unmask_parent(d);
+}
+
+static struct irq_chip dw_pcie_msi_irq_chip = {
+	.name = "PCI-MSI",
+	.irq_mask = dw_msi_mask_irq,
+	.irq_unmask = dw_msi_unmask_irq,
+};
+
+static struct msi_domain_info dw_pcie_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		     MSI_FLAG_PCI_MSIX),
+	.chip	= &dw_pcie_msi_irq_chip,
+};
+
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {

@@ -81,6 +104,191 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 	return ret;
 }
 
+/* Chained MSI interrupt service routine */
+static void dw_chained_msi_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct pcie_port *pp;
+	struct dw_pcie *pci;
+
+	chained_irq_enter(chip, desc);
+	pci = irq_desc_get_handler_data(desc);
+	pp = &pci->pp;
+
+	dw_handle_msi_irq(pp);
+
+	chained_irq_exit(chip, desc);
+}
+
+static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	u64 msi_target;
+
+	if (pp->ops->get_msi_addr)
+		msi_target = pp->ops->get_msi_addr(pp);
+	else
+		msi_target = virt_to_phys((void *)pp->msi_data);
+
+	msg->address_lo = lower_32_bits(msi_target);
+	msg->address_hi = upper_32_bits(msi_target);
+
+	if (pp->ops->get_msi_data)
+		msg->data = pp->ops->get_msi_data(pp, data->hwirq);
+	else
+		msg->data = data->hwirq;
+
+	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int dw_pci_msi_set_affinity(struct irq_data *irq_data,
+				   const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static void dw_pci_bottom_mask(struct irq_data *data)
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	if (pp->ops->msi_clear_irq)
+		pp->ops->msi_clear_irq(pp, data->hwirq);
+	else {
+		ctrl = data->hwirq / 32;
+		res = ctrl * 12;
+		bit = data->hwirq % 32;
+
+		pp->irq_status[ctrl] &= ~(1 << bit);
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+				    pp->irq_status[ctrl]);
+	}
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static void dw_pci_bottom_unmask(struct irq_data *data)
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	if (pp->ops->msi_set_irq)
+		pp->ops->msi_set_irq(pp, data->hwirq);
+	else {
+		ctrl = data->hwirq / 32;
+		res = ctrl * 12;
+		bit = data->hwirq % 32;
+
+		pp->irq_status[ctrl] |= 1 << bit;
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+				    pp->irq_status[ctrl]);
+	}
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static struct irq_chip dw_pci_msi_bottom_irq_chip = {
+	.name			= "DWPCI-MSI",
+	.irq_compose_msi_msg	= dw_pci_setup_msi_msg,
+	.irq_set_affinity	= dw_pci_msi_set_affinity,
+	.irq_mask		= dw_pci_bottom_mask,
+	.irq_unmask		= dw_pci_bottom_unmask,
+};
+
+static int dw_pcie_irq_domain_alloc(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs,
+				    void *args)
+{
+	struct dw_pcie *pci = domain->host_data;
+	struct pcie_port *pp = &pci->pp;
+	unsigned long flags;
+	unsigned long bit;
+	u32 i;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	bit = bitmap_find_next_zero_area(pp->msi_irq_in_use, pp->num_vectors, 0,
+					 nr_irqs, 0);
+
+	if (bit >= pp->num_vectors) {
+		spin_unlock_irqrestore(&pp->lock, flags);
+		return -ENOSPC;
+	}
+
+	bitmap_set(pp->msi_irq_in_use, bit, nr_irqs);
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_info(domain, virq + i, bit + i,
+				    &dw_pci_msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+
+	return 0;
+}
+
+static void dw_pcie_irq_domain_free(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+	bitmap_clear(pp->msi_irq_in_use, data->hwirq, nr_irqs);
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static const struct irq_domain_ops dw_pcie_msi_domain_ops = {
+	.alloc	= dw_pcie_irq_domain_alloc,
+	.free	= dw_pcie_irq_domain_free,
+};
+
+int dw_pcie_allocate_domains(struct dw_pcie *pci)
+{
+	struct pcie_port *pp = &pci->pp;
+	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
+
+	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
+					       &dw_pcie_msi_domain_ops, pci);
+	if (!pp->irq_domain) {
+		dev_err(pci->dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	pp->msi_domain = pci_msi_create_irq_domain(fwnode,
+						   &dw_pcie_msi_domain_info,
+						   pp->irq_domain);
+	if (!pp->msi_domain) {
+		dev_err(pci->dev, "failed to create MSI domain\n");
+		irq_domain_remove(pp->irq_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void dw_pcie_free_msi(struct pcie_port *pp)
+{
+	irq_set_chained_handler(pp->msi_irq, NULL);
+	irq_set_handler_data(pp->msi_irq, NULL);
+
+	irq_domain_remove(pp->msi_domain);
+	irq_domain_remove(pp->irq_domain);
+}
+
 void dw_pcie_msi_init(struct pcie_port *pp)
 {
 	u64 msi_target;

@@ -97,13 +305,14 @@ void dw_pcie_msi_init(struct pcie_port *pp)
 
 static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 {
-	unsigned int res, bit, val;
+	unsigned int res, bit, ctrl;
 
-	res = (irq / 32) * 12;
+	ctrl = irq / 32;
+	res = ctrl * 12;
 	bit = irq % 32;
-	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-	val &= ~(1 << bit);
-	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+	pp->irq_status[ctrl] &= ~(1 << bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+			    pp->irq_status[ctrl]);
 }
 
 static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,

@@ -125,13 +334,14 @@ static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
 
 static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 {
-	unsigned int res, bit, val;
+	unsigned int res, bit, ctrl;
 
-	res = (irq / 32) * 12;
+	ctrl = irq / 32;
+	res = ctrl * 12;
 	bit = irq % 32;
-	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-	val |= 1 << bit;
-	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+	pp->irq_status[ctrl] |= 1 << bit;
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+			    pp->irq_status[ctrl]);
 }
 
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)

@@ -279,11 +489,14 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
+	struct resource_entry *win, *tmp;
 	struct pci_bus *bus, *child;
 	struct resource *cfg_res;
 	int i, ret;
+
 	LIST_HEAD(res);
-	struct resource_entry *win, *tmp;
+
+	spin_lock_init(&pci->pp.lock);
 
 	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
 	if (cfg_res) {

@@ -378,17 +591,18 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		if (!pp->ops->msi_host_init) {
-			pp->irq_domain = irq_domain_add_linear(dev->of_node,
-						MAX_MSI_IRQS, &msi_domain_ops,
-						&dw_pcie_msi_chip);
-			if (!pp->irq_domain) {
-				dev_err(dev, "irq domain init failed\n");
-				ret = -ENXIO;
+			ret = of_property_read_u32(np, "num-vectors",
+						   &pp->num_vectors);
+			if (ret)
+				pp->num_vectors = 1;
+
+			ret = dw_pcie_allocate_domains(pci);
+			if (ret)
 				goto error;
-			}
 
-			for (i = 0; i < MAX_MSI_IRQS; i++)
-				irq_create_mapping(pp->irq_domain, i);
+			irq_set_chained_handler_and_data(pci->pp.msi_irq,
+							 dw_chained_msi_isr,
+							 pci);
 		} else {
 			ret = pp->ops->msi_host_init(pp, &dw_pcie_msi_chip);
 			if (ret < 0)

@@ -400,14 +614,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		pp->ops->host_init(pp);
 
 	pp->root_bus_nr = pp->busn->start;
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		bus = pci_scan_root_bus_msi(dev, pp->root_bus_nr,
-					    &dw_pcie_ops, pp, &res,
-					    &dw_pcie_msi_chip);
-		dw_pcie_msi_chip.dev = dev;
-	} else
-		bus = pci_scan_root_bus(dev, pp->root_bus_nr, &dw_pcie_ops,
-					pp, &res);
+
+	bus = pci_scan_root_bus(dev, pp->root_bus_nr, &dw_pcie_ops,
+				pp, &res);
 	if (!bus) {
 		ret = -ENOMEM;
 		goto error;

@@ -579,11 +788,16 @@ static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
 
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
-	u32 val;
+	u32 val, ctrl;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 
 	dw_pcie_setup(pci);
 
+	/* Initialize IRQ Status array */
+	for (ctrl = 0; ctrl < MAX_MSI_CTRLS; ctrl++)
+		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + (ctrl * 12), 4,
+				    &pp->irq_status[ctrl]);
+
 	/* setup RC BARs */
 	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0x00000004);
 	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0x00000000);
drivers/pci/dwc/pcie-designware.h +15 -0
index c6a8405..622ffcf 100644
@@ -165,7 +165,11 @@ struct pcie_port {
 	struct dw_pcie_host_ops	*ops;
 	int			msi_irq;
 	struct irq_domain	*irq_domain;
+	struct irq_domain	*msi_domain;
 	unsigned long		msi_data;
+	u32			num_vectors;
+	u32			irq_status[MAX_MSI_CTRLS];
+	spinlock_t		lock;
 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
 };
 

@@ -282,8 +286,10 @@ static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
 void dw_pcie_msi_init(struct pcie_port *pp);
+void dw_pcie_free_msi(struct pcie_port *pp);
 void dw_pcie_setup_rc(struct pcie_port *pp);
 int dw_pcie_host_init(struct pcie_port *pp);
+int dw_pcie_allocate_domains(struct dw_pcie *pci);
 #else
 static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {

@@ -294,6 +300,10 @@ static inline void dw_pcie_msi_init(struct pcie_port *pp)
 {
 }
 
+static inline void dw_pcie_free_msi(struct pcie_port *pp)
+{
+}
+
 static inline void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 }

@@ -302,6 +312,11 @@ static inline int dw_pcie_host_init(struct pcie_port *pp)
 {
 	return 0;
 }
+
+static inline int dw_pcie_allocate_domains(struct dw_pcie *pci)
+{
+	return 0;
+}
 #endif
 
 #ifdef CONFIG_PCIE_DW_EP
Signature · 1 line
2.9.3
#2 lore raw

Re: [RFC v2 1/8] pci: adding new irq api to pci-designware

Quoted 45 lines · Joao Pinto

This patch adds the new interrupt api to pcie-designware, keeping the old one. Although the old API is still available, pcie-designware initiates with the new one.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- Now there's no config to toggle between the 2 APIs, so pcie-designware initiaties wih the new one by default
- Using lower_32_bits / upper_32_bits
- Instead of mutex, now using spinlocks
- Instead of always reading PCIE_MSI_INTR0_ENABLE, now we use an internal variable
- dw_pcie_irq_domain_alloc() was updated to enable Multi-MSI
- using irq_domain_create_linear() instead of irq_domain_add_linear()

 drivers/pci/dwc/pcie-designware-host.c | 272 +++++++++++++++++++++++++++++----
 drivers/pci/dwc/pcie-designware.h      |  15 ++
 2 files changed, 258 insertions(+), 29 deletions(-)
drivers/pci/dwc/pcie-designware-host.c +10 -0
index 28ed32b..78ce002 100644
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>

@@ -53,6 +54,28 @@ static struct irq_chip dw_msi_irq_chip = {
 	.irq_unmask = pci_msi_unmask_irq,
 };
 
+static void dw_msi_mask_irq(struct irq_data *d) {
+	pci_msi_mask_irq(d);
+	irq_chip_mask_parent(d);
+}
+
+static void dw_msi_unmask_irq(struct irq_data *d) {
+	pci_msi_unmask_irq(d);
+	irq_chip_unmask_parent(d);
+}

drivers/pci/dwc/pcie-designware-host.c static struct irq_chip dw_msi_irq_chip = { · line 75

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +10 -0
+
+static struct irq_chip dw_pcie_msi_irq_chip = {
+	.name = "PCI-MSI",
+	.irq_mask = dw_msi_mask_irq,
+	.irq_unmask = dw_msi_unmask_irq,
+};
+
+static struct msi_domain_info dw_pcie_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		     MSI_FLAG_PCI_MSIX),

How is Multi-MSI supported if you don't pass the MSI_FLAG_MULTI_PCI_MSI flag?

Quoted 32 lines
drivers/pci/dwc/pcie-designware-host.c +25 -0
+	.chip	= &dw_pcie_msi_irq_chip,
+};
+
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {

@@ -81,6 +104,191 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 	return ret;
 }
 
+/* Chained MSI interrupt service routine */
+static void dw_chained_msi_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct pcie_port *pp;
+	struct dw_pcie *pci;
+
+	chained_irq_enter(chip, desc);
+	pci = irq_desc_get_handler_data(desc);
+	pp = &pci->pp;
+
+	dw_handle_msi_irq(pp);
+
+	chained_irq_exit(chip, desc);
+}
+
+static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	u64 msi_target;
+

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 138

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +10 -0
+	if (pp->ops->get_msi_addr)
+		msi_target = pp->ops->get_msi_addr(pp);
+	else
+		msi_target = virt_to_phys((void *)pp->msi_data);
+
+	msg->address_lo = lower_32_bits(msi_target);
+	msg->address_hi = upper_32_bits(msi_target);
+
+	if (pp->ops->get_msi_data)
+		msg->data = pp->ops->get_msi_data(pp, data->hwirq);

I've already asked about the reason for this indirection, and I'd appreciate an answer.

Quoted 14 lines
drivers/pci/dwc/pcie-designware-host.c +14 -0
+	else
+		msg->data = data->hwirq;
+
+	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int dw_pci_msi_set_affinity(struct irq_data *irq_data,
+				   const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static void dw_pci_bottom_mask(struct irq_data *data)

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 162

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +10 -0
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	if (pp->ops->msi_clear_irq)
+		pp->ops->msi_clear_irq(pp, data->hwirq);

Same thing. If you have to have that kind of indirection, then this is a different irqchip altogether. Also, see below for the coding-style.

Quoted 15 lines
drivers/pci/dwc/pcie-designware-host.c +15 -0
+	else {
+		ctrl = data->hwirq / 32;
+		res = ctrl * 12;
+		bit = data->hwirq % 32;
+
+		pp->irq_status[ctrl] &= ~(1 << bit);
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+				    pp->irq_status[ctrl]);
+	}
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static void dw_pci_bottom_unmask(struct irq_data *data)
+{

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 187

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +10 -0
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	if (pp->ops->msi_set_irq)
+		pp->ops->msi_set_irq(pp, data->hwirq);
+	else {

Coding-style:

        if (...) {
        	...
        } else {
Quoted 41 lines
drivers/pci/dwc/pcie-designware-host.c +41 -0
+		ctrl = data->hwirq / 32;
+		res = ctrl * 12;
+		bit = data->hwirq % 32;
+
+		pp->irq_status[ctrl] |= 1 << bit;
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+				    pp->irq_status[ctrl]);
+	}
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static struct irq_chip dw_pci_msi_bottom_irq_chip = {
+	.name			= "DWPCI-MSI",
+	.irq_compose_msi_msg	= dw_pci_setup_msi_msg,
+	.irq_set_affinity	= dw_pci_msi_set_affinity,
+	.irq_mask		= dw_pci_bottom_mask,
+	.irq_unmask		= dw_pci_bottom_unmask,
+};
+
+static int dw_pcie_irq_domain_alloc(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs,
+				    void *args)
+{
+	struct dw_pcie *pci = domain->host_data;
+	struct pcie_port *pp = &pci->pp;
+	unsigned long flags;
+	unsigned long bit;
+	u32 i;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	bit = bitmap_find_next_zero_area(pp->msi_irq_in_use, pp->num_vectors, 0,
+					 nr_irqs, 0);
+
+	if (bit >= pp->num_vectors) {
+		spin_unlock_irqrestore(&pp->lock, flags);
+		return -ENOSPC;
+	}
+
+	bitmap_set(pp->msi_irq_in_use, bit, nr_irqs);

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 238

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +10 -0
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_info(domain, virq + i, bit + i,
+				    &dw_pci_msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+
+	return 0;

How does this work when you're using the indirection I've moaned about earlier? How can you guarantee that there are similar number of available vectors?

Quoted 116 lines
drivers/pci/dwc/pcie-designware-host.c +69 -11
+}
+
+static void dw_pcie_irq_domain_free(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+	bitmap_clear(pp->msi_irq_in_use, data->hwirq, nr_irqs);
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static const struct irq_domain_ops dw_pcie_msi_domain_ops = {
+	.alloc	= dw_pcie_irq_domain_alloc,
+	.free	= dw_pcie_irq_domain_free,
+};
+
+int dw_pcie_allocate_domains(struct dw_pcie *pci)
+{
+	struct pcie_port *pp = &pci->pp;
+	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
+
+	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
+					       &dw_pcie_msi_domain_ops, pci);
+	if (!pp->irq_domain) {
+		dev_err(pci->dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	pp->msi_domain = pci_msi_create_irq_domain(fwnode,
+						   &dw_pcie_msi_domain_info,
+						   pp->irq_domain);
+	if (!pp->msi_domain) {
+		dev_err(pci->dev, "failed to create MSI domain\n");
+		irq_domain_remove(pp->irq_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void dw_pcie_free_msi(struct pcie_port *pp)
+{
+	irq_set_chained_handler(pp->msi_irq, NULL);
+	irq_set_handler_data(pp->msi_irq, NULL);
+
+	irq_domain_remove(pp->msi_domain);
+	irq_domain_remove(pp->irq_domain);
+}
+
 void dw_pcie_msi_init(struct pcie_port *pp)
 {
 	u64 msi_target;

@@ -97,13 +305,14 @@ void dw_pcie_msi_init(struct pcie_port *pp)
 
 static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 {
-	unsigned int res, bit, val;
+	unsigned int res, bit, ctrl;
 
-	res = (irq / 32) * 12;
+	ctrl = irq / 32;
+	res = ctrl * 12;
 	bit = irq % 32;
-	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-	val &= ~(1 << bit);
-	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+	pp->irq_status[ctrl] &= ~(1 << bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+			    pp->irq_status[ctrl]);
 }
 
 static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,

@@ -125,13 +334,14 @@ static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
 
 static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 {
-	unsigned int res, bit, val;
+	unsigned int res, bit, ctrl;
 
-	res = (irq / 32) * 12;
+	ctrl = irq / 32;
+	res = ctrl * 12;
 	bit = irq % 32;
-	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-	val |= 1 << bit;
-	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+	pp->irq_status[ctrl] |= 1 << bit;
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+			    pp->irq_status[ctrl]);
 }
 
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)

@@ -279,11 +489,14 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
+	struct resource_entry *win, *tmp;
 	struct pci_bus *bus, *child;
 	struct resource *cfg_res;
 	int i, ret;
+
 	LIST_HEAD(res);
-	struct resource_entry *win, *tmp;
+
+	spin_lock_init(&pci->pp.lock);
 
 	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
 	if (cfg_res) {

@@ -378,17 +591,18 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		if (!pp->ops->msi_host_init) {

drivers/pci/dwc/pcie-designware-host.c int dw_pcie_host_init(struct pcie_port *pp) · line 597

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +4 -6
-			pp->irq_domain = irq_domain_add_linear(dev->of_node,
-						MAX_MSI_IRQS, &msi_domain_ops,
-						&dw_pcie_msi_chip);
-			if (!pp->irq_domain) {
-				dev_err(dev, "irq domain init failed\n");
-				ret = -ENXIO;
+			ret = of_property_read_u32(np, "num-vectors",
+						   &pp->num_vectors);
+			if (ret)
+				pp->num_vectors = 1;

1? As in "one bit only"? Is that a valid configuration? Also, all of this code seems to assume a maximum number of 32 MSIs. Is that a real limitation? Because if that's the case, you can drop all the stuff about ctrl and the '* 12' offset all over the code.

Thanks,

	M.
Signature · 1 line
Jazz is not dead. It just smells funny.
author
#3 lore raw

Re: [RFC v2 1/8] pci: adding new irq api to pci-designware

Hi Mark,

Às 9:44 AM de 5/21/2017, Marc Zyngier escreveu:

Quoted 51 lines · Joao Pinto
Quoted 50 lines

This patch adds the new interrupt api to pcie-designware, keeping the old one. Although the old API is still available, pcie-designware initiates with the new one.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- Now there's no config to toggle between the 2 APIs, so pcie-designware initiaties wih the new one by default
- Using lower_32_bits / upper_32_bits
- Instead of mutex, now using spinlocks
- Instead of always reading PCIE_MSI_INTR0_ENABLE, now we use an internal variable
- dw_pcie_irq_domain_alloc() was updated to enable Multi-MSI
- using irq_domain_create_linear() instead of irq_domain_add_linear()

 drivers/pci/dwc/pcie-designware-host.c | 272 +++++++++++++++++++++++++++++----
 drivers/pci/dwc/pcie-designware.h      |  15 ++
 2 files changed, 258 insertions(+), 29 deletions(-)
drivers/pci/dwc/pcie-designware-host.c +15 -0
index 28ed32b..78ce002 100644
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>

@@ -53,6 +54,28 @@ static struct irq_chip dw_msi_irq_chip = {
 	.irq_unmask = pci_msi_unmask_irq,
 };
 
+static void dw_msi_mask_irq(struct irq_data *d) {
+	pci_msi_mask_irq(d);
+	irq_chip_mask_parent(d);
+}
+
+static void dw_msi_unmask_irq(struct irq_data *d) {
+	pci_msi_unmask_irq(d);
+	irq_chip_unmask_parent(d);
+}
+
+static struct irq_chip dw_pcie_msi_irq_chip = {
+	.name = "PCI-MSI",
+	.irq_mask = dw_msi_mask_irq,
+	.irq_unmask = dw_msi_unmask_irq,
Quoted 8 lines

drivers/pci/dwc/pcie-designware-host.c static struct irq_chip dw_msi_irq_chip = { · line 75

Quoted 5 lines
drivers/pci/dwc/pcie-designware-host.c +5 -0
+};
+
+static struct msi_domain_info dw_pcie_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		     MSI_FLAG_PCI_MSIX),

How is Multi-MSI supported if you don't pass the MSI_FLAG_MULTI_PCI_MSI flag?

Well spoted, it was lost in the merge.

Quoted 38 lines
Quoted 38 lines
drivers/pci/dwc/pcie-designware-host.c +30 -0
+	.chip	= &dw_pcie_msi_irq_chip,
+};
+
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {

@@ -81,6 +104,191 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 	return ret;
 }
 
+/* Chained MSI interrupt service routine */
+static void dw_chained_msi_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct pcie_port *pp;
+	struct dw_pcie *pci;
+
+	chained_irq_enter(chip, desc);
+	pci = irq_desc_get_handler_data(desc);
+	pp = &pci->pp;
+
+	dw_handle_msi_irq(pp);
+
+	chained_irq_exit(chip, desc);
+}
+
+static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	u64 msi_target;
+
+	if (pp->ops->get_msi_addr)
+		msi_target = pp->ops->get_msi_addr(pp);
+	else
+		msi_target = virt_to_phys((void *)pp->msi_data);
+
Quoted 8 lines

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 138

Quoted 5 lines
drivers/pci/dwc/pcie-designware-host.c +5 -0
+	msg->address_lo = lower_32_bits(msi_target);
+	msg->address_hi = upper_32_bits(msi_target);
+
+	if (pp->ops->get_msi_data)
+		msg->data = pp->ops->get_msi_data(pp, data->hwirq);

I've already asked about the reason for this indirection, and I'd appreciate an answer.

I answered in a previous e-mail. There are some SoCs using Synopsys PCIe Core that have a custom way of managing some operations, like the msi_data, msi_addrr, the mask/unmask of interrupts, etc. That is the reason why we have these callbacks. An SoC specific driver fills their callbacks, call the pcie-designware functions that they need and initialize their IP. There is a group of drivers that are standard, like the pcie-designware-plat, exynos, qcom, artpec6, imx6, etc.

Quoted 20 lines
Quoted 20 lines
drivers/pci/dwc/pcie-designware-host.c +19 -0
+	else
+		msg->data = data->hwirq;
+
+	dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
+		(int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int dw_pci_msi_set_affinity(struct irq_data *irq_data,
+				   const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static void dw_pci_bottom_mask(struct irq_data *data)
+{
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
Quoted 8 lines

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 162

Quoted 5 lines
drivers/pci/dwc/pcie-designware-host.c +5 -0
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	if (pp->ops->msi_clear_irq)
+		pp->ops->msi_clear_irq(pp, data->hwirq);

Same thing. If you have to have that kind of indirection, then this is a different irqchip altogether. Also, see below for the coding-style.

We can have a different irqchip for each SoC specifc driver that needs it, but the change would be bigger. I suggest that we keep the current method and get every driver working properly using the new API and after that I can make a second round of patches targetting these callbacks. What do you think?

Quoted 33 lines
Quoted 16 lines
drivers/pci/dwc/pcie-designware-host.c +15 -0
+	else {
+		ctrl = data->hwirq / 32;
+		res = ctrl * 12;
+		bit = data->hwirq % 32;
+
+		pp->irq_status[ctrl] &= ~(1 << bit);
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+				    pp->irq_status[ctrl]);
+	}
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static void dw_pci_bottom_unmask(struct irq_data *data)
+{

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 187

Quoted 10 lines
drivers/pci/dwc/pcie-designware-host.c +10 -0
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	if (pp->ops->msi_set_irq)
+		pp->ops->msi_set_irq(pp, data->hwirq);
+	else {

Coding-style:

        if (...) {
        	...
        } else {
Quoted 8 lines

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 195

Quoted 8 lines
drivers/pci/dwc/pcie-designware-host.c +8 -0
+		ctrl = data->hwirq / 32;
+		res = ctrl * 12;
+		bit = data->hwirq % 32;
+
+		pp->irq_status[ctrl] |= 1 << bit;
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+				    pp->irq_status[ctrl]);
+	}

Yes correct. I did not run the checkpatch, because I was more worried about the functionality. I will run it next patch version.

Quoted 39 lines
Quoted 39 lines
drivers/pci/dwc/pcie-designware-host.c +39 -0
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static struct irq_chip dw_pci_msi_bottom_irq_chip = {
+	.name			= "DWPCI-MSI",
+	.irq_compose_msi_msg	= dw_pci_setup_msi_msg,
+	.irq_set_affinity	= dw_pci_msi_set_affinity,
+	.irq_mask		= dw_pci_bottom_mask,
+	.irq_unmask		= dw_pci_bottom_unmask,
+};
+
+static int dw_pcie_irq_domain_alloc(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs,
+				    void *args)
+{
+	struct dw_pcie *pci = domain->host_data;
+	struct pcie_port *pp = &pci->pp;
+	unsigned long flags;
+	unsigned long bit;
+	u32 i;
+
+	spin_lock_irqsave(&pp->lock, flags);
+
+	bit = bitmap_find_next_zero_area(pp->msi_irq_in_use, pp->num_vectors, 0,
+					 nr_irqs, 0);
+
+	if (bit >= pp->num_vectors) {
+		spin_unlock_irqrestore(&pp->lock, flags);
+		return -ENOSPC;
+	}
+
+	bitmap_set(pp->msi_irq_in_use, bit, nr_irqs);
+
+	spin_unlock_irqrestore(&pp->lock, flags);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_info(domain, virq + i, bit + i,
+				    &dw_pci_msi_bottom_irq_chip,
Quoted 8 lines

drivers/pci/dwc/pcie-designware-host.c irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) · line 238

Quoted 4 lines
drivers/pci/dwc/pcie-designware-host.c +4 -0
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
+
+	return 0;

How does this work when you're using the indirection I've moaned about earlier? How can you guarantee that there are similar number of available vectors?

With MSI_FLAG_MULTI_PCI_MSI, this approach would work properly correct?

Quoted 124 lines
Quoted 124 lines
drivers/pci/dwc/pcie-designware-host.c +70 -17
+}
+
+static void dw_pcie_irq_domain_free(struct irq_domain *domain,
+				    unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+	struct dw_pcie *pci = irq_data_get_irq_chip_data(data);
+	struct pcie_port *pp = &pci->pp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pp->lock, flags);
+	bitmap_clear(pp->msi_irq_in_use, data->hwirq, nr_irqs);
+	spin_unlock_irqrestore(&pp->lock, flags);
+}
+
+static const struct irq_domain_ops dw_pcie_msi_domain_ops = {
+	.alloc	= dw_pcie_irq_domain_alloc,
+	.free	= dw_pcie_irq_domain_free,
+};
+
+int dw_pcie_allocate_domains(struct dw_pcie *pci)
+{
+	struct pcie_port *pp = &pci->pp;
+	struct fwnode_handle *fwnode = of_node_to_fwnode(pci->dev->of_node);
+
+	pp->irq_domain = irq_domain_create_linear(fwnode, pp->num_vectors,
+					       &dw_pcie_msi_domain_ops, pci);
+	if (!pp->irq_domain) {
+		dev_err(pci->dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	pp->msi_domain = pci_msi_create_irq_domain(fwnode,
+						   &dw_pcie_msi_domain_info,
+						   pp->irq_domain);
+	if (!pp->msi_domain) {
+		dev_err(pci->dev, "failed to create MSI domain\n");
+		irq_domain_remove(pp->irq_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void dw_pcie_free_msi(struct pcie_port *pp)
+{
+	irq_set_chained_handler(pp->msi_irq, NULL);
+	irq_set_handler_data(pp->msi_irq, NULL);
+
+	irq_domain_remove(pp->msi_domain);
+	irq_domain_remove(pp->irq_domain);
+}
+
 void dw_pcie_msi_init(struct pcie_port *pp)
 {
 	u64 msi_target;

@@ -97,13 +305,14 @@ void dw_pcie_msi_init(struct pcie_port *pp)
 
 static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 {
-	unsigned int res, bit, val;
+	unsigned int res, bit, ctrl;
 
-	res = (irq / 32) * 12;
+	ctrl = irq / 32;
+	res = ctrl * 12;
 	bit = irq % 32;
-	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-	val &= ~(1 << bit);
-	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+	pp->irq_status[ctrl] &= ~(1 << bit);
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+			    pp->irq_status[ctrl]);
 }
 
 static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,

@@ -125,13 +334,14 @@ static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
 
 static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 {
-	unsigned int res, bit, val;
+	unsigned int res, bit, ctrl;
 
-	res = (irq / 32) * 12;
+	ctrl = irq / 32;
+	res = ctrl * 12;
 	bit = irq % 32;
-	dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
-	val |= 1 << bit;
-	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+	pp->irq_status[ctrl] |= 1 << bit;
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
+			    pp->irq_status[ctrl]);
 }
 
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)

@@ -279,11 +489,14 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
+	struct resource_entry *win, *tmp;
 	struct pci_bus *bus, *child;
 	struct resource *cfg_res;
 	int i, ret;
+
 	LIST_HEAD(res);
-	struct resource_entry *win, *tmp;
+
+	spin_lock_init(&pci->pp.lock);
 
 	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
 	if (cfg_res) {

@@ -378,17 +591,18 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		if (!pp->ops->msi_host_init) {
-			pp->irq_domain = irq_domain_add_linear(dev->of_node,
-						MAX_MSI_IRQS, &msi_domain_ops,
-						&dw_pcie_msi_chip);
-			if (!pp->irq_domain) {
-				dev_err(dev, "irq domain init failed\n");
-				ret = -ENXIO;
+			ret = of_property_read_u32(np, "num-vectors",
Quoted 8 lines

drivers/pci/dwc/pcie-designware-host.c int dw_pcie_host_init(struct pcie_port *pp) · line 597

Quoted 3 lines
drivers/pci/dwc/pcie-designware-host.c +3 -0
+						   &pp->num_vectors);
+			if (ret)
+				pp->num_vectors = 1;

1? As in "one bit only"? Is that a valid configuration? Also, all of this code seems to assume a maximum number of 32 MSIs. Is that a real limitation? Because if that's the case, you can drop all the stuff about ctrl and the '* 12' offset all over the code.

The IP is capable of handling 256, distributed by 8 registers of 32-bit (shifted by 12). For now the driver is hardcoded to handle 32 and so you have ctrl = 1 (1 register).

Quoted 5 lines

Thanks,

	M.

Thanks,
Joao

author
#4 lore raw

RFC v2 2/8 pci: exynos SoC driver adapted to new irq API

In reply to Joao Pinto

This patch adapts Exynos SoC specific driver to use the new interrupt api available in pcie-designware.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pci-exynos.c | 18 ------------------
 1 file changed, 18 deletions(-)
drivers/pci/dwc/pci-exynos.c +0 -18
index 546082a..e49c39a 100644
@@ -490,15 +490,6 @@ static irqreturn_t exynos_pcie_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t exynos_pcie_msi_irq_handler(int irq, void *arg)
-{
-	struct exynos_pcie *ep = arg;
-	struct dw_pcie *pci = ep->pci;
-	struct pcie_port *pp = &pci->pp;
-
-	return dw_handle_msi_irq(pp);
-}
-
 static void exynos_pcie_msi_init(struct exynos_pcie *ep)
 {
 	struct dw_pcie *pci = ep->pci;

@@ -622,15 +613,6 @@ static int __init exynos_add_pcie_port(struct exynos_pcie *ep,
 			dev_err(dev, "failed to get msi irq\n");
 			return -ENODEV;
 		}
-
-		ret = devm_request_irq(dev, pp->msi_irq,
-					exynos_pcie_msi_irq_handler,
-					IRQF_SHARED | IRQF_NO_THREAD,
-					"exynos-pcie", ep);
-		if (ret) {
-			dev_err(dev, "failed to request msi irq\n");
-			return ret;
-		}
 	}
 
 	pp->root_bus_nr = -1;
Signature · 1 line
2.9.3
Acked-by on v2 2/8
#5 lore raw

Re: [RFC v2 2/8] pci: exynos SoC driver adapted to new irq API

Quoted 5 lines · Joao Pinto

This patch adapts Exynos SoC specific driver to use the new interrupt api available in pcie-designware.

Signed-off-by Joao Pinto <[email protected]>
Acked-by Jingoo Han <[email protected]>

Best regards,
Jingoo Han

Quoted 47 lines

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pci-exynos.c | 18 ------------------
 1 file changed, 18 deletions(-)
drivers/pci/dwc/pci-exynos.c +0 -9
index 546082a..e49c39a 100644
@@ -490,15 +490,6 @@ static irqreturn_t exynos_pcie_irq_handler(int irq,
 void *arg)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t exynos_pcie_msi_irq_handler(int irq, void *arg)
-{
-	struct exynos_pcie *ep = arg;
-	struct dw_pcie *pci = ep->pci;
-	struct pcie_port *pp = &pci->pp;
-
-	return dw_handle_msi_irq(pp);
-}
-
 static void exynos_pcie_msi_init(struct exynos_pcie *ep)
 {
drivers/pci/dwc/pci-exynos.c +0 -9
 	struct dw_pcie *pci = ep->pci;

@@ -622,15 +613,6 @@ static int __init exynos_add_pcie_port(struct
 exynos_pcie *ep,
 			dev_err(dev, "failed to get msi irq\n");
 			return -ENODEV;
 		}
-
-		ret = devm_request_irq(dev, pp->msi_irq,
-					exynos_pcie_msi_irq_handler,
-					IRQF_SHARED | IRQF_NO_THREAD,
-					"exynos-pcie", ep);
-		if (ret) {
-			dev_err(dev, "failed to request msi irq\n");
-			return ret;
-		}
 	}

pp->root_bus_nr = -1;
--
2.9.3

author
#6 lore raw

RFC v2 3/8 pci: imx6 SoC driver adapted to new irq API

In reply to Joao Pinto

This patch adapts imx6 SoC specific driver to use the new interrupt api available in pcie-designware.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pci-imx6.c | 18 ------------------
 1 file changed, 18 deletions(-)
drivers/pci/dwc/pci-imx6.c +0 -18
index a98cba5..f22ce1f 100644
@@ -490,15 +490,6 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 	return -EINVAL;
 }
 
-static irqreturn_t imx6_pcie_msi_handler(int irq, void *arg)
-{
-	struct imx6_pcie *imx6_pcie = arg;
-	struct dw_pcie *pci = imx6_pcie->pci;
-	struct pcie_port *pp = &pci->pp;
-
-	return dw_handle_msi_irq(pp);
-}
-
 static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;

@@ -620,15 +611,6 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 			dev_err(dev, "failed to get MSI irq\n");
 			return -ENODEV;
 		}
-
-		ret = devm_request_irq(dev, pp->msi_irq,
-				       imx6_pcie_msi_handler,
-				       IRQF_SHARED | IRQF_NO_THREAD,
-				       "mx6-pcie-msi", imx6_pcie);
-		if (ret) {
-			dev_err(dev, "failed to request MSI irq\n");
-			return ret;
-		}
 	}
 
 	pp->root_bus_nr = -1;
Signature · 1 line
2.9.3
author
#7 lore raw

RFC v2 4/8 pci: artpec6 SoC driver adapted to new irq API

In reply to Joao Pinto

This patch adapts artpec6 SoC specific driver to use the new interrupt api available in pcie-designware.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pcie-artpec6.c | 18 ------------------
 1 file changed, 18 deletions(-)
drivers/pci/dwc/pcie-artpec6.c +0 -18
index 82a04ac..d81789b 100644
@@ -188,15 +188,6 @@ static struct dw_pcie_host_ops artpec6_pcie_host_ops = {
 	.host_init = artpec6_pcie_host_init,
 };
 
-static irqreturn_t artpec6_pcie_msi_handler(int irq, void *arg)
-{
-	struct artpec6_pcie *artpec6_pcie = arg;
-	struct dw_pcie *pci = artpec6_pcie->pci;
-	struct pcie_port *pp = &pci->pp;
-
-	return dw_handle_msi_irq(pp);
-}
-
 static int artpec6_add_pcie_port(struct artpec6_pcie *artpec6_pcie,
 				 struct platform_device *pdev)
 {

@@ -211,15 +202,6 @@ static int artpec6_add_pcie_port(struct artpec6_pcie *artpec6_pcie,
 			dev_err(dev, "failed to get MSI irq\n");
 			return -ENODEV;
 		}
-
-		ret = devm_request_irq(dev, pp->msi_irq,
-				       artpec6_pcie_msi_handler,
-				       IRQF_SHARED | IRQF_NO_THREAD,
-				       "artpec6-pcie-msi", artpec6_pcie);
-		if (ret) {
-			dev_err(dev, "failed to request MSI irq\n");
-			return ret;
-		}
 	}
 
 	pp->root_bus_nr = -1;
Signature · 1 line
2.9.3
author
#8 lore raw

RFC v2 5/8 pci: generic PCIe DW driver adapted to new irq API

In reply to Joao Pinto

This patch adapts the generic PCIe DW driver to use the new interrupt api available in pcie-designware.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pcie-designware-plat.c | 15 ---------------
 1 file changed, 15 deletions(-)
drivers/pci/dwc/pcie-designware-plat.c +0 -15
index 32091b3..3b9717b 100644
@@ -28,13 +28,6 @@ struct dw_plat_pcie {
 	struct dw_pcie		*pci;
 };
 
-static irqreturn_t dw_plat_pcie_msi_irq_handler(int irq, void *arg)
-{
-	struct pcie_port *pp = arg;
-
-	return dw_handle_msi_irq(pp);
-}
-
 static void dw_plat_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);

@@ -64,14 +57,6 @@ static int dw_plat_add_pcie_port(struct pcie_port *pp,
 		pp->msi_irq = platform_get_irq(pdev, 0);
 		if (pp->msi_irq < 0)
 			return pp->msi_irq;
-
-		ret = devm_request_irq(dev, pp->msi_irq,
-					dw_plat_pcie_msi_irq_handler,
-					IRQF_SHARED, "dw-plat-pcie-msi", pp);
-		if (ret) {
-			dev_err(dev, "failed to request MSI IRQ\n");
-			return ret;
-		}
 	}
 
 	pp->root_bus_nr = -1;
Signature · 1 line
2.9.3
author
#9 lore raw

RFC v2 6/8 pci: qcom SoC driver adapted to new irq API

In reply to Joao Pinto

This patch adapts Qcom SoC specific driver to use the new interrupt api available in pcie-designware.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pcie-qcom.c | 15 ---------------
 1 file changed, 15 deletions(-)
drivers/pci/dwc/pcie-qcom.c +0 -15
index 5bf23d4..4e1cc02 100644
@@ -126,13 +126,6 @@ static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
 	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
 }
 
-static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
-{
-	struct pcie_port *pp = arg;
-
-	return dw_handle_msi_irq(pp);
-}
-
 static void qcom_pcie_v0_v1_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;

@@ -724,14 +717,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
 		if (pp->msi_irq < 0)
 			return pp->msi_irq;
-
-		ret = devm_request_irq(dev, pp->msi_irq,
-				       qcom_pcie_msi_irq_handler,
-				       IRQF_SHARED, "qcom-pcie-msi", pp);
-		if (ret) {
-			dev_err(dev, "cannot request msi irq\n");
-			return ret;
-		}
 	}
 
 	ret = phy_init(pcie->phy);
Signature · 1 line
2.9.3
author
#10 lore raw

RFC v2 7/8 pci: keystone SoC driver adapted to new irq API

In reply to Joao Pinto

This patch adapts Keystone SoC specific driver to use the new interrupt api available in pcie-designware. A new callback was added to dw_pcie_host_ops to handle a specific Keystone function and msi_host_init callback is changed to simplify the access to pci data structure for keystone all SoC drivers that use the structure.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- just to keep up patch set version

 drivers/pci/dwc/pci-keystone-dw.c      | 97 +++-------------------------------
 drivers/pci/dwc/pci-keystone.c         |  1 +
 drivers/pci/dwc/pci-keystone.h         |  4 +-
 drivers/pci/dwc/pci-layerscape.c       |  3 +-
 drivers/pci/dwc/pcie-designware-host.c | 12 ++++-
 drivers/pci/dwc/pcie-designware.h      |  3 +-
 6 files changed, 23 insertions(+), 97 deletions(-)
drivers/pci/dwc/pci-keystone-dw.c +6 -91
index 8bc626e..da1472e 100644
@@ -124,19 +124,15 @@ void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
 	}
 }
 
-static void ks_dw_pcie_msi_irq_ack(struct irq_data *d)
+void ks_dw_pcie_msi_irq_ack(int irq, struct pcie_port *pp)
 {
 	u32 offset, reg_offset, bit_pos;
 	struct keystone_pcie *ks_pcie;
-	struct msi_desc *msi;
-	struct pcie_port *pp;
 	struct dw_pcie *pci;
 
-	msi = irq_data_get_msi_desc(d);
-	pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi);
 	pci = to_dw_pcie_from_pp(pp);
 	ks_pcie = to_keystone_pcie(pci);
-	offset = d->irq - irq_linear_revmap(pp->irq_domain, 0);
+	offset = irq - irq_linear_revmap(pp->irq_domain, 0);
 	update_reg_offset_bit_pos(offset, &reg_offset, &bit_pos);
 
 	ks_dw_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4),

@@ -166,93 +162,12 @@ void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 			 BIT(bit_pos));
 }
 
-static void ks_dw_pcie_msi_irq_mask(struct irq_data *d)
+int ks_dw_pcie_msi_host_init(struct dw_pcie *pci, struct msi_controller *chip)
 {
-	struct keystone_pcie *ks_pcie;
-	struct msi_desc *msi;
-	struct pcie_port *pp;
-	struct dw_pcie *pci;
-	u32 offset;
-
-	msi = irq_data_get_msi_desc(d);
-	pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi);
-	pci = to_dw_pcie_from_pp(pp);
-	ks_pcie = to_keystone_pcie(pci);
-	offset = d->irq - irq_linear_revmap(pp->irq_domain, 0);
-
-	/* Mask the end point if PVM implemented */
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		if (msi->msi_attrib.maskbit)
-			pci_msi_mask_irq(d);
-	}
-
-	ks_dw_pcie_msi_clear_irq(pp, offset);
-}
-
-static void ks_dw_pcie_msi_irq_unmask(struct irq_data *d)
-{
-	struct keystone_pcie *ks_pcie;
-	struct msi_desc *msi;
-	struct pcie_port *pp;
-	struct dw_pcie *pci;
-	u32 offset;
-
-	msi = irq_data_get_msi_desc(d);
-	pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi);
-	pci = to_dw_pcie_from_pp(pp);
-	ks_pcie = to_keystone_pcie(pci);
-	offset = d->irq - irq_linear_revmap(pp->irq_domain, 0);
-
-	/* Mask the end point if PVM implemented */
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		if (msi->msi_attrib.maskbit)
-			pci_msi_unmask_irq(d);
-	}
-
-	ks_dw_pcie_msi_set_irq(pp, offset);
-}
+	/* overide number of vectors and sent them to Keystone Max MSI IRQs */
+	pci->pp.num_vectors = MAX_MSI_IRQS;
 
-static struct irq_chip ks_dw_pcie_msi_irq_chip = {
-	.name = "Keystone-PCIe-MSI-IRQ",
-	.irq_ack = ks_dw_pcie_msi_irq_ack,
-	.irq_mask = ks_dw_pcie_msi_irq_mask,
-	.irq_unmask = ks_dw_pcie_msi_irq_unmask,
-};
-
-static int ks_dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
-			      irq_hw_number_t hwirq)
-{
-	irq_set_chip_and_handler(irq, &ks_dw_pcie_msi_irq_chip,
-				 handle_level_irq);
-	irq_set_chip_data(irq, domain->host_data);
-
-	return 0;
-}
-
-static const struct irq_domain_ops ks_dw_pcie_msi_domain_ops = {
-	.map = ks_dw_pcie_msi_map,
-};
-
-int ks_dw_pcie_msi_host_init(struct pcie_port *pp, struct msi_controller *chip)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-	struct device *dev = pci->dev;
-	int i;
-
-	pp->irq_domain = irq_domain_add_linear(ks_pcie->msi_intc_np,
-					MAX_MSI_IRQS,
-					&ks_dw_pcie_msi_domain_ops,
-					chip);
-	if (!pp->irq_domain) {
-		dev_err(dev, "irq domain init failed\n");
-		return -ENXIO;
-	}
-
-	for (i = 0; i < MAX_MSI_IRQS; i++)
-		irq_create_mapping(pp->irq_domain, i);
-
-	return 0;
+	return dw_pcie_allocate_domains(pci);
 }
 
 void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
drivers/pci/dwc/pci-keystone.c +1 -0
index fcc9723..a59bd9b 100644
@@ -299,6 +299,7 @@ static struct dw_pcie_host_ops keystone_pcie_host_ops = {
 	.msi_clear_irq = ks_dw_pcie_msi_clear_irq,
 	.get_msi_addr = ks_dw_pcie_get_msi_addr,
 	.msi_host_init = ks_dw_pcie_msi_host_init,
+	.msi_irq_ack = ks_dw_pcie_msi_irq_ack,
 	.scan_bus = ks_dw_pcie_v3_65_scan_bus,
 };
drivers/pci/dwc/pci-keystone.h +2 -2
index 74c5825..83179382 100644
@@ -55,9 +55,9 @@ int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 		unsigned int devfn, int where, int size, u32 *val);
 void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie);
 void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie);
+void ks_dw_pcie_msi_irq_ack(int i, struct pcie_port *pp);
 void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq);
 void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq);
 void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp);
-int ks_dw_pcie_msi_host_init(struct pcie_port *pp,
-		struct msi_controller *chip);
+int ks_dw_pcie_msi_host_init(struct dw_pcie *pci, struct msi_controller *chip);
 int ks_dw_pcie_link_up(struct dw_pcie *pci);
drivers/pci/dwc/pci-layerscape.c +1 -2
index 27d638c..4fb491b 100644
@@ -162,10 +162,9 @@ static void ls_pcie_host_init(struct pcie_port *pp)
 	iowrite32(0, pci->dbi_base + PCIE_DBI_RO_WR_EN);
 }
 
-static int ls_pcie_msi_host_init(struct pcie_port *pp,
+static int ls_pcie_msi_host_init(struct dw_pcie *pci,
 				 struct msi_controller *chip)
 {
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 	struct device_node *msi_node;
drivers/pci/dwc/pcie-designware-host.c +11 -1
index 78ce002..f1743cb 100644
@@ -197,8 +197,18 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
 	spin_unlock_irqrestore(&pp->lock, flags);
 }
 
+static void dw_pci_bottom_ack(struct irq_data *d)
+{
+	struct msi_desc *msi = irq_data_get_msi_desc(d);
+	struct pcie_port *pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi);
+
+	if (pp->ops->msi_irq_ack)
+		pp->ops->msi_irq_ack(d->irq, pp);
+}
+
 static struct irq_chip dw_pci_msi_bottom_irq_chip = {
 	.name			= "DWPCI-MSI",
+	.irq_ack		= dw_pci_bottom_ack,
 	.irq_compose_msi_msg	= dw_pci_setup_msi_msg,
 	.irq_set_affinity	= dw_pci_msi_set_affinity,
 	.irq_mask		= dw_pci_bottom_mask,

@@ -604,7 +614,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 							 dw_chained_msi_isr,
 							 pci);
 		} else {
-			ret = pp->ops->msi_host_init(pp, &dw_pcie_msi_chip);
+			ret = pp->ops->msi_host_init(pci, &dw_pcie_msi_chip);
 			if (ret < 0)
 				goto error;
 		}
drivers/pci/dwc/pcie-designware.h +2 -1
index 622ffcf..2ac99fa 100644
@@ -140,7 +140,8 @@ struct dw_pcie_host_ops {
 	phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
 	u32 (*get_msi_data)(struct pcie_port *pp, int pos);
 	void (*scan_bus)(struct pcie_port *pp);
-	int (*msi_host_init)(struct pcie_port *pp, struct msi_controller *chip);
+	int (*msi_host_init)(struct dw_pcie *pci, struct msi_controller *chip);
+	void (*msi_irq_ack)(int irq, struct pcie_port *pp);
 };
 
 struct pcie_port {
Signature · 1 line
2.9.3
author
#11 lore raw

RFC v2 8/8 pci: removing old irq api from pcie-designware

In reply to Joao Pinto

This patch removes the old interrupt API.

Signed-off-by Joao Pinto <[email protected]>

---
changes v1->v2:
- removes less because the patch set no longer has the configurable toggle between APIs

 drivers/pci/dwc/pci-keystone-dw.c      |   2 +-
 drivers/pci/dwc/pci-keystone.h         |   2 +-
 drivers/pci/dwc/pci-layerscape.c       |   3 +-
 drivers/pci/dwc/pcie-designware-host.c | 192 +--------------------------------
 drivers/pci/dwc/pcie-designware.h      |   2 +-
 5 files changed, 6 insertions(+), 195 deletions(-)
drivers/pci/dwc/pci-keystone-dw.c +1 -1
index da1472e..30a5352 100644
@@ -162,7 +162,7 @@ void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
 			 BIT(bit_pos));
 }
 
-int ks_dw_pcie_msi_host_init(struct dw_pcie *pci, struct msi_controller *chip)
+int ks_dw_pcie_msi_host_init(struct dw_pcie *pci)
 {
 	/* overide number of vectors and sent them to Keystone Max MSI IRQs */
 	pci->pp.num_vectors = MAX_MSI_IRQS;
drivers/pci/dwc/pci-keystone.h +1 -1
index 83179382..89119271 100644
@@ -59,5 +59,5 @@ void ks_dw_pcie_msi_irq_ack(int i, struct pcie_port *pp);
 void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq);
 void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq);
 void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp);
-int ks_dw_pcie_msi_host_init(struct dw_pcie *pci, struct msi_controller *chip);
+int ks_dw_pcie_msi_host_init(struct dw_pcie *pci);
 int ks_dw_pcie_link_up(struct dw_pcie *pci);
drivers/pci/dwc/pci-layerscape.c +1 -2
index 4fb491b..231ea75 100644
@@ -162,8 +162,7 @@ static void ls_pcie_host_init(struct pcie_port *pp)
 	iowrite32(0, pci->dbi_base + PCIE_DBI_RO_WR_EN);
 }
 
-static int ls_pcie_msi_host_init(struct dw_pcie *pci,
-				 struct msi_controller *chip)
+static int ls_pcie_msi_host_init(struct dw_pcie *pci)
 {
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
drivers/pci/dwc/pcie-designware-host.c +2 -190

216 lines not on this page · raw message

drivers/pci/dwc/pcie-designware.h +1 -1
index 2ac99fa..f486587 100644
@@ -140,7 +140,7 @@ struct dw_pcie_host_ops {
 	phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
 	u32 (*get_msi_data)(struct pcie_port *pp, int pos);
 	void (*scan_bus)(struct pcie_port *pp);
-	int (*msi_host_init)(struct dw_pcie *pci, struct msi_controller *chip);
+	int (*msi_host_init)(struct dw_pcie *pci);
 	void (*msi_irq_ack)(int irq, struct pcie_port *pp);
 };
Signature · 1 line
2.9.3