fix oops in usbserial_cleanup function;
Subsystems (2)
From:ma rui <[email protected]>
1. I find this bug on OpenSUSE 11.3 which kernel version is 2.6.34, but the latest kernel version 2.6.36-rc7 aslo have this bug. This patch is based on the kernel of 2.6.36-rc7
2. bug report:
a. Install huawei datacard dashboard on OpenSUSE 11.3
b. Plug in huawei datacard into OpenSUSE 11.3 which kernel version is 2.6.36-rc7
c. After the dashboard has detected the device, I pull out the usb datacard
d. Close dashboard,then kernel panic will happen in usbserial_clean function
Yes, the datacard exit without close the port.
But after the dashboard connect internet with hauwei datacard, then Hibernate/resume, the bug will happen too. Do you have any other good idea to resolve this bug,or please apply my patch,thanks. :)
drivers/usb/serial/usb-serial.c +10 -0
@@ -328,6 +328,16 @@ static void serial_cleanup(struct tty_st/* The console is magical. Do not hang up the console hardware * or there will be tears. */ +if (NULL == port) +return ; +mutex_lock (&port->serial->disc_mutex); +if (port->serial->disconnected) { +return_serial (port->serial); +mutex_unlock (&port->serial->disc_mutex); +return ; + } +mutex_unlock (&port->serial->disc_mutex); +if (port->port.console)return ;
----- Original Message -----
From: "Greg KH" <[email protected]>
To: "marui" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; "Lin Lei" <[email protected]>; "Franko Fang" <[email protected]>; <[email protected]>
Sent: Friday, October 15, 2010 12:20 PM
Subject: Re: [PATCH] fix oops in usbserial_cleanup function;
Quoted 56 lines · marui
Quoted 6 lines
1. I find this bug on OpenSUSE 11.3 which kernel vesion is 2.6.34, but the latest kernel vesion 2.6.36-rc7 aslo have this bug. This patch is based on the kernel of 2.6.36-rc7.
2. Bug report:
a. Install huawei datacard dashboard on OpenSUSE 11.3
b. Plug in huawei datacard into OpenSUSE 11.3 which kernel verison is 2.6.36-rc7
c. After the dashboard has detected the device, I pull out the usb datacard
d. close datashboard,then kernel panic will happen inusbserial_cleanupfunction.What does the "dashboard" program do? Hold the port open?
Quoted 9 lines
3. fix the bug:
I findusbserial_cleanupshould judge the usb device wheher has been disconnected firtly.diff -uprN -X linux-2.6.36-rc7-orig/Documentation/dontdiff
linux-2.6.36-rc7-orig/drivers/usb/serial/usb-serial.clinux-2.6.36-rc7/drivers/usb/serial/usb-serial.cdrivers/usb/serial/usb-serial.c 2010-10-14 20:59:47.000000000 -0400 static void serial_cleanup(struct tty_st · line 335
Quoted 8 lines
drivers/usb/serial/usb-serial.c 2010-10-14 20:59:47.000000000 -0400 renamed from drivers/usb/serial/usb-serial.c 2010-10-06 16:39:52.000000000 -0400 +5
-0@@ -328,6 +328,20 @@ static void serial_cleanup(struct tty_st /* The console is magical. Do not hang up the console hardware * or there will be tears. */ + dbg("%s start\n",__func__); + if(NULL == port) + { + dbg("%s NULL == port\n",__func__); + return;We don't need to keep the dbg statements here, do we?
drivers/usb/serial/usb-serial.c 2010-10-14 20:59:47.000000000 -0400 static void serial_cleanup(struct tty_st · line 342
Quoted 7 lines
drivers/usb/serial/usb-serial.c 2010-10-14 20:59:47.000000000 -0400 renamed from drivers/usb/serial/usb-serial.c 2010-10-06 16:39:52.000000000 -0400 +7
-0+ } + mutex_lock(&port->serial->disc_mutex); + if (port->serial->disconnected) + { + dbg("%s port->serial->disconnected\n",__func__); + return_serial(port->serial); + return;You can't return with a lock held.
drivers/usb/serial/usb-serial.c 2010-10-14 20:59:47.000000000 -0400 static void serial_cleanup(struct tty_st · line 346
Quoted 4 lines
drivers/usb/serial/usb-serial.c 2010-10-14 20:59:47.000000000 -0400 renamed from drivers/usb/serial/usb-serial.c 2010-10-06 16:39:52.000000000 -0400 +2
-0+ } + mutex_unlock(&port->serial->disc_mutex); if (port->port.console) return;Your tabs and spaces got all mixed up, and it can't be applied. Also, I need a "Signed-off-by:" line to be able to accept it. Care to read the file
Documentation/SubmittingPatchesfor how to format a patch so we can take it?Also, run the patch through
scripts/checkpatch.pland resolve the coding style issues before resending please.thanks,
greg k-h
Quoted 27 lines · On Fri, 15 Oct 2010 [email protected] wrote:
From:ma rui <[email protected]>
1. I find this bug on OpenSUSE 11.3 which kernel version is 2.6.34, but the latest kernel version 2.6.36-rc7 aslo have this bug. This patch is based on the kernel of 2.6.36-rc7
2. bug report:
a. Install huawei datacard dashboard on OpenSUSE 11.3
b. Plug in huawei datacard into OpenSUSE 11.3 which kernel version is 2.6.36-rc7
c. After the dashboard has detected the device, I pull out the usb datacard
d. Close dashboard,then kernel panic will happen inusbserial_cleanfunctionYes, the datacard exit without close the port.
But after the dashboard connect internet with hauwei datacard, then Hibernate/resume, the bug will happen too. Do you have any other good idea to resolve this bug,or please apply my patch,thanks. :)
Signed-off-by ma rui <[email protected]>diff -uprN -X linux-2.6.36-rc7_orig/Documentation/dontdiff
linux-2.6.36-rc7_orig/drivers/usb/serial/usb-serial.clinux-2.6.36-rc7/drivers/usb/serial/usb-serial.cdrivers/usb/serial/usb-serial.c +2
-0@@ -328,6 +328,16 @@ static void serial_cleanup(struct tty_st/* The console is magical. Do not hang up the console hardware * or there will be tears. */ +if (NULL == port) +return ;
drivers/usb/serial/usb-serial.c static void serial_cleanup(struct tty_st · line 342
Quoted 10 lines
drivers/usb/serial/usb-serial.c +8
-0+mutex_lock (&port->serial->disc_mutex); +if (port->serial->disconnected) { +return_serial (port->serial); +mutex_unlock (&port->serial->disc_mutex); +return ; + } +mutex_unlock (&port->serial->disc_mutex); +if (port->port.console)return ;
This patch is clearly wrong, since it skips some of the actions that should be taken by serial_cleanup even if the port is already disconnected.
Besides, the main point of the patch is to avoid problems when port = tty->driver_data turns out to be NULL. But the only place where tty->driver_data is set to NULL is further below in this same function! So the problems should never arise.
If they do arise, it indicates there's a bug somewhere else. That other bug can't be fixed by changing this function.
Alan Stern
Quoted 44 lines · Alan Stern
Quoted 27 lines · On Fri, 15 Oct 2010 [email protected] wrote:
From:ma rui <[email protected]>
1. I find this bug on OpenSUSE 11.3 which kernel version is 2.6.34, but the latest kernel version 2.6.36-rc7 aslo have this bug. This patch is based on the kernel of 2.6.36-rc7
2. bug report:
a. Install huawei datacard dashboard on OpenSUSE 11.3
b. Plug in huawei datacard into OpenSUSE 11.3 which kernel version is 2.6.36-rc7
c. After the dashboard has detected the device, I pull out the usb datacard
d. Close dashboard,then kernel panic will happen inusbserial_cleanfunctionYes, the datacard exit without close the port.
But after the dashboard connect internet with hauwei datacard, then Hibernate/resume, the bug will happen too. Do you have any other good idea to resolve this bug,or please apply my patch,thanks. :)
Signed-off-by ma rui <[email protected]>diff -uprN -X linux-2.6.36-rc7_orig/Documentation/dontdiff
linux-2.6.36-rc7_orig/drivers/usb/serial/usb-serial.clinux-2.6.36-rc7/drivers/usb/serial/usb-serial.cdrivers/usb/serial/usb-serial.c +2
-0@@ -328,6 +328,16 @@ static void serial_cleanup(struct tty_st/* The console is magical. Do not hang up the console hardware * or there will be tears. */ +if (NULL == port) +return ;drivers/usb/serial/usb-serial.c static void serial_cleanup(struct tty_st · line 342
Quoted 10 lines
drivers/usb/serial/usb-serial.c +8
-0+mutex_lock (&port->serial->disc_mutex); +if (port->serial->disconnected) { +return_serial (port->serial); +mutex_unlock (&port->serial->disc_mutex); +return ; + } +mutex_unlock (&port->serial->disc_mutex); +if (port->port.console)return ;This patch is clearly wrong, since it skips some of the actions that should be taken by
serial_cleanupeven if the port is already disconnected.
Quoted 7 lines
Besides, the main point of the patch is to avoid problems when port =
tty->driver_dataturns out to be NULL. But the only place wheretty->driver_datais set to NULL is further below in this same function! So the problems should never arise.If they do arise, it indicates there's a bug somewhere else. That other bug can't be fixed by changing this function.
Yeah, I agree.
Ma, what is the full oops message that you are seeing here when you remove the device? And does userspace still have the device open at that time? I'm guessing so as it sounds like the oops happens when the port is then closed. I can't duplicate that problem here.
thanks,
greg k-h
Re: [PATCH] fix oops in usbserial_cleanup function
Hi,
I happend to the following bug:
bug report:
a. Install huawei datacard dashboard on OpenSUSE 11.3
b. Plug in huawei datacard into OpenSUSE 11.3 which kernel verison is 2.6.34
c. After the dashboard has detected the device, I pull out the usb datacard.
d. close datashboard,then kernel panic will happen in usbserial_cleanup function and there are oops log as following:
I find when pull out the usb datacard, then close dashboard without shutdowning the usb serial port. the oops will be happened.
I want to know what happened in this process.
I know my patch will leak memory, But I don't have any other better solution.
Would you mind giving me a hand?
thanks a lot.
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999650] serial_cleanup start-------------- Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999651] serial_cleanup - port 5 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999653] destroy_serial - (null) Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999654] return_serial Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999671] BUG: unable to handle kernel NULL pointer dereference at (null) Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999675] IP: [<(null)>] (null) Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999677] *pdpt = 0000000032b21001 *pde = 0000000000000000 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999680] Oops: 0010 [#1] PREEMPT SMP Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999683] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.3/usb5/devnum Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999686] Modules linked in: option usbserial ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd mperf ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep sr_mod snd_pcm iTCO_wdt iTCO_vendor_support floppy cdrom sg i2c_i801 pcspkr snd_timer sky2 snd soundcore snd_page_alloc i915 drm_kms_helper intel_agp drm i2c_algo_bit button video fan processor ata_generic thermal thermal_sys [last unloaded: option] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999722] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999725] Pid: 10, comm: events/1 Tainted: G R 2.6.34-12-desktop #1 To be filled by O.E.M./FFFFFFFFFF Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999727] EIP: 0060:[<00000000>] EFLAGS: 00010202 CPU: 1 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999730] EIP is at 0x0 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999732] EAX: f39f0ec0 EBX: f39f0ef4 ECX: 00000005 EDX: f7b569c0 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999734] ESI: f39f0ec0 EDI: f39f0ef4 EBP: f40e2e00 ESP: f40e5f10 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999735] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999737] Process events/1 (pid: 10, ti=f40e4000 task=f40e2e00 task.ti=f40e4000) Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999739] Stack: Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999740] fb877b40 fb87aefd fb87ab80 00000000 f39f0ef4 fb877ac0 e02d2928 c03f351a Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999744] <0> f39f0ec0 f39f0ef8 fb877e93 fb87aeaa fb87aab8 00000005 e02d2800 e3951c80 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999749] <0> c0476fa7 c1488980 e02d2928 c0476f80 c025cde9 f40e309c e4f4a357 000005db Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999754] Call Trace: Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999756] Inexact backtrace: Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999757] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999762] [<fb877b40>] ? destroy_serial+0x80/0xd0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999765] [<fb877ac0>] ? destroy_serial+0x0/0xd0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999770] [<c03f351a>] ? kref_put+0x2a/0x60 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999773] [<fb877e93>] ? serial_cleanup+0x73/0xc0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999777] [<c0476fa7>] ? release_one_tty+0x27/0xb0 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999779] [<c0476f80>] ? release_one_tty+0x0/0xb0 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999783] [<c025cde9>] ? run_workqueue+0x79/0x170 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999786] [<c025cf63>] ? worker_thread+0x83/0xe0 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999789] [<c0260140>] ? autoremove_wake_function+0x0/0x40 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999791] [<c025cee0>] ? worker_thread+0x0/0xe0 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999793] [<c025fd34>] ? kthread+0x74/0x80 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999795] [<c025fcc0>] ? kthread+0x0/0x80 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999799] [<c0203826>] ? kernel_thread_helper+0x6/0x10 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999800] Code: Bad EIP value. Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999803] EIP: [<00000000>] 0x0 SS:ESP 0068:f40e5f10 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999809] CR2: 0000000000000000 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999812] ---[ end trace 6f0d5616c481e9c5 ]--- Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109270] ------------[ cut here ]------------ Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109280] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.34/linux-2.6.34/kernel/workqueue.c:485 flush_cpu_workqueue+0xb9/0xc0() Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109282] Hardware name: FFFFFFFFFF Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109283] Modules linked in: option usbserial ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd mperf ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep sr_mod snd_pcm iTCO_wdt iTCO_vendor_support floppy cdrom sg i2c_i801 pcspkr snd_timer sky2 snd soundcore snd_page_alloc i915 drm_kms_helper intel_agp drm i2c_algo_bit button video fan processor ata_generic thermal thermal_sys [last unloaded: option] Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109332] Pid: 10288, comm: gdm-simple-slav Tainted: G R D 2.6.34-12-desktop #1 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109334] Call Trace: Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109345] [<c02065c3>] try_stack_unwind+0x173/0x190 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109349] [<c02051cf>] dump_trace+0x3f/0xe0 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109352] [<c020662b>] show_trace_log_lvl+0x4b/0x60 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109355] [<c0206658>] show_trace+0x18/0x20 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109360] [<c064d690>] dump_stack+0x6d/0x72 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109364] [<c024430e>] warn_slowpath_common+0x6e/0xb0 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109367] [<c0244363>] warn_slowpath_null+0x13/0x20 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109370] [<c025c2f9>] flush_cpu_workqueue+0xb9/0xc0 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109374] [<c025c60e>] flush_workqueue+0x2e/0x50 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109378] [<c047e9f3>] tty_ldisc_release+0x23/0x60 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109382] [<c04787b9>] tty_release+0x379/0x5b0 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109388] [<c02feaa7>] __fput+0xc7/0x1d0 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109392] [<c02fb259>] filp_close+0x49/0x70 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109395] [<c02fb2ed>] sys_close+0x6d/0xc0 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109398] [<c020324c>] sysenter_do_call+0x12/0x22 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109406] [<ffffe424>] 0xffffe424 Oct 27 00:20:54 linux-mec9 kernel: [ 6486.109407] ---[ end trace 6f0d5616c481e9c6 ]---
----- Original Message -----
From: "Greg KH" <[email protected]>
To: "Alan Stern" <[email protected]>
Cc: <[email protected]>; "USB list" <[email protected]>; "Kernel development list" <[email protected]>; <[email protected]>; "Lin Lei" <[email protected]>; "Franko Fang" <[email protected]>; <[email protected]>
Sent: Saturday, October 16, 2010 3:09 AM
Subject: Re: [PATCH] fix oops in usbserial_cleanup function;
Quoted 65 lines · Alan Stern
Quoted 46 lines · On Fri, 15 Oct 2010 [email protected] wrote:
Quoted 30 lines
From:ma rui <[email protected]>
1. I find this bug on OpenSUSE 11.3 which kernel version is 2.6.34, but the latest kernel version 2.6.36-rc7 aslo have this bug. This patch is based on the kernel of 2.6.36-rc7
2. bug report:
a. Install huawei datacard dashboard on OpenSUSE 11.3
b. Plug in huawei datacard into OpenSUSE 11.3 which kernel version is 2.6.36-rc7
c. After the dashboard has detected the device, I pull out the usb datacard
d. Close dashboard,then kernel panic will happen inusbserial_cleanfunctionYes, the datacard exit without close the port.
But after the dashboard connect internet with hauwei datacard, then Hibernate/resume, the bug will happen too. Do you have any other good idea to resolve this bug,or please apply my patch,thanks. :)
Signed-off-by ma rui <[email protected]>diff -uprN -X linux-2.6.36-rc7_orig/Documentation/dontdiff
linux-2.6.36-rc7_orig/drivers/usb/serial/usb-serial.clinux-2.6.36-rc7/drivers/usb/serial/usb-serial.cdrivers/usb/serial/usb-serial.c 2010-10-15 01:57:36.000000000 -0400 renamed from drivers/usb/serial/usb-serial.c 2010-10-06 16:39:52.000000000 -0400 +2
-0@@ -328,6 +328,16 @@ static void serial_cleanup(struct tty_st /* The console is magical. Do not hang up the console hardware * or there will be tears. */ + if (NULL == port) + return;drivers/usb/serial/usb-serial.c 2010-10-15 01:57:36.000000000 -0400 static void serial_cleanup(struct tty_st · line 342
Quoted 10 lines
drivers/usb/serial/usb-serial.c 2010-10-15 01:57:36.000000000 -0400 renamed from drivers/usb/serial/usb-serial.c 2010-10-06 16:39:52.000000000 -0400 +8
-0+ mutex_lock(&port->serial->disc_mutex); + if (port->serial->disconnected) { + return_serial(port->serial); + mutex_unlock(&port->serial->disc_mutex); + return; + } + mutex_unlock(&port->serial->disc_mutex); + if (port->port.console) return;This patch is clearly wrong, since it skips some of the actions that should be taken by
serial_cleanupeven if the port is already disconnected.Quoted 7 lines
Besides, the main point of the patch is to avoid problems when port =
tty->driver_dataturns out to be NULL. But the only place wheretty->driver_datais set to NULL is further below in this same function! So the problems should never arise.If they do arise, it indicates there's a bug somewhere else. That other bug can't be fixed by changing this function.
Yeah, I agree.
Ma, what is the full oops message that you are seeing here when you remove the device? And does userspace still have the device open at that time? I'm guessing so as it sounds like the oops happens when the port is then closed. I can't duplicate that problem here.
thanks,
greg k-h
Re: [PATCH] fix oops in usbserial_cleanup function
Quoted 2 lines
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999651] serial_cleanup - port 5 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999653] destroy_serial - (null)
So someone called destroy serial with serial->type->desc NULL
Quoted 3 lines
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999654] return_serial Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999671] BUG: unable to handle kernel NULL pointer dereference at (null) Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999675] IP: [<(null)>] (null)
And serial->type->release NULL
Quoted 3 lines
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999762] [<fb877b40>] ? destroy_serial+0x80/0xd0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999765] [<fb877ac0>] ? destroy_serial+0x0/0xd0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999770] [<c03f351a>] ? kref_put+0x2a/0x60
Which came from the tty close (which will be after the hangup if you pulled the card out with the modem in use). Kref leak perhaps ?
What driver is actually being used for the card itself ?
Alan
Re: [PATCH] fix oops in usbserial_cleanup function
Hi,
thanks for your responds.
the card use option.ko
Bestregards
marui
----- Original Message -----
From: "Alan Cox" <[email protected]>
To: "marui" <[email protected]>
Cc: "Greg KH" <[email protected]>; "Alan Stern" <[email protected]>; "USB list" <[email protected]>; "Kernel development list" <[email protected]>; <[email protected]>; <[email protected]>
Sent: Wednesday, October 27, 2010 5:32 PM
Subject: Re: [PATCH] fix oops in usbserial_cleanup function
Quoted 21 lines
Quoted 2 lines
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999651] serial_cleanup - port 5 Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999653] destroy_serial - (null)So someone called destroy serial with
serial->type->descNULLQuoted 3 lines
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999654] return_serial Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999671] BUG: unable to handle kernel NULL pointer dereference at (null) Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999675] IP: [<(null)>] (null)And
serial->type->releaseNULLQuoted 3 lines
Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999762] [<fb877b40>] ? destroy_serial+0x80/0xd0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999765] [<fb877ac0>] ? destroy_serial+0x0/0xd0 [usbserial] Oct 27 00:20:10 linux-mec9 kernel: [ 6441.999770] [<c03f351a>] ? kref_put+0x2a/0x60Which came from the tty close (which will be after the hangup if you pulled the card out with the modem in use). Kref leak perhaps ?
What driver is actually being used for the card itself ?
Alan