Skip to contentSkip to conversation

raspberry Pi core-image-sato

meta-raspberrypi Herve Jourdain 2 participants 3 messages Jul 23, 2015

lore
Share & tools
lore
#0 lore raw

Hi,

Not sure if it’s the case, because the config.log might give more details, but maybe you can try adding the following to your recipe :

EXTRA_OECONF += “-I${STAGING_DIR_TARGET}/usr/include/interface/vcos/pthreads/ \

                                      -I${STAGING_DIR_TARGET}/usr/include/interface/vmcs_host/linux/"

I needed that to compile other packages that were using EGL.

Once again, just a hint, no warranty whatsoever…

BR,

Hervé

From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Edward Vidal
Sent: jeudi 23 juillet 2015 16:38
To: [email protected] <mailto:[email protected]>
Subject: ***SPAM*** [yocto] raspberry Pi core-image-sato

Hi Gary,

Is this the log that you need?

I also ran the bitbake -DD core-image-sato and have the log for that run.

| WARNING: exit code 1 from a shell command.
| ERROR: oe_runconf failed
| ERROR: Function failed: do_configure (log file is located at /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)

ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'

Let me know what I can provide.

Thanks for the help

Regards,

Edward Vidal Jr.
e-mail [email protected] <mailto:[email protected]> 915-595-1613

#1 lore raw
Quoted 9 lines · Herve Jourdain

Hi,

Not sure if it’s the case, because the config.log might give more details, but maybe you can try adding the following to your recipe :

EXTRA_OECONF += “-I${STAGING_DIR_TARGET}/usr/include/interface/vcos/pthreads/ \

                                       -I${STAGING_DIR_TARGET}/usr/include/interface/vmcs_host/linux/"

I needed that to compile other packages that were using EGL.

These should not be needed if you use DEPENDS correctly, bitbake takes care of them for you.

Quoted 36 lines

Once again, just a hint, no warranty whatsoever…

BR,

Hervé

*From:*[email protected] <mailto:[email protected]> [mailto:[email protected]] *On Behalf Of *Edward Vidal *Sent:* jeudi 23 juillet 2015 16:38
*To:* [email protected] <mailto:[email protected]>
*Subject:* ***SPAM*** [yocto] raspberry Pi core-image-sato

Hi Gary,

Is this the log that you need?

I also ran the bitbake -DD core-image-sato and have the log for that run.

| WARNING: exit code 1 from a shell command.
| ERROR: oe_runconf failed
| ERROR: Function failed: do_configure (log file is located at

/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)
ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'

Let me know what I can provide.

Thanks for the help

Regards,

Edward Vidal Jr.
e-mail [email protected] <mailto:[email protected]> 915-595-1613

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#2 lore raw

Hi Gary,

What worries me is I don't see that kind of paths in the log file that Edward sent.
And I'm just thinking the package configuration itself might need to know the where to find those headers - I believe I needed something similar for QT.
This said, it's very difficult to know for sure without having the log of what went wrong in the configuration phase, that might be seen in config.log. That's why it's just a blind guess at best, some information is missing...

BR,

Herve

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Gary Thomas
Sent: jeudi 23 juillet 2015 17:11
To: [email protected]
Subject: Re: [yocto] [meta-raspberrypi] raspberry Pi core-image-sato

Quoted 3 lines · Herve Jourdain

Hi,

Not sure if it’s the case, because the config.log might give more details,

but maybe you can try adding the following to your recipe :

Quoted 5 lines

EXTRA_OECONF += “-I${STAGING_DIR_TARGET}/usr/include/interface/vcos/pthreads/ \

-I${STAGING_DIR_TARGET}/usr/include/interface/vmcs_host/linux/"

Quoted 2 lines

I needed that to compile other packages that were using EGL.

These should not be needed if you use DEPENDS correctly, bitbake takes care of them for you.

Quoted 20 lines

Once again, just a hint, no warranty whatsoever…

BR,

Hervé

*From:*[email protected] <mailto:[email protected]> [mailto:[email protected]] *On Behalf Of *Edward Vidal *Sent:* jeudi 23 juillet 2015 16:38
*To:* [email protected] <mailto:[email protected]> *Subject:* ***SPAM*** [yocto] raspberry Pi core-image-sato

Hi Gary,

Is this the log that you need?

I also ran the bitbake -DD core-image-sato and have the log for that run.

Quoted 7 lines
| WARNING: exit code 1 from a shell command.
| ERROR: oe_runconf failed
| ERROR: Function failed: do_configure (log file is located at

/home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp- vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/te mp/log.do_configure.9672)
ERROR: Task 4597

(/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libe poxy_git.bb, do_configure) failed with exit code '1'

Quoted 13 lines

Let me know what I can provide.

Thanks for the help

Regards,

Edward Vidal Jr.
e-mail [email protected] <mailto:[email protected]> 915-595-1613

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto