Skip to contentSkip to conversation

reading from devices in RAW mode

DISCUSSION Folkert van Heusden 1 participant 1 message Jan 18, 2003 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

I should clarify my question: I do not really mean reading RAW from the device, but I want to read RAW like how its on this, without any error-checking or anything.
Like the "CDROMREADRAW"-ioctl for CD-ROMs.

-----Oorspronkelijk bericht-----
Van: Rob Wilkens [mailto:[email protected]]
Verzonden: zaterdag 18 januari 2003 14:22
Aan: Folkert van Heusden
Onderwerp: Re: reading from devices in RAW mode

Just an idea, but try openning "/dev/fd0" for example -as the floppy- directly, then "lseek"ing around and reading/writing as necessary.

Same should work for ide (open /dev/hda, or /dev/hdb, etc.) or scsi (/dev/scd0, etc.).

As per where the useful information is stored on the disk, you'll have to study filesystem code, and there I couldn't help you.

-Rob

Quoted 8 lines · Folkert van Heusden

Maybe I should've sticked to google (altough it wasn't to helpfull this time) but
in this mailinglist there are a lot of knowledgeable people, so here's my question:
for my data-recovery tool I like to read sectors from devices in RAW mode. found how to do that for cd-rom, but ide/scsi/floppy still leave me clueless.
Anyone out there who can tell me how to do all of this? (or give me hints

on

Quoted 7 lines

where to find information that google hides from me)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/