U-Boot : USB Slave Mode ?
Hi,
Does U-Boot support USB Slave mode ?
I have an ARM926EJS board with USB-OTG. I can configure it in USB Slave mode using some register settings.
But I need to run U-Boot on top of it so that I can access the USB Slave functionality.
Kindly suggest how I can use U-Boot in USB Slave mode and what configuration changes are required ?
Thanks in Advance.
Regards,
Neeraj
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
Contact your Administrator for further information.
Dear Neeraj,
Posting a similar message several times will get you ignored or flamed. Don't do it.
Quoted 1 line · Neeraj Jayaswal
Does U-Boot support USB Slave mode ?
Not out of the box, though IIRC this has been done before.
Quoted 7 lines
I have an ARM926EJS board with USB-OTG. I can configure it in USB Slave mode using some register settings.
But I need to run U-Boot on top of it so that I can access the USB Slave functionality.Kindly suggest how I can use U-Boot in USB Slave mode and what configuration changes are required ?
You will have to implement it. Can you help me understand why exactly you would want such a feature in U-Boot?
Quoted 3 lines
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
Contact your Administrator for further information.
Please contact your administrator for further information on how to get rid of this useless message.
Best regards
Markus Klotzbuecher
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
Sorry, will not be repeated again !!
Regards,
Neeraj
-----Original Message-----
From: Markus Klotzbucher [mailto:mk at denx.de]
Sent: Friday, April 18, 2008 1:28 PM
To: njayaswal at tataelxsi.co.in
Cc: 'Wolfgang Denk'; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] U-Boot : USB Slave Mode ?
Dear Neeraj,
Posting a similar message several times will get you ignored or flamed. Don't do it.
Quoted 1 line · Neeraj Jayaswal
Does U-Boot support USB Slave mode ?
Not out of the box, though IIRC this has been done before.
Quoted 1 line
I have an ARM926EJS board with USB-OTG. I can configure it in USB Slave
mode
Quoted 5 lines
using some register settings.
But I need to run U-Boot on top of it so that I can access the USB Slave functionality.Kindly suggest how I can use U-Boot in USB Slave mode and what
configuration
Quoted 1 line
changes are required ?
You will have to implement it. Can you help me understand why exactly you would want such a feature in U-Boot?
Quoted 1 line
The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
Quoted 2 lines
Contact your Administrator for further information.
Please contact your administrator for further information on how to get rid of this useless message.
Best regards
Markus Klotzbuecher
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
Contact your Administrator for further information.