Skip to contentSkip to conversation

problems with sblive as well as 3com 3c905

DISCUSSION Lukasz Gogolewski 5 participants 6 messages Jan 31, 2001 – Feb 1, 2001

lore
Share & tools
lore
#0 lore raw

After I compiled kernel 2.4.1 on rh 6.2 I enabled module support for 2 of those devices.

However when I rebooted my machine both of those devices are not working.

I don't know what's wrong since I did make moudle and make module_install.

When I try to configure mdoule for the sound card, I get a message saying that module wasn't found.

For the network card I get Delaying initialization

any suggestions on how to fix it?

- Lucas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw

You need to create a symlink

ln -s /lib/modules/2.4.1/kernel/drivers/net /lib/modules/2.4.1/net

That will fix the nic, I am not sure about sound. You may need to create a misc link like

ln -s /lib/modules/2.4.1/kernel/drivers/misc /lib/modules/2.4.1/misc

----- Original Message -----
From: "Lukasz Gogolewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 31, 2001 4:03 PM
Subject: problems with sblive as well as 3com 3c905

Quoted 22 lines

After I compiled kernel 2.4.1 on rh 6.2 I enabled module support for 2 of those devices.

However when I rebooted my machine both of those devices are not working.

I don't know what's wrong since I did make moudle and make module_install.

When I try to configure mdoule for the sound card, I get a message saying that module wasn't found.

For the network card I get Delaying initialization

any suggestions on how to fix it?

- Lucas

Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

On Wed, 31 Jan 2001, Timothy A. DeWees wrote:

How about just upgrading modutils?!

Quoted 7 lines

You need to create a symlink

ln -s /lib/modules/2.4.1/kernel/drivers/net /lib/modules/2.4.1/net

That will fix the nic, I am not sure about sound. You may need to create a misc link like

Quoted 28 lines

ln -s /lib/modules/2.4.1/kernel/drivers/misc /lib/modules/2.4.1/misc

----- Original Message -----
From: "Lukasz Gogolewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 31, 2001 4:03 PM
Subject: problems with sblive as well as 3com 3c905

Quoted 18 lines

After I compiled kernel 2.4.1 on rh 6.2 I enabled module support for 2 of those devices.

However when I rebooted my machine both of those devices are not working.

I don't know what's wrong since I did make moudle and make module_install.

When I try to configure mdoule for the sound card, I get a message saying that module wasn't found.

For the network card I get Delaying initialization

any suggestions on how to fix it?

- Lucas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
In reply to Lukasz Gogolewski

You need to get the latest modutils: the directory tree under /lib/modules changed recently and that's why it works if you create symlinks...

Quoted 49 lines · [email protected] ("Timothy A. DeWees") writes:

You need to create a symlink

ln -s /lib/modules/2.4.1/kernel/drivers/net /lib/modules/2.4.1/net

That will fix the nic, I am not sure about sound. You may need to create a misc link like

ln -s /lib/modules/2.4.1/kernel/drivers/misc /lib/modules/2.4.1/misc

----- Original Message -----
From: "Lukasz Gogolewski" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 31, 2001 4:03 PM
Subject: problems with sblive as well as 3com 3c905

Quoted 22 lines

After I compiled kernel 2.4.1 on rh 6.2 I enabled module support for 2 of those devices.

However when I rebooted my machine both of those devices are not working.

I don't know what's wrong since I did make moudle and make module_install.

When I try to configure mdoule for the sound card, I get a message saying that module wasn't found.

For the network card I get Delaying initialization

any suggestions on how to fix it?

- Lucas

Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

Signature · 8 lines
Mathieu CHOUQUET-STRINGER              E-Mail : [email protected]
     Learning French is trivial: the word for horse is cheval, and
               everything else follows in the same way.
                        -- Alan J. Perlis
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#4 lore raw
In reply to Lukasz Gogolewski
Quoted 10 lines · Lukasz Gogolewski

After I compiled kernel 2.4.1 on rh 6.2 I enabled module support for 2 of those devices.

However when I rebooted my machine both of those devices are not working.

I don't know what's wrong since I did make moudle and make module_install.

Quoted 7 lines

When I try to configure mdoule for the sound card, I get a message saying that module wasn't found.

For the network card I get Delaying initialization

any suggestions on how to fix it?

Upgrade modutils, pppd, and other things to fix all the "problems" with this kernel. I found this one out, becuase the guys here politely pointed that out to me that the "Documentation/Changes" file tells this stuff for every kernel release.

The module directory was redesigned, as well as other internals to the Kernel, and that's why newer utilities are required.

- Mike

===========================================================================
Michael B. Trausch [email protected]
Avid Linux User since April, '96! AIM: ML100Smkr

Contactable via IRC (DALNet) or AIM as ML100Smkr
===========================================================================

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
In reply to Lukasz Gogolewski
Quoted 3 lines · Lukasz Gogolewski

any suggestions on how to fix it?

Oh, and I might add that all the URLs for the new programs that you have to get, are contained in the same file, Documentation/Changes.

- Mike

===========================================================================
Michael B. Trausch [email protected]
Avid Linux User since April, '96! AIM: ML100Smkr

Contactable via IRC (DALNet) or AIM as ML100Smkr
===========================================================================

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/