Skip to contentSkip to conversation

OpenGL

DISCUSSION Facundo Suarez 3 participants 3 messages Apr 3, 2004 – Apr 5, 2004

lore
Share & tools
lore
#0 lore raw

Hi all.

I have just bought my new nvidia fx 5200, 128 MB ddr 8x agp video card. And
i have downloaded the drivers form nvidia home page. I installed it, an configured as the README says i have to do. But, running on gentoo 1.4, kde 3.2.1, kernel 2.4.25, i cannot run my opengl screensaver. I thougth that with this card, it has to work, but, sometimes even hangs the system, other, it restarts my XFree86.

Can you help me ?

Thanks.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 9 lines · Facundo Suarez

Hi all.

I have just bought my new nvidia fx 5200, 128 MB ddr 8x agp video card. And
i have downloaded the drivers form nvidia home page. I installed it, an configured as the README says i have to do. But, running on gentoo 1.4, kde 3.2.1, kernel 2.4.25, i cannot run my opengl screensaver. I thougth that with this card, it has to work, but, sometimes even hangs the system, other, it restarts my XFree86.

Quoted 4 lines

Can you help me ?

Thanks.

hi,
have you use emerge for install it ?
something like :
emerge -av nvidia-kernel nvidia-glx
then
opengl-update nvidia

can you give the lsmod / XF86Config / glxinfo / /var/log/XFree86.0.log and /etc/XF86Config and dmesg ?

I think some could help you with this ...

an other thing is that i think you sould use the agpgart from nvidia
as only 2.6 kernel supports agp 8x (unless a backport have been done) or chage to kernel 2.6 (emerge applies the right patches to the nvidia drivers for 2.6 kernel)

you can also search on bugs.gentoo.org ...

aurel

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#2 lore raw

Thanks guy, i made what you said, and it worked just fine. Very nice. The only thing i see, is that the version of nvidia-kernel driver is a bit out of date. But it works better like this.

I think gentoo people will update it closely.

Thanks again.

Quoted 40 lines · Aurélien Francillon
Quoted 9 lines · Facundo Suarez

Hi all.

I have just bought my new nvidia fx 5200, 128 MB ddr 8x agp video card.
And i have downloaded the drivers form nvidia home page. I installed it, an configured as the README says i have to do. But, running on gentoo 1.4, kde 3.2.1, kernel 2.4.25, i cannot run my opengl screensaver. I thougth that with this card, it has to work, but, sometimes even hangs the system, other, it restarts my XFree86.

Quoted 3 lines

Can you help me ?

Thanks.

hi,
have you use emerge for install it ?
something like :
emerge -av nvidia-kernel nvidia-glx
then
opengl-update nvidia

can you give the lsmod / XF86Config / glxinfo / /var/log/XFree86.0.log and /etc/XF86Config and dmesg ?

I think some could help you with this ...

an other thing is that i think you sould use the agpgart from nvidia as only 2.6 kernel supports agp 8x (unless a backport have been done) or chage to kernel 2.6 (emerge applies the right patches to the nvidia drivers for 2.6 kernel)

you can also search on bugs.gentoo.org ...

aurel

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Signature · 11 lines
Facundo Suárez
FDSoft SA
icq:121172697
jabber:[email protected]
msn:[email protected]
Neuquén-Argentina
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs