two providers
Hi to all
i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned:
I have fedora core 4 as a linux server. there r two external links connected to this.
the settings are as: eth0 ->for internal (that is for LAN)
eth2 ->dsl connection
eth1 ->cable line connection( this connection has no gateway and netmask address provided so this is connected via ppp0. this is provided from ISP via DHCP but have the fixed ipaddress)i want to use these two link to provide the internet in my LAN where there are about 8 to 10 computers. i want that if any of the link goes down ...the other should continue the internet ...n also while both the links r up..the load should be shared between these two links....so that the net conection and downloads be faster....
i have heard about the scripts....that can do this....but i have no idea how to write these...scripts. i need these to be on after reboot also... i tried my best and i also refered the lartc.org ..but i could do a little only.
WHAT I DID: it works very well if i connect both of the links and the default path is via ppp0. but suppose if that is(ppp0) disconnected then the dsl connection can handle only upto 15/16 seconds. after that it disconnects . whats the solution ...plzz...as..soon as..possible...help..me...i m in big trouble.... UR SMALL HELP WILL BE A BIG BOON FOR ME
Remember that i don't have gateway and netmask of eth1 connection. it has ip address only.it is NATed via ppp0. and also my all working are based on lartc.org only...in case of dsl connection i have just replaced the ip and gateways with my ip and gateways....n in case of ppp0 conection i have put ppp0 in the place of gateway n netmask and in place of ip i have given the ip of that link.
THANKS IN ADVANCE
---------------------------------
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 8 lines · mangal regmi
Hi to all
i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned:
I have fedora core 4 as a linux server. there r two external links connected to this.
I there are 2 external links, What is the file /etc/sysconfig/network like?
Can you witre down the file?
the settings are as: eth0 ->for internal (that is for LAN)
Quoted 6 lines
eth2 ->dsl connection eth1 ->cable line connection( this connectionhas no gateway and netmask address provided so this is connected via ppp0. this is provided from ISP via DHCP but have the fixed ipaddress) Hey, What is this FIXED ip address? Is it a perment address?
YOUR eth0 of Fedora Server is for internal (that is for LAN) YOUR eth2 of Fedora Server is connected to the dsl connection. YOUR eth1 of Fedora Server is connected to the cable line connection. It has a ip.
i want to use these two link to provide the internet in my LAN where there
Quoted 7 lines
are about 8 to 10 computers. i want that if any of the link goes down ...the other should continue the internet ...n also while both the links r up..the
load should be shared between these two links....so that the net conection
and downloads be faster....i have heard about the scripts....that can do this....but i have no idea how to write these...scripts. i need these to be on after reboot also...
To come up the script after the reboot, There are two ways. Either you have to write everytning IN /etc/rc.d/rc.local or write the script as a seperate file and and make it executable by using chmod.
Pls see bellow.
first create the file as follows.
touch /etc/rc.d/loadbalancing
then , By using vi editor write the script and save it as usual. Then , Make it executable as follows.
chmod 755 /etc/rc.d/loadbalancing
and finally add PATH OF THE SCRIPT to /etc/rc.d/rc.local file as follows.
etc/rc.d/loadbalancing
That's it. Now, whenever you reboot the system, the scripts also comes up with the system.
i tried my best and i also refered the lartc.org ..but i could do a little
Quoted 8 lines
only.
WHAT I DID: it works very well if i connect both of the links and the default path is via ppp0. but suppose if that is(ppp0) disconnected then the dsl connection can handle only upto 15/16 seconds. after that it disconnects . whats the solution ...plzz...as..soon as..possible...help..me...i m in big trouble....
UR SMALL HELP WILL BE A BIG BOON FOR ME
COULD YOU PLS write down your RULES . then, I will be able to help you.
Remember that i don't have gateway and netmask of eth1 connection. it has
Quoted 5 lines
ip address only.it is NATed via ppp0. and also my all working are based on lartc.org only...in case of dsl connection i have just replaced the ip and gateways with my ip and gateways....n in case of ppp0 conection i have put ppp0 in the place of gateway n netmask and in place of ip i have given the ip of that link.
The above paragraph is not so clear.
THANKS IN ADVANCE
Quoted 12 lines
------------------------------
Luggage? GPS? Comic books?
Check out fitting gifts for grads<http://us.rd.yahoo.com/evt=48249/*http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz>at Yahoo! Search._______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 2 lines
Thank you Indunil Jayasooriya
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
many many thanks for ur help
ok i m making my problem more clear...
my LAN ip is :172.16.100.0/24
ip of eth1 is :202.51.78.122 and this is fixed and permanent address
and it has no netmask and gateway(so, to provide internet to my LAN i have used the ppp0 for this connection )
ip of eth2 : 203.78.165.154; netmask:255.255.255.248; gateway:203.78.165.153
for eth0 my file is :/etc/sysconfig/network-scripts/ifcfg-eth0
for eth1 :/etc/sysconfig/network-scripts/ifcfg-eth1 for eth2:/etc/sysconfig/network-scripts/ifcfg-eth2
and my rules are placed in /etc/iproute2/rt_tables as suggested by lartc.org
and the whole copy of my above file is copied below:::>>>
#
# reserved values # #255 local #254 main #253 default #0 unspec # # local # #1 inr.ruhep
#
# below this is added by me and above this is by default # two addational routing tables
#ip route add 202.51.78.0/24 dev eth1 src ppp0 table T1 #ip route add default via ppp0 table T1
ip route add 203.78.165.0/24 dev eth2 src 203.78.165.154 table T2 ip route add default via 203.78.165.153 table T2
# main routing table
ip route add 202.51.78.0/24 dev eth1 src ppp0 ip route add 203.78.165.0/24 dev src 203.78.165.154
# preference for default route
ip route add default via 202.51.76.122
# routing rules
ip rule add from ppp0 table T1
ip rule add from 203.78.165.154 table T2
# entries for local network
ip route add 172.16.100.0/24 dev eth0 table T1 ip route add 203.78.165.0/24 dev eth2 table T1 ip route add 127.0.0.0/8 dev lo table T1 ip route add 172.16.100.0/24 dev eth0 table T2 ip route add 202.51.78.0/24 dev eth1 table T2 ip route add 127.0.0.0/8 dev lo table T2
#load balancing
ip route add default scope global nexthop via ppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
this above one is the full and exact copy of my working....
---------------------------------
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Pls either DELETE your script or save it somewhere else.
and Now, replace your script with this.
AND TRY, if it works.
this is the script.
echo "11 T1" >> /etc/iproute2/rt_tables
echo "12 T2" >> /etc/iproute2/rt_tables
ip route add 202.51.78.0/24 dev eth1 src 202.51.78.122 table T1 ip route add default via ppp0 table T1
ip route add 203.78.165.0/29 <http://203.78.165.0/24> dev eth2 src 203.78.165.154 table T2
ip route add default via 203.78.165.153 table T2
* ip rule add from *202.51.78.122 *table T1
ip rule add from 203.78.165.154 table T2*
ip route add default scope global nexthop via 202.51.78.122 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
THAT'S it. try and let me know.
N-JOY IPROUTE2
Quoted 193 lines · mangal regmi
many many thanks for ur help
ok i m making my problem more clear...my LAN ip is :172.16.100.0/24
ip of eth1 is :202.51.78.122 and this is fixed and permanent address
and it has no netmask and gateway(so, to provide internet
to my LAN i have used the ppp0 for this connection )
ip of eth2 : 203.78.165.154; netmask:255.255.255.248; gateway:
203.78.165.153for eth0 my file is :/etc/sysconfig/network-scripts/ifcfg-eth0 for eth1 :/etc/sysconfig/network-scripts/ifcfg-eth1 for eth2:/etc/sysconfig/network-scripts/ifcfg-eth2
and my rules are placed in
/etc/iproute2/rt_tablesas suggested by lartc.organd the whole copy of my above file is copied below:::>>>
#
# reserved values # #255 local #254 main #253 default #0 unspec # # local # #1 inr.ruhep#
# below this is added by me and above this is by default # two addational routing tables#ip route add 202.51.78.0/24 dev eth1 src ppp0 table T1 #ip route add default via ppp0 table T1
ip route add 203.78.165.0/24 dev eth2 src 203.78.165.154 table T2 ip route add default via 203.78.165.153 table T2# main routing table*ip route add 202.51.78.0/24 dev eth1 src ppp0 ip route add 203.78.165.0/24 dev src 203.78.165.154
# preference for default routeip route add default via 202.51.76.122
# routing rulesip rule add from ppp0 table T1
ip rule add from 203.78.165.154 table T2# entries for local networkip route add 172.16.100.0/24 dev eth0 table T1 ip route add 203.78.165.0/24 dev eth2 table T1 ip route add 127.0.0.0/8 dev lo table T1 ip route add 172.16.100.0/24 dev eth0 table T2 ip route add 202.51.78.0/24 dev eth1 table T2 ip route add 127.0.0.0/8 dev lo table T2#load balancing
ip route add default scope global nexthop via ppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1this above one is the full and exact copy of my working....
Indunil Jayasooriya <[email protected]>
* wrote:Quoted 8 lines · mangal regmi
Hi to all
i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned:
I have fedora core 4 as a linux server. there r two external links connected to this.I there are 2 external links, What is the file
/etc/sysconfig/networklike?Can you witre down the file?
the settings are as: eth0 ->for internal (that is for LAN)
Quoted 6 lines
eth2 ->dsl connection eth1 ->cable line connection( thisconnection has no gateway and netmask address provided so this is connected via ppp0. this is provided from ISP via DHCP but have the fixed ipaddress) Hey, What is this FIXED ip address? Is it a perment address?
YOUR eth0 of Fedora Server is for internal (that is for LAN) YOUR eth2 of Fedora Server is connected to the dsl connection. YOUR eth1 of Fedora Server is connected to the cable line connection. It has a ip.
i want to use these two link to provide the internet in my LAN where there
Quoted 7 lines
are about 8 to 10 computers. i want that if any of the link goes down ...the other should continue the internet ...n also while both the links r up..the
load should be shared between these two links....so that the net conection
and downloads be faster....i have heard about the scripts....that can do this....but i have no idea how to write these...scripts. i need these to be on after reboot also...
To come up the script after the reboot, There are two ways. Either you have to write everytning IN
/etc/rc.d/rc.localor write the script as a seperate file and and make it executable by using chmod.Pls see bellow.
first create the file as follows.
touch
/etc/rc.d/loadbalancingthen , By using vi editor write the script and save it as usual. Then , Make it executable as follows.
chmod 755
/etc/rc.d/loadbalancingand finally add PATH OF THE SCRIPT to
/etc/rc.d/rc.localfile as follows.etc/rc.d/loadbalancing
That's it. Now, whenever you reboot the system, the scripts also comes up with the system.
i tried my best and i also refered the lartc.org ..but i could do a little
Quoted 8 lines
only.
WHAT I DID: it works very well if i connect both of the links and the default path is via ppp0. but suppose if that is(ppp0) disconnected then the dsl connection can handle only upto 15/16 seconds. after that it disconnects . whats the solution ...plzz...as..soon as..possible...help..me...i m in big trouble....
UR SMALL HELP WILL BE A BIG BOON FOR MECOULD YOU PLS write down your RULES . then, I will be able to help you.
Remember that i don't have gateway and netmask of eth1 connection. it has
Quoted 5 lines
ip address only.it is NATed via ppp0. and also my all working are based on lartc.org only...in case of dsl connection i have just replaced the ip and gateways with my ip and gateways....n in case of ppp0 conection i have put ppp0 in the place of gateway n netmask and in place of ip i have given the ip of that link.
The above paragraph is not so clear.
THANKS IN ADVANCE
Quoted 11 lines
------------------------------
Luggage? GPS? Comic books?
Check out fitting gifts for grads
<http://us.rd.yahoo.com/evt=48249/*http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz>at Yahoo! Search._______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc--
Thank you
Indunil Jayasooriya------------------------------
Choose the right car based on your needs. Check out Yahoo! Autos new Car
Finder tool.<http://us.rd.yahoo.com/evt=48518/*http://autos.yahoo.com/carfinder/;_ylc=X3oDMTE3NWsyMDd2BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDY2FyLWZpbmRlcg--+>
Signature · 2 lines
Thank you Indunil Jayasooriya
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 1 line
"ip route add default via ppp0 table T1"
via is not for device name.
After ppp0 is up, type ifconfig and see the gateway,and use that gateway.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Indunil Jayasooriya
Sent: Tuesday, August 21, 2007 7:12 PM
To: mangal regmi; [email protected]
Subject: Re: [LARTC] two providers
Pls either DELETE your script or save it somewhere else.
and Now, replace your script with this.
AND TRY, if it works.
this is the script.
echo "11 T1" >> /etc/iproute2/ rt_tables
echo "12 T2" >> /etc/iproute2/rt_tables
ip route add 202.51.78.0/24 dev eth1 src 202.51.78.122
<http://202.51.78.122/> table T1
ip route add default via ppp0 table T1
ip route add 203.78.165.0/29 <http://203.78.165.0/24> dev eth2 src 203.78.165.154 <http://203.78.165.154/> table T2
ip route add default via 203.78.165.153 <http://203.78.165.153/> table T2
ip rule add from 202.51.78.122 <http://202.51.78.122/> table T1 ip rule add from 203.78.165.154 <http://203.78.165.154/> table T2
ip route add default scope global nexthop via 202.51.78.122
<http://202.51.78.122/> dev eth1 weight 1 nexthop via 203.78.165.153
<http://203.78.165.153/> dev eth2 weight 1
THAT'S it. try and let me know.
N-JOY IPROUTE2
On 8/21/07, mangal regmi <[email protected]> wrote:
many many thanks for ur help
ok i m making my problem more clear...
my LAN ip is :172.16.100.0/24
ip of eth1 is :202.51.78.122 and this is fixed and permanent address
and it has no netmask and gateway(so, to provide
internet to my LAN i have used the ppp0 for this connection ) ip of eth2 : 203.78.165.154; netmask: 255.255.255.248
<http://255.255.255.248> ; gateway:203.78.165.153
for eth0 my file is :/etc/sysconfig/network-scripts/ifcfg-eth0 for eth1 :/etc/sysconfig/network-scripts/ifcfg-eth1 for eth2:/etc/sysconfig/network-scripts/ifcfg-eth2
and my rules are placed in /etc/iproute2/rt_tables as suggested by lartc.org
and the whole copy of my above file is copied below:::>>>
#
# reserved values # #255 local #254 main #253 default #0 unspec # # local # #1 inr.ruhep
#
# below this is added by me and above this is by default # two addational routing tables
#ip route add 202.51.78.0/24 dev eth1 src ppp0 table T1 #ip route add default via ppp0 table T1
ip route add 203.78.165.0/24 <http://203.78.165.0/24> dev eth2 src 203.78.165.154 table T2
ip route add default via 203.78.165.153 table T2
# main routing table
ip route add 202.51.78.0/24 dev eth1 src ppp0 ip route add 203.78.165.0/24 dev src 203.78.165.154
# preference for default route
ip route add default via 202.51.76.122
# routing rules
ip rule add from ppp0 table T1
ip rule add from 203.78.165.154 table T2
# entries for local network
ip route add 172.16.100.0/24 dev eth0 table T1 ip route add 203.78.165.0/24 dev eth2 table T1 ip route add 127.0.0.0/8 dev lo table T1 ip route add 172.16.100.0/24 dev eth0 table T2 ip route add 202.51.78.0/24 dev eth1 table T2 ip route add 127.0.0.0/8 dev lo table T2
#load balancing
ip route add default scope global nexthop via ppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
this above one is the full and exact copy of my working....
Indunil Jayasooriya < <mailto:[email protected]> [email protected]> wrote:
On 8/21/07, mangal regmi <[email protected]> wrote:
Hi to all
i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned:
I have fedora core 4 as a linux server. there r two external links connected to this.
I there are 2 external links, What is the file /etc/sysconfig/network like?
Can you witre down the file?
the settings are as: eth0 ->for internal (that is for LAN)
eth2 ->dsl connection
eth1 ->cable line connection( thisconnection has no gateway and netmask address provided so this is connected via ppp0. this is provided from ISP via DHCP but have the fixed ipaddress) Hey, What is this FIXED ip address? Is it a perment address?
YOUR eth0 of Fedora Server is for internal (that is for LAN) YOUR eth2 of Fedora Server is connected to the dsl connection. YOUR eth1 of Fedora Server is connected to the cable line connection. It has a ip.
i want to use these two link to provide the internet in my LAN where there are about 8 to 10 computers. i want that if any of the link goes down ...the other should continue the internet ...n also while both the
links r up..the load should be shared between these two links....so
that the net conection and downloads be faster....
i have heard about the scripts....that can do this....but i have no idea how to write these...scripts. i need these to be on after reboot also...
To come up the script after the reboot, There are two ways. Either you have to write everytning IN /etc/rc.d/rc.local or write the script as a seperate file and and make it executable by using chmod.
Pls see bellow.
first create the file as follows.
touch /etc/rc.d/loadbalancing
then , By using vi editor write the script and save it as usual. Then , Make it executable as follows.
chmod 755 /etc/rc.d/loadbalancing
and finally add PATH OF THE SCRIPT to /etc/rc.d/rc.local file as follows.
etc/rc.d/loadbalancing
That's it. Now, whenever you reboot the system, the scripts also comes up with the system.
i tried my best and i also refered the lartc.org ..but i could do a little only.
WHAT I DID: it works very well if i connect both of the links and the default path is via ppp0. but suppose if that is(ppp0) disconnected then the dsl connection can handle only upto 15/16 seconds. after that it disconnects . whats the solution ...plzz...as..soon as..possible...help..me...i m in big trouble....
UR SMALL HELP WILL BE A BIG BOON FOR ME
COULD YOU PLS write down your RULES . then, I will be able to help you.
Remember that i don't have gateway and netmask of eth1 connection. it has ip address only.it is NATed via ppp0. and also my all working are based on lartc.org only...in case of dsl connection i have just replaced the ip and gateways with my ip and gateways....n in case of ppp0 conection i have put ppp0 in the place of gateway n netmask and in place of ip i have given the ip of that link.
The above paragraph is not so clear.
THANKS IN ADVANCE
_____
Luggage? GPS? Comic books?
Check out fitting gifts
<http://us.rd.yahoo.com/evt=48249/*http:/search.yahoo.com/search?fr=oni_
on_mail&p=graduation+gifts&cs=bz> for grads at Yahoo! Search.
_______________________________________________
LARTC mailing list
[email protected] <mailto:[email protected]>
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 17 lines
Thank you Indunil Jayasooriya _____ Choose the right car based on your needs. Check out Yahoo! <http://us.rd.yahoo.com/evt=48518/*http:/autos.yahoo.com/carfinder/;_ylc =X3oDMTE3NWsyMDd2BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDY2FyLWZpbmRlcg- -+> Autos new Car Finder tool. -- Thank you Indunil Jayasooriya
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 7 lines · Salim S I
Quoted 2 lines
"ip route add default via ppp0 table T1"
via is not for device name.
YES, THAT'S right. Small error. pls forgive me.
After ppp0 is up, type ifconfig and see the gateway,and use that gateway.
Quoted 1 line
YES, that is right. Pls DO it.
And also , Pls let me rectify the below rule as well
pls pay attnetion to ipaddressofppp0 written in BOLD letters. in the script , I have used the ip address of eth1 (i.e- 202.51.78.122). pls replace that rule with the below rule.
ip route add default scope global nexthop via ipaddressoppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
-----Original Message-----
Quoted 256 lines
*From:* [email protected] [mailto:
[email protected]] *On Behalf Of *Indunil Jayasooriya *Sent:* Tuesday, August 21, 2007 7:12 PM
*To:* mangal regmi; [email protected]
*Subject:* Re: [LARTC] two providersPls either DELETE your script or save it somewhere else.
and Now, replace your script with this.
AND TRY, if it works.
this is the script.
echo "11 T1" >>
/etc/iproute2/rt_tables
echo "12 T2" >>/etc/iproute2/rt_tablesip route add 202.51.78.0/24 dev eth1 src 202.51.78.122 table T1 ip route add default via ppp0 table T1
ip route add 203.78.165.0/29 <http://203.78.165.0/24> dev eth2 src 203.78.165.154 table T2
ip route add default via 203.78.165.153 table T2*ip rule add from *202.51.78.122 *table T1
ip rule add from 203.78.165.154 table T2*ip route add default scope global nexthop via 202.51.78.122 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
THAT'S it. try and let me know.
N-JOY IPROUTE2
On 8/21/07, *mangal regmi* <[email protected]> wrote:
many many thanks for ur help
ok i m making my problem more clear...my LAN ip is :172.16.100.0/24
ip of eth1 is :202.51.78.122 and this is fixed and permanent address
and it has no netmask and gateway(so, to provide internet
to my LAN i have used the ppp0 for this connection )
ip of eth2 : 203.78.165.154; netmask: 255.255.255.248; gateway:
203.78.165.153for eth0 my file is :/etc/sysconfig/network-scripts/ifcfg-eth0 for eth1 :/etc/sysconfig/network-scripts/ifcfg-eth1 for eth2:/etc/sysconfig/network-scripts/ifcfg-eth2
and my rules are placed in
/etc/iproute2/rt_tablesas suggested by lartc.organd the whole copy of my above file is copied below:::>>>
#
# reserved values # #255 local #254 main #253 default #0 unspec # # local # #1 inr.ruhep#
# below this is added by me and above this is by default # two addational routing tables#ip route add 202.51.78.0/24 dev eth1 src ppp0 table T1 #ip route add default via ppp0 table T1
ip route add 203.78.165.0/24 dev eth2 src 203.78.165.154 table T2 ip route add default via 203.78.165.153 table T2# main routing table*ip route add 202.51.78.0/24 dev eth1 src ppp0 ip route add 203.78.165.0/24 dev src 203.78.165.154
# preference for default routeip route add default via 202.51.76.122
# routing rulesip rule add from ppp0 table T1
ip rule add from 203.78.165.154 table T2# entries for local networkip route add 172.16.100.0/24 dev eth0 table T1 ip route add 203.78.165.0/24 dev eth2 table T1 ip route add 127.0.0.0/8 dev lo table T1 ip route add 172.16.100.0/24 dev eth0 table T2 ip route add 202.51.78.0/24 dev eth1 table T2 ip route add 127.0.0.0/8 dev lo table T2#load balancing
ip route add default scope global nexthop via ppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1this above one is the full and exact copy of my working....*
*
Indunil Jayasooriya < [email protected]>*
wrote:
On 8/21/07, *mangal regmi* <[email protected]> wrote:
Hi to all
i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned:
I have fedora core 4 as a linux server. there r two external links connected to this.I there are 2 external links, What is the file */etc/sysconfig/network*like?
Can you witre down the file?
the settings are as: eth0 ->for internal (that is for LAN)
eth2 ->dsl connection eth1 ->cable line connection( this connectionhas no gateway and netmask address provided so this is connected via ppp0. this is provided from ISP via DHCP but have the fixed ipaddress) Hey, What is this FIXED ip address? Is it a perment address?
YOUR eth0 of Fedora Server is for internal (that is for LAN) YOUR eth2 of Fedora Server is connected to the dsl connection. YOUR eth1 of Fedora Server is connected to the cable line connection. It has a ip.
i want to use these two link to provide the internet in my LAN where
there are about 8 to 10 computers. i want that if any of the link goes down ...the other should continue the internet ...n also while both the links r
up..the load should be shared between these two links....so that the net
conection and downloads be faster....i have heard about the scripts....that can do this....but i have no idea how to write these...scripts. i need these to be on after reboot also...
To come up the script after the reboot, There are two ways. Either you have to write everytning IN
/etc/rc.d/rc.localor write the script as a seperate file and and make it executable by using chmod.Pls see bellow.
first create the file as follows.
*touch
/etc/rc.d/loadbalancing*then , By using vi editor write the script and save it as usual. Then , Make it executable as follows.
*
chmod 755/etc/rc.d/loadbalancing*and finally add PATH OF THE SCRIPT to
/etc/rc.d/rc.localfile as follows. *etc/rc.d/loadbalancing*
*
*That's it. Now, whenever you reboot the system, the scripts also comes up with the system.i tried my best and i also refered the lartc.org ..but i could do a little only.
WHAT I DID: it works very well if i connect both of the links and the default path is via ppp0. but suppose if that is(ppp0) disconnected then the dsl connection can handle only upto 15/16 seconds. after that it disconnects . whats the solution ...plzz...as..soon as..possible...help..me...i m in big trouble....
UR SMALL HELP WILL BE A BIG BOON FOR MECOULD YOU PLS write down your RULES . then, I will be able to help you.
Remember that i don't have gateway and netmask of eth1 connection. it has ip address only.it is NATed via ppp0. and also my all working are based on lartc.org only...in case of dsl connection i have just replaced the ip and gateways with my ip and gateways....n in case of ppp0 conection i have put ppp0 in the place of gateway n netmask and in place of ip i have given the ip of that link.
The above paragraph is not so clear.
THANKS IN ADVANCE
------------------------------Luggage? GPS? Comic books?
Check out fitting gifts for grads
<http://us.rd.yahoo.com/evt=48249/*http:/search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz>at
Yahoo! Search._______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc--
Thank you
Indunil Jayasooriya------------------------------
Choose the right car based on your needs. Check out Yahoo! Autos new Car
Finder tool.<http://us.rd.yahoo.com/evt=48518/*http:/autos.yahoo.com/carfinder/;_ylc=X3oDMTE3NWsyMDd2BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDY2FyLWZpbmRlcg--+>--
Thank you
Indunil Jayasooriya
Signature · 2 lines
Thank you Indunil Jayasooriya
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc