CBQ problem
this is my CBQ configuration:
DEV=eth1
tc qdisc del dev $DEV root
tc qdisc add dev $DEV root handle 1: cbq avpkt 100 bandwidth 10Mbit cell 8 tc class add dev $DEV parent 1: classid 1:1 cbq rate 10kbit allot 1500 prio 1 cell 8 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:10 cbq rate 1Mbit allot 1500 prio 2 avpkt 15 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:20 cbq rate 7Mbit allot 1500 prio 2 avpkt 60 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:30 cbq rate 200kbit allot 1500 prio 2 avpkt 60 bounded isolated
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10
tc filter add dev $DEV parent 1: protocol ip prio 1 u32 match u8 0x00 0x00 at 0 flowid 1:30
tc filter add dev $DEV parent 1: protocol qroute_uni prio 2 u32 match u8 0x40 0xff at 14 flowid 1:20
tc filter add dev $DEV parent 1: protocol qroute_multi prio 3 u32 match u8 0x40 0xff at 14 flowid 1:20
tc filter add dev $DEV parent 1: protocol qroute_uni prio 4 u32 match u8 0x00 0x00 at 14 flowid 1:10
tc filter add dev $DEV parent 1: protocol qroute_multi prio 5 u32 match u8 0x00 0x00 at 14 flowid 1:10
I want to shape class 1:1 to 10kbit, but it is not successfull. As I know when class 1:1 is shaped to 10Kbits, its children, can not exceed it, even if the child's rate is more than class 1:1. But After I applied this tc configuration, I notice that the bandwidth of class 1:30 is around 200Kbit (not shape to less than 10Kbit). anyone can help me?
-----------------------------------------
This email was sent using SquirrelMail.
"Webmail for nuts!"
http://squirrelmail.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Some one told me that "bounded", and "isolated" don't work sometimes, is it true?
----- Original Message -----
From: "Liu Zhiyong" <[email protected]>
To: <[email protected]>
Sent: Thursday, March 13, 2003 12:49 PM
Subject: [LARTC] CBQ problem
Quoted 6 lines
this is my CBQ configuration:
DEV=eth1
tc qdisc del dev $DEV root
tc qdisc add dev $DEV root handle 1: cbq avpkt 100 bandwidth 10Mbit cell 8 tc class add dev $DEV parent 1: classid 1:1 cbq rate 10kbit allot 1500
prio
Quoted 2 lines
1 cell 8 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:10 cbq rate 1Mbit allot 1500
prio
Quoted 2 lines
2 avpkt 15 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:20 cbq rate 7Mbit allot 1500
prio
Quoted 32 lines
2 avpkt 60 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:30 cbq rate 200kbit allot 1500 prio 2 avpkt 60 bounded isolated
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10
tc filter add dev $DEV parent 1: protocol ip prio 1 u32 match u80x000x00at 0 flowid 1:30
tc filter add dev $DEV parent 1: protocolqroute_uniprio 2 u32 match u80x400xffat 14 flowid 1:20
tc filter add dev $DEV parent 1: protocolqroute_multiprio 3 u32 match u80x400xffat 14 flowid 1:20
tc filter add dev $DEV parent 1: protocolqroute_uniprio 4 u32 match u80x000x00at 14 flowid 1:10
tc filter add dev $DEV parent 1: protocolqroute_multiprio 5 u32 match u80x000x00at 14 flowid 1:10I want to shape class 1:1 to 10kbit, but it is not successfull. As I know when class 1:1 is shaped to 10Kbits, its children, can not exceed it, even if the child's rate is more than class 1:1. But After I applied this tc configuration, I notice that the bandwidth of class 1:30 is around 200Kbit (not shape to less than 10Kbit). anyone can help me?
-----------------------------------------
This email was sent using SquirrelMail.
"Webmail for nuts!"
http://squirrelmail.org/
Quoted 4 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Liu Zhiyong
Some one told me that "bounded", and "isolated" don't work sometimes, is it true?
Yes. You better remove all the isolated parameters.
I did some tests. You can find the results on www.docum.org on the test page. I don't have a direct link available to the page with the results.
Stef
Quoted 65 lines
----- Original Message -----
From: "Liu Zhiyong" <[email protected]>
To: <[email protected]>
Sent: Thursday, March 13, 2003 12:49 PM
Subject: [LARTC] CBQ problemQuoted 6 lines
this is my CBQ configuration:
DEV=eth1
tc qdisc del dev $DEV root
tc qdisc add dev $DEV root handle 1: cbq avpkt 100 bandwidth 10Mbit cell 8 tc class add dev $DEV parent 1: classid 1:1 cbq rate 10kbit allot 1500prio
Quoted 2 lines
1 cell 8 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:10 cbq rate 1Mbit allot 1500prio
Quoted 2 lines
2 avpkt 15 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:20 cbq rate 7Mbit allot 1500prio
Quoted 32 lines
2 avpkt 60 bounded isolated
tc class add dev $DEV parent 1:1 classid 1:30 cbq rate 200kbit allot 1500 prio 2 avpkt 60 bounded isolated
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10 tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10 tc filter add dev $DEV parent 1: protocol ip prio 1 u32 match u80x000x00at 0 flowid 1:30
tc filter add dev $DEV parent 1: protocolqroute_uniprio 2 u32 match u80x400xffat 14 flowid 1:20
tc filter add dev $DEV parent 1: protocolqroute_multiprio 3 u32 match u80x400xffat 14 flowid 1:20
tc filter add dev $DEV parent 1: protocolqroute_uniprio 4 u32 match u80x000x00at 14 flowid 1:10
tc filter add dev $DEV parent 1: protocolqroute_multiprio 5 u32 match u80x000x00at 14 flowid 1:10I want to shape class 1:1 to 10kbit, but it is not successfull. As I know when class 1:1 is shaped to 10Kbits, its children, can not exceed it, even if the child's rate is more than class 1:1. But After I applied this tc configuration, I notice that the bandwidth of class 1:30 is around 200Kbit (not shape to less than 10Kbit). anyone can help me?
-----------------------------------------
This email was sent using SquirrelMail.
"Webmail for nuts!"
http://squirrelmail.org/Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
[LARTC] CBQ Problem
In reply to Liu ZhiyongHi.
I want to shape traffic from some IPs in my lan, but I'm w/ trouble. I have a linux box connected to the Internet. In the other side of this box is my LAN. I want to create the following scenario:
My root qdisc is attached to a 100Mbit/s NIC
I want to create a class attached to this qdisc that will limit the traffic at 384Kbit/s. I want to create two leaf classes that limits the traffic at 256Kbit/s.
I want to attach two sfq qdiscs so two classes are treated equally.
I want to put one LAN IP for each leaf class.
When one IP is downloading a file from internet it will never be more than 256Kbit. When both IPs is downloading files at the same time, they will never be more than 384Kbit.
(I think that is something like the webserver + smtp example that is in the howto)
My config:
tc qdisc add dev eth1 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8
tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate 384Kbit weight 38Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
tc class add dev eth1 parent 1:1 classid 1:10 cbq bandwidth 100Mbit rate 256Kbit weight 25Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 tc class add dev eth1 parent 1:1 classid 1:20 cbq bandwidth 100Mbit rate 256Kbit weight 25Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000
tc qdisc add dev eth1 parent 1:10 handle 100: sfq
tc qdisc add dev eth1 parent 1:20 handle 200: sfq
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.0.0.2/32 flowid 1:10 tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.0.0.3/32 flowid 1:20
When I start a download from one machine, the speed is limited at 256Kbit/s (this is OK)
When I start a download from both machines, the speed for each machine is limited to 256Kbit/s. They are getting 512Kbit/s together. I want limit this speed at 384Kbit/s, so traffic from each machine will never be more than 192Kbps when both are in use.
Why it is not working for me ??? What is the mistake ? Thank You.
Ricardo