Modifying U-Boot
Hi,
when modifying u-boot for a custom design board, is schematic of the board is required?
i have datasheet of the board that explain memory map, bridge and cpu type, ex. is this datasheet sufficient to modify u-boot? if schematic is required, what are names of u-boot source files that must be modifyed according to schematic?
Best regards,
Mustafa
Quoted 3 lines · In message <[email protected]> you wrote:
Quoted 1 line
when modifying u-boot for a custom design board, is schematic of the board is required?
This depends on the quality and level of datail of the other documen- tation you have. I prefer to be able to verify this form the schematics (which usually is more up-to-date than all text docs, too).
Quoted 2 lines
i have datasheet of the board that explain memory map, bridge and cpu type, ex. is this datasheet sufficient to modify u-boot?
Maybe, maybe not. I don't know your board. Does your documentation explain the use of all port pins, clock routing, how to reset the PHY etc.?
Quoted 2 lines
if schematic is required, what are names of u-boot source files that must be modifyed according to schematic?
It depends...
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The goal of science is to build better mousetraps. The goal of nature is to build better mice.