Skip to contentSkip to conversation

Cpu frequency scaling

DISCUSSION Ralf Baechle 3 participants 3 messages Jan 12, 2003 – Jan 13, 2003 1 message not in the archive MIPS

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 10 lines · Krishnakumar. R

Can frequency scaling (through software)
be done on mips using linux ?

Is such a feature feasible in mips ??

I could not find any documentation nor patches
for frequency
scaling on mips at
http://www.brodo.de/cpufreq/
:-(

None of the currently supported MIPS CPUs support such a feature in hardware as such our support is already complete and by definition bug free ;-)

Ralf

#2 lore raw
Quoted 11 lines
Quoted 10 lines

Can frequency scaling (through software)
be done on mips using linux ?

Is such a feature feasible in mips ??

I could not find any documentation nor patches
for frequency
scaling on mips at
http://www.brodo.de/cpufreq/
:-(

Quoted 3 lines

None of the currently supported MIPS CPUs support such a feature in hardware as such our support is already complete and by definition bug free ;-)

Actually, that's not *quite* true. A number of MIPS CPUs and cores that are otherwise supported by Linux (e.g. 4K, 5K) have a "reduced power" mode which is modulated by the CP0 "RP" bit. In general, this bit does nothing in the CPU itself, however. It was intended that it be connected to system-level logic for frequency scaling (1/n normal clock, or CPU=Bus). So on most systems it does nothing, and on the ones where it does do something, it's entirely system dependent. I don't have an Alchemy AU1000 spec handy, but since they've integrated a lot of other logic with their CPU, and since they designed their component to go into low-power devices, it wouldn't surprise me in the least if they do something well-defined with the RP bit.

So, to get back to the original question, something highly platform dependent *could* be done using MIPS/Linux, via /proc/cpu or some kind of system call, but I don't believe anyone has made such a hook generally available as yet.

Kevin K.

#3 lore raw
Quoted 15 lines · Kevin D. Kissell
Quoted 11 lines
Quoted 10 lines

Can frequency scaling (through software)
be done on mips using linux ?

Is such a feature feasible in mips ??

I could not find any documentation nor patches
for frequency
scaling on mips at
http://www.brodo.de/cpufreq/
:-(

Quoted 3 lines

None of the currently supported MIPS CPUs support such a feature in hardware as such our support is already complete and by definition bug free ;-)

Quoted 13 lines

Actually, that's not *quite* true. A number of MIPS CPUs and cores that are otherwise supported by Linux (e.g. 4K, 5K) have a "reduced power" mode which is modulated by the CP0 "RP" bit. In general, this bit does nothing in the CPU itself, however. It was intended that it be connected to system-level logic for frequency scaling (1/n normal clock, or CPU=Bus). So on most systems it does nothing, and on the ones where it does do something, it's entirely system dependent. I don't have an Alchemy AU1000 spec handy, but since they've integrated a lot of other logic with their CPU, and since they designed their component to go into low-power devices, it wouldn't surprise me in the least if they do something well-defined with the RP bit.

Actually the Au1x CPUs support both, frequency and voltage scaling.

Quoted 4 lines

So, to get back to the original question, something highly platform dependent *could* be done using MIPS/Linux, via /proc/cpu or some kind of system call, but I don't believe anyone has made such a hook generally available as yet.

For the Au1x CPUs, I had added a /proc interface that allows you to do something like "echo 192 > /proc/cpufreq" to reduce the frequency from 396 MHz to 192, or whatever number you chose, but the implementation was very adhoc and probably not generally useful for other CPUs. IBM and MontaVista recently published a whitepaper on power management that's designed to be arch independent. The design considers not only CPU scaling but scaling of all the buses as well, which I don't think the cpufreq project takes into account.

Pete