Advanced TCA Disk Hotswap support in Linux Kernel [qla2300 2/2]

lkml,

I am developing the Linux kernel support required to support Advanced TCA
(PICMG 3.0) architecture. Advanced TCA is a technology where boards exist
in a chassis and can either be processor nodes or storage nodes. All blades in the chassis are connected by FibreChannel and Ethernet. The blades can be hot added or hot removed while the Linux processor nodes are
active, meaning that the SCSI subsystem must add devices on insertion requests and remove devices on ejection requests.

This second patch is a FibreChannel driver that is modified to support SCSI
Hotswap driver previously posted.

Regards,
-steve

diff -uNr linux-campbell/drivers/scsi/qla2xxx/qla2x00.c linux-scsi-hotswap/drivers/scsi/qla2xxx/qla2x00.c
--- linux-campbell/drivers/scsi/qla2xxx/qla2x00.c Fri Jun 21
20:56:35 2002
+++ linux-scsi-hotswap/drivers/scsi/qla2xxx/qla2x00.c Mon Jul 8
18:53:05 2002
@@ -244,6 +244,7 @@
STATIC uint8_t qla2x00_register_with_Linux(scsi_qla_host_t *ha,
uint8_t maxchannels);
STATIC int qla2x00_done(scsi_qla_host_t *);
STATIC void qla2x00_select_queue_depth(struct Scsi_Host *, Scsi_Device
*);
+int qla2x00_get_scsi_info_from_wwn (int mode, unsigned long long wwn, +int *host, int *channel, int *lun, int *id);

STATIC void
qla2x00_timer(scsi_qla_host_t *);
@@ -2036,6 +2037,9 @@
host->can_queue = max_srbs; /* default value:-MAX_SRBS(4096)
*/
host->cmd_per_lun = 1;
host->select_queue_depths = qla2x00_select_queue_depth;
+ host->hostt->get_scsi_info_from_wwn =
qla2x00_get_scsi_info_from_wwn;
+
+
host->n_io_port = 0xFF;

#if MEMORY_MAPPED_IO
@@ -3981,6 +3985,80 @@
device->queue_depth);
}

+}
+
+union wwnmap {
+ unsigned long long wwn;
+ unsigned char wwn_u8[8];
+};
+
+int qla2x00_get_scsi_info_from_wwn (int mode,
+ unsigned long long wwn,
+ int *host,
+ int *channel,
+ int *lun,
+ int *id) {
+
+scsi_qla_host_t *list;
+Scsi_Device *scsi_device;
+union wwnmap wwncompare;
+union wwnmap wwncompare2;
+int i, j, k;
+
+ /*
+ * Retrieve big endian version of world wide name
+ */
+ wwncompare2.wwn = wwn;
+ for (j = 0, k=7; j < 8; j++, k--) {
+ wwncompare.wwn_u8[j] = wwncompare2.wwn_u8[k];
+ }
+
+ /*
+ * query all hosts searching for WWN
+ */
+ for (list = qla2x00_hostlist; list; list = list->next) {
+ for (i = 0; i < MAX_FIBRE_DEVICES; i++) {
+ /*
+ * Scan all devices in FibreChannel database
+ * if WWN match found, return SCSI device
information
+ */
+ if (memcmp (wwncompare.wwn_u8,
list->fc_db[i].wwn, 8) == 0) {
+ /*
+ * If inserting, avoid scan for channel
and lun information
+ */
+ if (mode == 0) {
+ *channel = 0;
+ *lun = 0;
+ *host = list->host->host_no;
+ *id = i;
+ return (0);
+ }
+
+
+ /*
+ * WWN matches, find channel and lun
information from scsi
+ * device
+ */
+ for (scsi_device =
list->host->host_queue; scsi_device; scsi_device = scsi_device->next) {
+ if (scsi_device->id == i) {
+ *channel =
scsi_device->channel;
+ *lun = scsi_device->lun;
+ break;
+ }
+ }
+ if (scsi_device == 0) {
+ return (-ENOENT);
+ }
+ /*
+ * Device found, return all data
+ */
+ *host = list->host->host_no;
+ *id = i;
+ return (0);
+ } /* memcmp */
+ } /* i < MAXFIBREDEVICES */
+ }
+ return (-ENOENT);
}

/***********************************************************************
***