Skip to contentSkip to conversation

3.10 kernel: [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1).

DISCUSSION Justin Piszcz 2 participants 4 messages Jul 2, 2013

lore
Share & tools
lore
#0 lore raw

Hello,

I use an ATI graphics card (PCI-e x1) for a server:
Card: [AMD/ATI] Park [Mobility Radeon HD 5430]

I upgraded my kernel from 3.9.x to 3.10, after rebooting I found the driver now wants a new firmware:
radeon 0000:05:00.0: radeon_uvd: Can't load firmware "radeon/CYPRESS_uvd.bin"

I pulled the latest firmware down (and also updated the others) and rebooted:
CONFIG_EXTRA_FIRMWARE="radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CYPRESS_uvd.bin"

Then have this issue:
[drm] radeon: irq initialized.
[drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1).

The screen goes black for ~5 seconds and then come back on. Not sure if this has been reported or not (w/CEDAR chipset) but FYI.

Kernel config:
http://home.comcast.net/~jpiszcz/20130702/config-3.10-4.txt

Full dmesg:
http://home.comcast.net/~jpiszcz/20130702/full-dmesg.txt

Possibly related:
http://lists.opensuse.org/opensuse-bugs/2013-06/msg00053.html
https://bugzilla.novell.com/show_bug.cgi?id=822777
https://bugzilla.novell.com/show_bug.cgi?id=822777#c0
http://www.mail-archive.com/[email protected]/msg38066.html
https://bugs.freedesktop.org/show_bug.cgi?id=63935

Snippet:

[    2.033535] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    3.053742] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    4.073985] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    5.094192] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    6.114405] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    7.134611] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    8.154824] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    9.175044] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[   10.195251] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[   11.215464] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[   11.235537] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!!
[   11.235607] [drm:evergreen_startup] *ERROR* radeon: error initializing

UVD (-1).

Justin.

#1 lore raw
Quoted 15 lines · Justin Piszcz

Hello,

I use an ATI graphics card (PCI-e x1) for a server:
Card: [AMD/ATI] Park [Mobility Radeon HD 5430]

I upgraded my kernel from 3.9.x to 3.10, after rebooting I found the driver now wants a new firmware:
radeon 0000:05:00.0: radeon_uvd: Can't load firmware "radeon/CYPRESS_uvd.bin"

I pulled the latest firmware down (and also updated the others) and rebooted:
CONFIG_EXTRA_FIRMWARE="radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CYPRESS_uvd.bin"

Quoted 6 lines

Then have this issue:
[drm] radeon: irq initialized.
[drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1).

The screen goes black for ~5 seconds and then come back on. Not sure if this has been reported or not (w/CEDAR chipset) but FYI.

Make sure you have the the latest CEDAR_rlc.bin in addition to CYPRESS_uvd.bin and make sure the latest images are available in your initrd or kernel image, etc.

Alex

Quoted 45 lines

Kernel config:
http://home.comcast.net/~jpiszcz/20130702/config-3.10-4.txt

Full dmesg:
http://home.comcast.net/~jpiszcz/20130702/full-dmesg.txt

Possibly related:
http://lists.opensuse.org/opensuse-bugs/2013-06/msg00053.html
https://bugzilla.novell.com/show_bug.cgi?id=822777
https://bugzilla.novell.com/show_bug.cgi?id=822777#c0
http://www.mail-archive.com/[email protected]/msg38066.html
https://bugs.freedesktop.org/show_bug.cgi?id=63935

Snippet:

[    2.033535] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    3.053742] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    4.073985] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    5.094192] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    6.114405] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    7.134611] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    8.154824] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[    9.175044] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[   10.195251] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[   11.215464] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to
reset the VCPU!!!
[   11.235537] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!!
[   11.235607] [drm:evergreen_startup] *ERROR* radeon: error initializing

UVD (-1).

Justin.

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

#2 lore raw

-----Original Message-----
From: Alex Deucher [mailto:[email protected]]
Sent: Tuesday, July 02, 2013 2:36 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: 3.10 kernel: [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1).

Quoted 2 lines

The screen goes black for ~5 seconds and then come back on. Not sure if this has been reported or not (w/CEDAR chipset) but FYI.

Make sure you have the the latest CEDAR_rlc.bin in addition to CYPRESS_uvd.bin and make sure the latest images are available in your initrd or kernel image, etc.

Alex

--

Hi,

Even with the latest (confirmed below) and built-in to the kernel:

$ git clone
git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
Cloning into 'linux-firmware'...
remote: Counting objects: 2210, done.
remote: Compressing objects: 100% (1102/1102), done.
remote: Total 2210 (delta 1123), reused 2113 (delta 1073)
Receiving objects: 100% (2210/2210), 39.84 MiB | 6.49 MiB/s, done.
Resolving deltas: 100% (1123/1123), done.
$ date
Tue Jul  2 14:39:19 EDT 2013
2b244d41832f46382bfbb8994522dcdd  d/linux-firmware/radeon/CEDAR_me.bin
23915e382ea0d2f2491a19146ca3001c  d/linux-firmware/radeon/CEDAR_pfp.bin
e8770d3d588f24dc6f1a8609c9db3467  d/linux-firmware/radeon/CEDAR_rlc.bin
fb23b281dcc94a035d374e709c9842bd  d/linux-firmware/radeon/CYPRESS_uvd.bin

Current system firmware (/lib/firmware/radeon):

$ for i in $CONFIG_EXTRA_FIRMWARE; do md5sum $i; done
2b244d41832f46382bfbb8994522dcdd  radeon/CEDAR_me.bin
23915e382ea0d2f2491a19146ca3001c  radeon/CEDAR_pfp.bin
e8770d3d588f24dc6f1a8609c9db3467  radeon/CEDAR_rlc.bin
fb23b281dcc94a035d374e709c9842bd  radeon/CYPRESS_uvd.bin

CONFIG_EXTRA_FIRMWARE="radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CYPRESS_uvd.bin"

Same issue.

Justin.

#3 lore raw
Quoted 48 lines · Justin Piszcz

-----Original Message-----
From: Alex Deucher [mailto:[email protected]]
Sent: Tuesday, July 02, 2013 2:36 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: 3.10 kernel: [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1).

Quoted 2 lines

The screen goes black for ~5 seconds and then come back on. Not sure if this has been reported or not (w/CEDAR chipset) but FYI.

Make sure you have the the latest CEDAR_rlc.bin in addition to CYPRESS_uvd.bin and make sure the latest images are available in your initrd or kernel image, etc.

Alex

--

Hi,

Even with the latest (confirmed below) and built-in to the kernel:

$ git clone
git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
Cloning into 'linux-firmware'...
remote: Counting objects: 2210, done.
remote: Compressing objects: 100% (1102/1102), done.
remote: Total 2210 (delta 1123), reused 2113 (delta 1073)
Receiving objects: 100% (2210/2210), 39.84 MiB | 6.49 MiB/s, done.
Resolving deltas: 100% (1123/1123), done.
$ date
Tue Jul  2 14:39:19 EDT 2013
2b244d41832f46382bfbb8994522dcdd  d/linux-firmware/radeon/CEDAR_me.bin
23915e382ea0d2f2491a19146ca3001c  d/linux-firmware/radeon/CEDAR_pfp.bin
e8770d3d588f24dc6f1a8609c9db3467  d/linux-firmware/radeon/CEDAR_rlc.bin
fb23b281dcc94a035d374e709c9842bd  d/linux-firmware/radeon/CYPRESS_uvd.bin

Current system firmware (/lib/firmware/radeon):

$ for i in $CONFIG_EXTRA_FIRMWARE; do md5sum $i; done
2b244d41832f46382bfbb8994522dcdd  radeon/CEDAR_me.bin
23915e382ea0d2f2491a19146ca3001c  radeon/CEDAR_pfp.bin
e8770d3d588f24dc6f1a8609c9db3467  radeon/CEDAR_rlc.bin
fb23b281dcc94a035d374e709c9842bd  radeon/CYPRESS_uvd.bin
Quoted 4 lines

CONFIG_EXTRA_FIRMWARE="radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CYPRESS_uvd.bin"

Same issue.

Please open a bug (product: DRI, component: DRM/Radeon):
https://bugs.freedesktop.org
and attach your dmesg output and xorg log.

Alex