Skip to contentSkip to conversation

masquerading

DISCUSSION Esteban 5 participants 5 messages Feb 24, 2003

lore
Share & tools
lore

Esteban

author
#0 lore raw

hello,
im masquerading my local network like this by now:
iptables -t nat -A POSTROUTING -o eth2 -j MASQUERADE everything works fine.
but, now i added another internet gw (ppp0) wich is balanced (iproute2) with eth2.
how do i set the masquerading to balance both gws? (eth2 and ppp0) ? thanks in advance
Steve

#1 lore raw

Hi

AFAIK

set another rule with ppp0 instead of eth2
i think it should work

hare
----- Original Message -----
From: "Esteban" <[email protected]>
To: <[email protected]>
Sent: Monday, February 24, 2003 2:20 PM
Subject: masquerading

Quoted 13 lines

hello,
im masquerading my local network like this by now:
iptables -t nat -A POSTROUTING -o eth2 -j MASQUERADE everything works fine.
but, now i added another internet gw (ppp0) wich is balanced (iproute2) with eth2.
how do i set the masquerading to balance both gws? (eth2 and ppp0) ? thanks in advance
Steve

#2 lore raw

thanks for the tip..but
ive tryed that, but the second rule does not match..any ther idea? another:
is any diference on doing -j snat --to--source {internet ip} and give {internet ip} two values or something like that? instead -j masquerade? thanks again

Quoted 31 lines · hare ram

Hi

AFAIK

set another rule with ppp0 instead of eth2
i think it should work

hare
----- Original Message -----
From: "Esteban" <[email protected]>
To: <[email protected]>
Sent: Monday, February 24, 2003 2:20 PM
Subject: masquerading

Quoted 13 lines

hello,
im masquerading my local network like this by now:
iptables -t nat -A POSTROUTING -o eth2 -j MASQUERADE everything works fine.
but, now i added another internet gw (ppp0) wich is balanced (iproute2) with eth2.
how do i set the masquerading to balance both gws? (eth2 and ppp0) ? thanks in advance
Steve

#3 lore raw

DirecPC on Linux

In reply to hare ram

I'm just wondering if anyone here has any experience with DirecPC on Linux. We are unable to get any connection to the Internet at one of our locations, with the exception of satellite and dial-up. Everyone at DirecPC claims their satellite modems have to connected to a Windows machine. I am now getting the impression from some Linux people that DirecPC on Linux is possible, however.

Chris

========================================
Chris Baker -- technical specialist
614-839-2447x108
[email protected]
Big Brothers Big Sisters
Association of Central Ohio
www.bbbscentralohio.org

#4 lore raw

Re: DirecPC on Linux

I've been in communication with http://www.groundcontrol.com. They offer several add-on boxes that are OS-independent for Direcway two-way systems. The option I've been looking at is the 4020 box which connects to the current satellite modem and is a routher and switch that would allow connection of a linux server or network.

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Monday, February 24, 2003 5:50 AM
Subject: DirecPC on Linux

Quoted 19 lines

I'm just wondering if anyone here has any experience with DirecPC on Linux. We are unable to get any connection to the Internet at one of our locations, with the exception of satellite and dial-up. Everyone at DirecPC claims their satellite modems have to connected to a Windows machine. I am now getting the impression from some Linux people that DirecPC on Linux is possible, however.

Chris

========================================
Chris Baker -- technical specialist
614-839-2447x108
[email protected]
Big Brothers Big Sisters
Association of Central Ohio
www.bbbscentralohio.org