Skip to contentSkip to conversation

Patch for supporting CPR register in 16C950 UART

DISCUSSION [email protected] 1 participant 1 message May 18, 2001

lore
Share & tools
lore
#0 lore raw

Hello.

Here is a patch (tested on kernels 2.4.3 and 2.4.4) that adds 2 ioctl's in serial.c. One, TCSSERCPR, sets the CPR register in 16C950 UARTs. This register is a pre-scaler (that is, a divisor) for the clock. If the value is N, the clock is divided by N/8. If N<8, pre-scaling is disabled by setting bit 7 of MCR to 0. The other one, TCGSERCPR,, reads the value of CPR. If pre-scaling is disabled, it returns 8 (i.e., the clock frequency is left intact).

The patch also disables resetting the UART via the CSR register every time the serial device is opened (in the startup() function). This would reset the content of CPR.
---------------------------------------------------------

Fabrizio Gennari          tel. +39 039 203 7816
Philips Research Monza    fax. +39 039 203 7800
via G. Casati 23          [email protected]
20052 Monza (MI) Italy    http://www.research.philips.com