wireless: use dev_get_platdata()
Subsystems (4)
PATCH 1/1 wireless: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/ath/ath5k/ahb.c | 15 ++++++--------- drivers/net/wireless/ath/ath9k/ahb.c | 4 ++-- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 2 +- drivers/net/wireless/cw1200/cw1200_spi.c | 4 ++-- drivers/net/wireless/libertas/if_spi.c | 2 +- drivers/net/wireless/ti/wl1251/spi.c | 2 +- drivers/net/wireless/ti/wl12xx/main.c | 2 +- drivers/net/wireless/ti/wlcore/main.c | 2 +- drivers/net/wireless/ti/wlcore/spi.c | 2 +- 9 files changed, 16 insertions(+), 19 deletions(-)
PATCH 1/8 wireless: ath5k: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/ath/ath5k/ahb.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/net/wireless/ath/ath5k/ahb.c +6 -9
@@ -37,12 +37,9 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) {struct ath5k_hw *ah = common->priv;struct platform_device *pdev =to_platform_device (ah->dev); -struct ar231x_board_config *bcfg = pdev->dev.platform_data; +struct ar231x_board_config *bcfg =dev_get_platdata (&pdev->dev);u16 *eeprom, *eeprom_end; - - - bcfg = pdev->dev.platform_data; eeprom = (u16 *) bcfg->radio; eeprom_end = ((void *) bcfg->config) +BOARD_CONFIG_BUFSZ ;
@@ -57,7 +54,7 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)int ath5k_hw_read_srev (struct ath5k_hw *ah) {struct platform_device *pdev =to_platform_device (ah->dev); -struct ar231x_board_config *bcfg = pdev->dev.platform_data; +struct ar231x_board_config *bcfg =dev_get_platdata (&pdev->dev); ah->ah_mac_srev = bcfg->devid;return 0 ; }
@@ -65,7 +62,7 @@ int ath5k_hw_read_srev(struct ath5k_hw *ah)static int ath5k_ahb_eeprom_read_mac (struct ath5k_hw *ah,u8 *mac) {struct platform_device *pdev =to_platform_device (ah->dev); -struct ar231x_board_config *bcfg = pdev->dev.platform_data; +struct ar231x_board_config *bcfg =dev_get_platdata (&pdev->dev);u8 *cfg_mac;if (to_platform_device (ah->dev)->id ==0 )
@@ -87,7 +84,7 @@ static const struct ath_bus_ops ath_ahb_bus_ops = {/*Initialization*/ static int ath_ahb_probe (struct platform_device *pdev) { -struct ar231x_board_config *bcfg = pdev->dev.platform_data; +struct ar231x_board_config *bcfg =dev_get_platdata (&pdev->dev);struct ath5k_hw *ah;struct ieee80211_hw *hw;struct resource *res;
@@ -96,7 +93,7 @@ static int ath_ahb_probe(struct platform_device *pdev)int ret =0 ;u32 reg; -if (!pdev->dev.platform_data) { +if (!dev_get_platdata (&pdev->dev)) {dev_err (&pdev->dev,"no platform data specified\n" ); ret = -EINVAL ; goto err_out;
@@ -193,7 +190,7 @@ static int ath_ahb_probe(struct platform_device *pdev)static int ath_ahb_remove (struct platform_device *pdev) { -struct ar231x_board_config *bcfg = pdev->dev.platform_data; +struct ar231x_board_config *bcfg =dev_get_platdata (&pdev->dev);struct ieee80211_hw *hw =platform_get_drvdata (pdev);struct ath5k_hw *ah;u32 reg;
Signature · 1 line
1.7.10.4
PATCH 2/8 wireless: ath9k: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/ath/ath9k/ahb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath9k/ahb.c +2 -2
@@ -54,7 +54,7 @@ static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)struct platform_device *pdev =to_platform_device (sc->dev);struct ath9k_platform_data *pdata; - pdata = (struct ath9k_platform_data *) pdev->dev.platform_data; + pdata =dev_get_platdata (&pdev->dev);if (off >= (ARRAY_SIZE (pdata->eeprom_data))) { ath_err(common, "%s: flash read failed, offset %08x is out of range\n",
@@ -84,7 +84,7 @@ static int ath_ahb_probe(struct platform_device *pdev)struct ath_hw *ah;char hw_name[64 ]; -if (!pdev->dev.platform_data) { +if (!dev_get_platdata (&pdev->dev)) {dev_err (&pdev->dev,"no platform data specified\n" );return -EINVAL ; }
Signature · 1 line
1.7.10.4
PATCH 3/8 wireless: brcmfmac: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +1 -1
@@ -468,7 +468,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev)brcmf_dbg (SDIO ,"Enter\n" ); - brcmfmac_sdio_pdata = pdev->dev.platform_data; + brcmfmac_sdio_pdata =dev_get_platdata (&pdev->dev);if (brcmfmac_sdio_pdata->power_on) brcmfmac_sdio_pdata->power_on ();
Signature · 1 line
1.7.10.4
PATCH 4/8 wireless: cw1200: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/cw1200/cw1200_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/cw1200/cw1200_spi.c +2 -2
@@ -355,7 +355,7 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = {static int cw1200_spi_probe (struct spi_device *func) {const struct cw1200_platform_data_spi *plat_data = - func->dev.platform_data; +dev_get_platdata (&func->dev);struct hwbus_priv *self;int status;
@@ -431,7 +431,7 @@ static int cw1200_spi_disconnect(struct spi_device *func) }kfree (self); } -cw1200_spi_off (func->dev.platform_data); +cw1200_spi_off (dev_get_platdata (&func->dev));return 0 ; }
Signature · 1 line
1.7.10.4
PATCH 5/8 wireless: libertas: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/libertas/if_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/libertas/if_spi.c +1 -1
@@ -1128,7 +1128,7 @@ static int if_spi_probe(struct spi_device *spi) {struct if_spi_card *card;struct lbs_private *priv =NULL ; -struct libertas_spi_platform_data *pdata = spi->dev.platform_data; +struct libertas_spi_platform_data *pdata =dev_get_platdata (&spi->dev);int err =0 ;lbs_deb_enter (LBS_DEB_SPI );
Signature · 1 line
1.7.10.4
PATCH 6/8 wireless: wl1251: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/ti/wl1251/spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ti/wl1251/spi.c +1 -1
@@ -243,7 +243,7 @@ static int wl1251_spi_probe(struct spi_device *spi)struct wl1251 *wl;int ret; - pdata = spi->dev.platform_data; + pdata =dev_get_platdata (&spi->dev);if (!pdata) {wl1251_error ("no platform data" );return -ENODEV ;
Signature · 1 line
1.7.10.4
PATCH 7/8 wireless: wlcore: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/ti/wlcore/main.c | 2 +- drivers/net/wireless/ti/wlcore/spi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/ti/wlcore/main.c +1 -1
@@ -5900,7 +5900,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) {struct wl1271 *wl = context;struct platform_device *pdev = wl->pdev; -struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data; +struct wlcore_platdev_data *pdev_data =dev_get_platdata (&pdev->dev);struct wl12xx_platform_data *pdata = pdev_data->pdata;unsigned long irqflags;int ret;
drivers/net/wireless/ti/wlcore/spi.c +1 -1
@@ -335,7 +335,7 @@ static int wl1271_probe(struct spi_device *spi)if (!pdev_data) goto out; - pdev_data->pdata = spi->dev.platform_data; + pdev_data->pdata =dev_get_platdata (&spi->dev);if (!pdev_data->pdata) {dev_err (&spi->dev,"no platform data\n" ); ret = -ENODEV ;
Signature · 1 line
1.7.10.4
PATCH 8/8 wireless: wl12xx: use dev_get_platdata()
In reply to Jingoo HanUse the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability.
--- drivers/net/wireless/ti/wl12xx/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ti/wl12xx/main.c +1 -1
@@ -1704,7 +1704,7 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {static int wl12xx_setup (struct wl1271 *wl) {struct wl12xx_priv *priv = wl->priv; -struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data; +struct wlcore_platdev_data *pdev_data =dev_get_platdata (&wl->pdev->dev);struct wl12xx_platform_data *pdata = pdev_data->pdata; wl->rtable = wl12xx_rtable;
Signature · 1 line
1.7.10.4