arm: qcom: Update ipq5424-rdp466-u-boot.dtsi for v7.1-dts changes
PATCH 1/1 arm: qcom: Update ipq5424-rdp466-u-boot.dtsi for v7.1-dts changes
Once we move to the v7.0-dts tag, we get a failure to build of:
dts/upstream/src/arm64/qcom/ipq5424.dtsi:556.21-573.5: ERROR (phandle_references): /soc@0/mmc@7804000: Reference to non-existent node or label "sdc_default_state"
also defined at arch/arm/dts/ipq5424-rdp466-u-boot.dtsi:20.8-39.4
ERROR: Input tree has errors, aborting (use -f to force output)
Looking over the changes, this appears to be what's required to keep the platform functioning as expected.
---
This file isn't covered by MAINTAINERS directly, so can someone please follow-up and correct that? And, based on looking at the changes between v7.0-dts and v7.1-dts, this would appear to be the right change, but I don't know the platform.
--- arch/arm/dts/ipq5424-rdp466-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/ipq5424-rdp466-u-boot.dtsi +1 -1
@@ -24,7 +24,7 @@ mmc-hs200-1_8v; max-frequency = <192000000>; bus-width = <4>; - pinctrl-0 = <&sdc_default_state>; + pinctrl-0 = <&qpic_snand_default_state>; pinctrl-names = "default"; non-removable;
Signature · 1 line
2.43.0
Can someone confirm this?
Quoted 10 lines · Tom Rini
Once we move to the v7.0-dts tag, we get a failure to build of:
dts/upstream/src/arm64/qcom/ipq5424.dtsi:556.21-573.5: ERROR (phandle_references): /soc@0/mmc@7804000: Reference to non-existent node or label "sdc_default_state"also defined at arch/arm/dts/ipq5424-rdp466-u-boot.dtsi:20.8-39.4ERROR: Input tree has errors, aborting (use -f to force output)
Looking over the changes, this appears to be what's required to keep the platform functioning as expected.
Signed-off-by Tom Rini <[email protected]>
Quoted 25 lines
---
This file isn't covered byMAINTAINERSdirectly, so can someone please follow-up and correct that? And, based on looking at the changes between v7.0-dts and v7.1-dts, this would appear to be the right change, but I don't know the platform.Cc Gurumoorthy Santhakumar <[email protected]>CC Casey Connolly <[email protected]>--- arch/arm/dts/ipq5424-rdp466-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/ipq5424-rdp466-u-boot.dtsi +1
-1@@ -24,7 +24,7 @@ mmc-hs200-1_8v; max-frequency = <192000000>; bus-width = <4>; - pinctrl-0 = <&sdc_default_state>; + pinctrl-0 = <&qpic_snand_default_state>; pinctrl-names = "default"; non-removable;
Quoted 10 lines · Tom Rini
Once we move to the v7.0-dts tag, we get a failure to build of:
dts/upstream/src/arm64/qcom/ipq5424.dtsi:556.21-573.5: ERROR (phandle_references): /soc@0/mmc@7804000: Reference to non-existent node or label "sdc_default_state"also defined at arch/arm/dts/ipq5424-rdp466-u-boot.dtsi:20.8-39.4
ERROR: Input tree has errors, aborting (use -f to force output)Looking over the changes, this appears to be what's required to keep the platform functioning as expected.
[...]
Applied to u-boot/main, thanks!
[1/1] arm: qcom: Update ipq5424-rdp466-u-boot.dtsi for v7.1-dts changes
commit: b9b104e8ddaa81c887872ed078ab17fb39d3465e
Signature · 1 line
Tom