serial: mrst_max3110: fix casting warning

max->port.membase is (unsigned char __iomem *); thus, casting (unsigned char __iomem *) is necessary to fix the following warning. Also, serial_m3110_ops() is staticized.

drivers/tty/serial/mrst_max3110.c:716:17: warning: symbol 'serial_m3110_ops' was not declared. Should it be static? drivers/tty/serial/mrst_max3110.c:847:27: warning: incorrect type in assignment (different address spaces)
drivers/tty/serial/mrst_max3110.c:847:27: expected unsigned char [noderef] <asn:2>*membase
drivers/tty/serial/mrst_max3110.c:847:27: got void *<noident>

---
 drivers/tty/serial/mrst_max3110.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 9b6ef20..a67e708 100644
@@ -713,7 +713,7 @@ static void serial_m3110_enable_ms(struct uart_port *port)
 {
 }
 
-struct uart_ops serial_m3110_ops = {
+static struct uart_ops serial_m3110_ops = {
 	.tx_empty	= serial_m3110_tx_empty,
 	.set_mctrl	= serial_m3110_set_mctrl,
 	.get_mctrl	= serial_m3110_get_mctrl,

@@ -844,7 +844,7 @@ static int serial_m3110_probe(struct spi_device *spi)
 	pmax = max;
 
 	/* Give membase a psudo value to pass serial_core's check */
-	max->port.membase = (void *)0xff110000;
+	max->port.membase = (unsigned char __iomem *)0xff110000;
 	uart_add_one_port(&serial_m3110_reg, &max->port);
 
 	return 0;

1.7.10.4