Skip to contentSkip to conversation

PROBLEM: Full CPU-usage on sis5513-chipset disc input/output-operations

DISCUSSION Robert Hancock 1 participant 1 message Sep 4, 2004 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

I think that at least with relatively current motherboards it makes sense to at least try the APIC support. Speaking of "works in Windows", I think APIC mode has a greater chance of working these days on UP motherboards because Microsoft is pushing motherboard/system manufacturers to support IOAPIC in all new designs:

http://www.microsoft.com/whdc/system/sysperf/IO-APIC.mspx

----- Original Message ----- From: "Daniel Egger" <[email protected]>
Newsgroups: fa.linux.kernel
To: "Alan Cox" <[email protected]>
Cc: "Hendrik Fehr" <[email protected]>; "Linux Kernel Mailing List" <[email protected]>
Sent: Friday, September 03, 2004 11:14 AM
Subject: Re: PROBLEM: Full CPU-usage on sis5513-chipset disc input/output-operations

Quoted 5 lines · Alan Cox

For uniprocessor machines you should avoid building with APIC support in
general anyway. A lot of systems simply don't work with APIC uniprocessor because nobody used to use the APIC in such a configuration.

This statement I don't understand. Wouldn't it be pretty stupid not to use the APIC of modern systems if available to get all the benefits, like additional interrupts? At least my Asus A7V600 refuses to (net-)boot at all without a somewhat recent kernel *and* APIC enabled in BIOS and kernel because the interrupt routing is completely messed up. I'd rather let all users who have APIC problems report on the list and wait until someone fixes the issue instead of having them shut up and use less advanced techniques instead unless you want to get those "but it works in Windows" discussions going...

Servus,
Daniel