Skip to contentSkip to conversation

xwindows login

DISCUSSION Sagar N Chand 5 participants 5 messages Sep 26, 2002 – Sep 27, 2002

lore
Share & tools
lore
#0 lore raw

I've recently installed Mandrake on my system. Everything is well and good. But by default it is going into xwindows for the login. I changed the runlevel to 3 in the etc\inittab file and now it is showing the login in the console mode only. Is there any other way to do this???

regards,
/sagar
------------------------------------------------------------
Applying computer technology is simply finding the
right wrench to pound in the correct screw.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 5 lines · Sagar N Chand

I've recently installed Mandrake on my system. Everything is well and good. But by default it is going into xwindows for the login. I changed the runlevel to 3 in the etc\inittab file and now it is showing the login in the console mode only. Is there any other way to do this???

No that i know off, what is it you really want, you need to login one way or the other.

You can use both tho' simply use runlevel 4 or 5 (dont know what mandrake uses for X) after startup you can go to console mode with ctrl-alt-F6 and login on the console.
ctrl-alt-F2 to return to X.

Quoted 3 lines

regards,
/sagar

Signature · 9 lines
Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
Quoted 7 lines · At 04:03 PM 9/26/02 +0000, pa3gcu wrote:
Quoted 5 lines · Sagar N Chand

I've recently installed Mandrake on my system. Everything is well and good. But by default it is going into xwindows for the login. I changed the runlevel to 3 in the etc\inittab file and now it is showing the login in the console mode only. Is there any other way to do this???

Quoted 7 lines

No that i know off, what is it you really want, you need to login one way or the other.

You can use both tho' simply use runlevel 4 or 5 (dont know what mandrake uses for X) after startup you can go to console mode with ctrl-alt-F6 and login on the console.
ctrl-alt-F2 to return to X.

I missed this one first time through. Richard's solution is a correct one, but there may be another, depending on what *exactly* you mean by "do this".

The other possible solution to running both consoles and X is to start in runlevel 3, then log into a console and start X manually. You usually do this with the command "startx", which is a shell script that sets up some stuff, then calls xinit, the binary that actually starts X. I don't know if a standard Mandrake install sets up startx or if you will need to do some setup manually.

If you do it this way, X will most likely be running on console 7, with tty consoles running on 1-6. As with Richard's approach, you use CTRL-ALT-F7 (or just ALT-F7) to get to X, and CTRL-ALT-F1 to -F6 to get back to the consoles from the X display. (That is, if X is on the displa,y you need CTRL-ALT-Fsomething to switch, but from a command-line tty you can use either CRTL-ALT-Fsomething or ALT-Fsomething to switch consoles).

This is what I catually do on my workstations, BTW ... but I happen not to like xdm as a login mechanism. --
-------------------------------------------"Never tell me the odds!"--------
Ray Olszewski -- Han Solo
Palo Alto, California, USA [email protected]
-------------------------------------------------------------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#3 lore raw
In reply to Sagar N Chand
Quoted 8 lines · Sagar N Chand

I've recently installed Mandrake on my system. Everything is well and good. But by default it is going into xwindows for the login. I changed the runlevel to 3 in the etc\inittab file and now it is showing the login in the console mode only. Is there any other way to do this???

regards,
/sagar

Yes. At runlevel 5, control-alt-F1 through F6 should bring you to a text login, unless Mandrake has gone off the deep end since I messed with it. You know you can start X from runlevel 3 with startx or xinit, right? The user who starts X owns that session(s). Another user could start X on a different display (virtual console) with, say,

xinit -- 1:

That would typically run on tty8, reachable with control-alt-F8, instead of tty7.

Lawson
---oops---

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#4 lore raw
In reply to Sagar N Chand
Quoted 3 lines · Sagar N Chand

I've recently installed Mandrake on my system.
it is going into xwindows for the login. I changed the runlevel to 3 in the etc\inittab file ... Is there any other way to do this???

In textmode %linuxconf , go to boot , go to default boot mode, change default operation mode with <space> .

adriaan

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs