Skip to contentSkip to conversation

i815 Card ...Machine Freezes

DISCUSSION Sid Carter 3 participants 4 messages Nov 25, 2001 – Nov 26, 2001

lore
Share & tools
lore

Sid Carter

author
#0 lore raw

Hi,

My Machine with a Intel i815 card hangs if it is not used for sometime. The monitor goes blank and after sometime if I don't use the machine , the system hangs. I can't even use the power switch to poweroff the machine. I have to pull out the power cable from the back of the machine. Kernel am using is 2.4.14 with SGi's XFS Patch.

And when I am using X, If I switch from X to console and vice-versa more than once, my machine hangs. Is this a known problem ? The logs show no errors at all. Let me know if more info is required.

The relevant output of lspci below:

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 02)

TIA
Regards
Carter

Signature · 3 lines
The only difference between your girlfriend and a barracuda is the nailpolish.

Sid Carter                                                   Debian GNU/Linux.
#1 lore raw

Power Management in the BIOS on or compiled into your Kernel?

Regards,

Jon
----- Original Message -----
From: "Sid Carter" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 25, 2001 1:32 AM
Subject: i815 Card ...Machine Freezes

Quoted 8 lines

Hi,

My Machine with a Intel i815 card hangs if it is not used for sometime. The monitor goes blank and after sometime if I don't use the machine , the system hangs. I can't even use the power switch to poweroff the machine. I have to pull out the power cable from the back of the machine. Kernel am using is 2.4.14 with SGi's XFS Patch.

Quoted 7 lines

And when I am using X, If I switch from X to console and vice-versa more than once, my machine hangs. Is this a known problem ? The logs show no errors at all. Let me know if more info is required.

The relevant output of lspci below:

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory

Controller Hub (rev 02)

Quoted 1 line

00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics

Controller] (rev 02)

Quoted 6 lines

TIA
Regards
Carter
--
The only difference between your girlfriend and a barracuda is the

nailpolish.

Quoted 2 lines

Sid Carter Debian

GNU/Linux.

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

Can reproduce this (2.4.15aa1).
MSI-6215 Booksize, Kernel APM (monolithic kernel, i.e. no modules), no BIOS power management, no X11, no framebuffer, just plain 80x25.
Symptoms: Console blanks but no DPMS blanking (monitor goes not to powersaving mode). The system is online (Internet, ISDN, ppp). Then scanning the system using Nessus locks up the system solid. Nothing happens when there's no ISDN/PPP activity. Didn't try this with LAN activity. No problems with a kernel without any power management support.

Quoted 47 lines · On 25-Nov-2001 Jon wrote:

Power Management in the BIOS on or compiled into your Kernel?

Regards,

Jon
----- Original Message -----
From: "Sid Carter" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 25, 2001 1:32 AM
Subject: i815 Card ...Machine Freezes

Quoted 8 lines

Hi,

My Machine with a Intel i815 card hangs if it is not used for sometime. The monitor goes blank and after sometime if I don't use the machine , the system hangs. I can't even use the power switch to poweroff the machine. I have to pull out the power cable from the back of the machine. Kernel am using is 2.4.14 with SGi's XFS Patch.

Quoted 7 lines

And when I am using X, If I switch from X to console and vice-versa more than once, my machine hangs. Is this a known problem ? The logs show no errors at all. Let me know if more info is required.

The relevant output of lspci below:

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory

Controller Hub (rev 02)

Quoted 1 line

00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics

Controller] (rev 02)

Quoted 6 lines

TIA
Regards
Carter
--
The only difference between your girlfriend and a barracuda is the

nailpolish.

Quoted 2 lines

Sid Carter Debian

GNU/Linux.

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Andreas Steinmetz
D.O.M. Datenverarbeitung GmbH

author
#3 lore raw
In reply to Sid Carter
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Jon

Jon> Power Management in the BIOS on or compiled into your Kernel? Jon> Regards,

>> sometime. The monitor goes blank and after sometime if I don't use the >> machine , the system hangs. I can't even use the power switch to >> poweroff the machine. I have to pull out the power cable from the back >> of the machine. Kernel am using is 2.4.14 with SGi's XFS Patch. >>
>> And when I am using X, If I switch from X to console and vice-versa >> more than once, my machine hangs. Is this a known problem ? The logs >> 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Jon> Controller Hub (rev 02)
>> 00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Jon> Controller] (rev 02)

Hi,
Power Management is enabled in the BIOS *and* compiled into my kernel also.APM is compiled in. I tried to use APIC, but APIC won't poweroff my machine when I halt it, hence use APM. Is this freeze due to APM/Power Management ?
TIA
Regards
Carter

Signature · 3 lines
The only difference between your girlfriend and a barracuda is the nailpolish.

Sid Carter                                                   Debian GNU/Linux.