Skip to contentSkip to conversation

limited upload speed

LARTC emo terziev 3 participants 3 messages Oct 4, 2004

lore
Share & tools
lore
#0 lore raw

HI all,

What is best way to be limited upload speed from LAN users. I read
that it is possible to be done with IMQ interface or with limitation over gateway interface of router(eth0 in my "scheme"), but i cannot chose what is preferred way and need from advice.

Please for advise, any example scripts or URL with tutorial are welcome :)
I read couple times Linux Traffic Control.

                                      -----------------------------
      Internet ISP       --------| eth0             eth1 |-------   LOCAL LAN 
                                      -----------------------------

Best regards
Emo
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

we're doing it over the eth0.. i mean anything that comes from eth1 (upload) is shaped on eth0 when it would leave the router/shaper, and downloads (coming in on eth0) are shaped when it gets router to the users on eth1. Both are using HTB and it works just perfectly fine.
-diab

-
diab
et> What is best way to be limited upload speed from LAN users. I read
et> that it is possible to be done with IMQ interface or with limitation et> over gateway interface of router(eth0 in my "scheme"), but i cannot et> chose what is preferred way and need from advice.

et> Please for advise, any example scripts or URL with tutorial are welcome :) et> I read couple times Linux Traffic Control.

et> -----------------------------
et> Internet ISP --------| eth0 eth1 |------- LOCAL LAN
et> -----------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to emo terziev

If LARTC wasn't enough or too detailed, try Wondershaper.
http://omg.wp.gg/wshaper-howto/

Stephan

-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von emo terziev
Gesendet: Montag, 4. Oktober 2004 10:24
An: LARC
Betreff: [LARTC] limited upload speed

HI all,

What is best way to be limited upload speed from LAN users. I read
that it is possible to be done with IMQ interface or with limitation over gateway interface of router(eth0 in my "scheme"), but i cannot chose what is preferred way and need from advice.

Please for advise, any example scripts or URL with tutorial are welcome :)
I read couple times Linux Traffic Control.

                                      -----------------------------
      Internet ISP       --------| eth0             eth1 |-------
LOCAL LAN 
                                      -----------------------------

Best regards
Emo

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/