Skip to contentSkip to conversation

Add networkd as default for RaspberryPi

PATCH In review Herve Jourdain 4 participants 12 messages Jul 23, 2015 – Jul 29, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add networkd as default for RaspberryPi

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

<mailto:[email protected]> >

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

@@ -0,0 +1,6 @@

+[Match]

+Name=eth*

+

+[Network]

+DHCP=v4

+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800

@@ -0,0 +1,17 @@

+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

+

+EXTRA_OECONF += "--disable-ldconfig"

+

+PACKAGECONFIG += "networkd resolved"

+

+CFLAGS_append_arm = " -fno-lto"

+

+SRC_URI += "file://eth.network"

+

+FILES_${PN} += "{sysconfdir}/systemd/network/*"

+

+do_install_append() {

+ install -d ${D}${sysconfdir}/systemd/network/

+ install -m 0644 ${WORKDIR}/*.network ${D}${sysconfdir}/systemd/network/

+}

+

#1 lore raw

Em Thu, 23 Jul 2015 17:32:35 +0200
Herve Jourdain <[email protected]> escreveu:

Quoted 11 lines

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

I guess putting it at BSP is not right. Ethernet network does work on Tizen on Yocto:
http://blogs.s-osg.org/tizen-rpi2-now-supporting-3d-acceleration/

Regards,
Mauro

Quoted 78 lines

<mailto:[email protected]> >

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

(quoted diff) +6 -0
@@ -0,0 +1,6 @@
 
+[Match]
 
+Name=eth*
 
+
 
+[Network]
 
+DHCP=v4
 
+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800
(quoted diff) +17 -0
@@ -0,0 +1,17 @@
 
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
+
 
+EXTRA_OECONF += "--disable-ldconfig"
 
+
 
+PACKAGECONFIG += "networkd resolved"
 
+
 
+CFLAGS_append_arm = " -fno-lto"
 
+
 
+SRC_URI += "file://eth.network"
 
+
 
+FILES_${PN} += "{sysconfdir}/systemd/network/*"
 
+
 
+do_install_append() {
 
+    install -d ${D}${sysconfdir}/systemd/network/
 
+    install -m 0644 ${WORKDIR}/*.network ${D}${sysconfdir}/systemd/network/
 
+}
 
+
#2 lore raw

Hi Mauro,

Well, that's precisely one of my concerns. I believe that one of the Tizen layers might do just that. Maybe it should be at the Yocto layer.
But it seems not to be with the one I'm using. And just enabling system - which can be done at distro level - is not enough, there is a need for a bbappend and a config file. So honestly, since I was experimenting with system, I stumbled on this one, and I had initially put that patch in another layer - custom one.

The question that remains is how do we make sure that Poky on raspberry pi has network enabled by default when people switch to system? Since I don't know where else to put it, I decided to propose the patch for the raspberrypi layer, knowing it probably makes more sense to put it somewhere else.

BR,

Herve

-----Original Message-----
From: Mauro Carvalho Chehab [mailto:[email protected]]
Sent: jeudi 23 juillet 2015 18:00
To: Herve Jourdain
Cc: 'Andrei Gherzan'; 'Petter Mabäcker'; [email protected]
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

Em Thu, 23 Jul 2015 17:32:35 +0200
Herve Jourdain <[email protected]> escreveu:

Quoted 11 lines

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

I guess putting it at BSP is not right. Ethernet network does work on Tizen on Yocto:
http://blogs.s-osg.org/tizen-rpi2-now-supporting-3d-acceleration/

Regards,
Mauro

Quoted 81 lines

<mailto:[email protected]> >

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

(quoted diff) +6 -0
@@ -0,0 +1,6 @@
 
+[Match]
 
+Name=eth*
 
+
 
+[Network]
 
+DHCP=v4
 
+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800
(quoted diff) +18 -0
@@ -0,0 +1,17 @@
 
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
+
 
+EXTRA_OECONF += "--disable-ldconfig"
 
+
 
+PACKAGECONFIG += "networkd resolved"
 
+
 
+CFLAGS_append_arm = " -fno-lto"
 
+
 
+SRC_URI += "file://eth.network"
 
+
 
+FILES_${PN} += "{sysconfdir}/systemd/network/*"
 
+
 
+do_install_append() {
 
+    install -d ${D}${sysconfdir}/systemd/network/
 
+    install -m 0644 ${WORKDIR}/*.network 
+ ${D}${sysconfdir}/systemd/network/
 
+}
 
+
#3 lore raw

Em Thu, 23 Jul 2015 18:25:29 +0200
Herve Jourdain <[email protected]> escreveu:

Quoted 3 lines

Hi Mauro,

Well, that's precisely one of my concerns. I believe that one of the Tizen layers might do just that.

Yes, it does. It is at the meta-tizen layer.

Quoted 6 lines

Maybe it should be at the Yocto layer.

But it seems not to be with the one I'm using. And just enabling system - which can be done at distro level - is not enough, there is a need for a bbappend and a config file. So honestly, since I was experimenting with system, I stumbled on this one, and I had initially put that patch in another layer - custom one.

The question that remains is how do we make sure that Poky on raspberry pi has network enabled by default when people switch to system? Since I don't know where else to put it, I decided to propose the patch for the raspberrypi layer, knowing it probably makes more sense to put it somewhere else.

I'd say that it should not be at the Yocto layer, but at the layer specific for your distribution.

Quoted 116 lines

BR,

Herve

-----Original Message-----
From: Mauro Carvalho Chehab [mailto:[email protected]]
Sent: jeudi 23 juillet 2015 18:00
To: Herve Jourdain
Cc: 'Andrei Gherzan'; 'Petter Mabäcker'; [email protected]
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

Em Thu, 23 Jul 2015 17:32:35 +0200
Herve Jourdain <[email protected]> escreveu:

Quoted 11 lines

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

I guess putting it at BSP is not right. Ethernet network does work on Tizen on Yocto:
http://blogs.s-osg.org/tizen-rpi2-now-supporting-3d-acceleration/

Regards,
Mauro

Quoted 81 lines

<mailto:[email protected]> >

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

(quoted diff) +6 -0
@@ -0,0 +1,6 @@
 
+[Match]
 
+Name=eth*
 
+
 
+[Network]
 
+DHCP=v4
 
+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800
(quoted diff) +18 -0
@@ -0,0 +1,17 @@
 
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
+
 
+EXTRA_OECONF += "--disable-ldconfig"
 
+
 
+PACKAGECONFIG += "networkd resolved"
 
+
 
+CFLAGS_append_arm = " -fno-lto"
 
+
 
+SRC_URI += "file://eth.network"
 
+
 
+FILES_${PN} += "{sysconfdir}/systemd/network/*"
 
+
 
+do_install_append() {
 
+    install -d ${D}${sysconfdir}/systemd/network/
 
+    install -m 0644 ${WORKDIR}/*.network 
+ ${D}${sysconfdir}/systemd/network/
 
+}
 
+
#4 lore raw

Well, I'm using Poky as a "distribution", at least for my tests...
But there might be a reason why it's not included there, I believe.
The problem to include it at the distribution level is you need to make assumptions as to what kind of network/network interfaces will be found. On a raspberrypi, we know there will be at least an Ethernet available, so starting networkd and resolved makes sense.
But at the Poky distribution level, it can run on any kind of hardware, including those without any network capability.
So I believe it can't really be easily done at the distribution layer itself either, unless there is some kind of understanding networking will be required.

Therefore, my problem: if we want raspberrypi to start network out of the box, because we know it has the HW to support it, then we should do something at the raspberrypi layer, if it can not be supported at the distribution layer.

As I mentioned, I had initially kept that in a custom layer of mine.
But if it stays there, that means anyone starting poky on a raspberrypi using system will have to do its own layer with the bbappend, similar to that. So I'm trying to find a way to make this work out of the box, with systemd, on raspberrypi, for everyone, and I'm not sure what's the best way to achieve this indeed.

BR,

Herve

-----Original Message-----
From: Mauro Carvalho Chehab [mailto:[email protected]]
Sent: jeudi 23 juillet 2015 20:28
To: Herve Jourdain
Cc: 'Andrei Gherzan'; 'Petter Mabäcker'; [email protected]
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

Em Thu, 23 Jul 2015 18:25:29 +0200
Herve Jourdain <[email protected]> escreveu:

Quoted 3 lines

Hi Mauro,

Well, that's precisely one of my concerns. I believe that one of the Tizen layers might do just that.

Yes, it does. It is at the meta-tizen layer.

Quoted 6 lines

Maybe it should be at the Yocto layer.

But it seems not to be with the one I'm using. And just enabling system - which can be done at distro level - is not enough, there is a need for a bbappend and a config file. So honestly, since I was experimenting with system, I stumbled on this one, and I had initially put that patch in another layer - custom one.

The question that remains is how do we make sure that Poky on raspberry pi has network enabled by default when people switch to system? Since I don't know where else to put it, I decided to propose the patch for the raspberrypi layer, knowing it probably makes more sense to put it somewhere else.

I'd say that it should not be at the Yocto layer, but at the layer specific for your distribution.

Quoted 117 lines

BR,

Herve

-----Original Message-----
From: Mauro Carvalho Chehab [mailto:[email protected]]
Sent: jeudi 23 juillet 2015 18:00
To: Herve Jourdain
Cc: 'Andrei Gherzan'; 'Petter Mabäcker'; [email protected]
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

Em Thu, 23 Jul 2015 17:32:35 +0200
Herve Jourdain <[email protected]> escreveu:

Quoted 11 lines

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

I guess putting it at BSP is not right. Ethernet network does work on Tizen on Yocto:
http://blogs.s-osg.org/tizen-rpi2-now-supporting-3d-acceleration/

Regards,
Mauro

Quoted 81 lines

<mailto:[email protected]> >

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

(quoted diff) +6 -0
@@ -0,0 +1,6 @@
 
+[Match]
 
+Name=eth*
 
+
 
+[Network]
 
+DHCP=v4
 
+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800
(quoted diff) +18 -0
@@ -0,0 +1,17 @@
 
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
+
 
+EXTRA_OECONF += "--disable-ldconfig"
 
+
 
+PACKAGECONFIG += "networkd resolved"
 
+
 
+CFLAGS_append_arm = " -fno-lto"
 
+
 
+SRC_URI += "file://eth.network"
 
+
 
+FILES_${PN} += "{sysconfdir}/systemd/network/*"
 
+
 
+do_install_append() {
 
+    install -d ${D}${sysconfdir}/systemd/network/
 
+    install -m 0644 ${WORKDIR}/*.network 
+ ${D}${sysconfdir}/systemd/network/
 
+}
 
+
#5 lore raw
Quoted 2 lines · Herve Jourdain

But there might be a reason why it's not included there, I believe.

Because Poky is a reference distribution, primarily for QA, that doesn't explicitly support the Raspberry Pi and certainly doesn't expect to be used outside of QA purposes.

Inventing your own distribution is trivial (in fact, you don't even need one) and is exactly the sort of place that this sort of logic belongs.

Ross

#6 lore raw

Hi Ross,

Yes, this is exactly what I assumed – I know, too many assumptions…

The point is that many people are turning to Poky for generating their first Yocto-based distribution for RaspberryPi. And out of the box, if using system, the network part doesn’t work.

That’s why I was trying to “solve” that at the meta-raspberrypi layer, instead of having each and everyone do it again at a personal level.

And I definitely understand meta-raspberrypi might not be perfect for that – but where else to put it, with the goal of having everyone using meta-raspberrypi have network enabled out of the box when using system on a Poky distribution?

Maybe it’s just not possible, that could be a valid answer as well.

BR,

Hervé

From: Burton, Ross [mailto:[email protected]]
Sent: vendredi 24 juillet 2015 00:52
To: Herve Jourdain
Cc: Mauro Carvalho Chehab; [email protected]
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

On 23 July 2015 at 23:45, Herve Jourdain <[email protected] <mailto:[email protected]> > wrote:

But there might be a reason why it's not included there, I believe.

Because Poky is a reference distribution, primarily for QA, that doesn't explicitly support the Raspberry Pi and certainly doesn't expect to be used outside of QA purposes.

Inventing your own distribution is trivial (in fact, you don't even need one) and is exactly the sort of place that this sort of logic belongs.

Ross

#7 lore raw
Quoted 5 lines · Herve Jourdain

The point is that many people are turning to Poky for generating their first Yocto-based distribution for RaspberryPi. And out of the box, if using system, the network part doesn’t work.

Are these users building images that contain connman? If that doesn't work out of the box on RPi, that's a bug (and the last time I tried it, it worked fine).

Ross

#8 lore raw
In reply to Herve Jourdain
Quoted 75 lines · Herve Jourdain

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

(quoted diff) +6 -0
@@ -0,0 +1,6 @@
 
+[Match]
 
+Name=eth*
 
+
 
+[Network]
 
+DHCP=v4
 
+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800
(quoted diff) +12 -0
@@ -0,0 +1,17 @@
 
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
+
 
+EXTRA_OECONF += "--disable-ldconfig"
 
+
 
+PACKAGECONFIG += "networkd resolved"
 
+
 
+CFLAGS_append_arm = " -fno-lto"
 
+
 
+SRC_URI += "file://eth.network"
 
+
 
+FILES_${PN} += "{sysconfdir}/systemd/network/*"
 
+

Review

Quoted 10 lines
(quoted diff) +5 -0
 
+do_install_append() {
 
+    install -d ${D}${sysconfdir}/systemd/network/
 
+    install -m 0644 ${WORKDIR}/*.network ${D}${sysconfdir}/systemd/network/
 
+}
 
+

Please don't modify these kind of settings in a BSP. Even worse by doing it as suggested all machines will get this modification. This for sake that you have no network. Why not add networkmanager or whatever and being fine?

Andreas

#9 lore raw

Indeed, it's a valid point, and I should probably be more cautious in the naming of the bbappend.
This said, I - maybe wrongfully - assumed that anyone including the meta-raspberrypi layer would actually want to run on a raspberrypi, which does have an Ethernet interface I believe on all machines - I only have a RaspberryPi 2, so I didn't check all other devices, so might assumption might be wrong there. Is there any version of raspberrypi without an Ethernet interface?

BR,

Herve

-----Original Message-----
From: Andreas Müller [mailto:[email protected]]
Sent: jeudi 23 juillet 2015 18:39
To: Herve Jourdain
Cc: Andrei Gherzan; Petter Mabäcker; Yocto Project
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

Quoted 78 lines · Herve Jourdain

This patch adds systemd-networkd for RaspberryPi in the meta-raspberrypi layer, in order to have Ethernet and Networking work out of the box.

This said, I’m not 100% sure if it should be enabled in meta-raspberrypi, instead of another custom layer.

But something similar needs to be added somewhere, and with the current version of Yocto on RaspberryPi, without this patch, network just doesn’t start…

---

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/files/eth.network meta-raspberrypi/recipes-core/systemd/files/eth.network

--- meta-raspberrypi.orig/recipes-core/systemd/files/eth.network

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/files/eth.network 2015-07-22
12:01:53.587830690 +0800

(quoted diff) +6 -0
@@ -0,0 +1,6 @@
 
+[Match]
 
+Name=eth*
 
+
 
+[Network]
 
+DHCP=v4
 
+

diff -Naur meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

--- meta-raspberrypi.orig/recipes-core/systemd/systemd_%.bbappend

1970-01-01 08:00:00.000000000 +0800

+++ meta-raspberrypi/recipes-core/systemd/systemd_%.bbappend

2015-07-22 12:05:07.307838546 +0800
(quoted diff) +12 -0
@@ -0,0 +1,17 @@
 
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
+
 
+EXTRA_OECONF += "--disable-ldconfig"
 
+
 
+PACKAGECONFIG += "networkd resolved"
 
+
 
+CFLAGS_append_arm = " -fno-lto"
 
+
 
+SRC_URI += "file://eth.network"
 
+
 
+FILES_${PN} += "{sysconfdir}/systemd/network/*"
 
+
 

Review

Quoted 10 lines
(quoted diff) +6 -0
+do_install_append() {
 
+    install -d ${D}${sysconfdir}/systemd/network/
 
+    install -m 0644 ${WORKDIR}/*.network 
+ ${D}${sysconfdir}/systemd/network/
 
+}
 
+

Please don't modify these kind of settings in a BSP. Even worse by doing it as suggested all machines will get this modification. This for sake that you have no network. Why not add networkmanager or whatever and being fine?

Andreas

#10 lore raw
Quoted 7 lines · Herve Jourdain

This said, I - maybe wrongfully - assumed that anyone including the meta-raspberrypi layer would actually want to run on a raspberrypi, which does have an Ethernet interface I believe on all machines - I only have a RaspberryPi 2, so I didn't check all other devices, so might assumption might be wrong there.
Is there any version of raspberrypi without an Ethernet interface?

Certainly wrongly. For example the Guacamayo distro includes BSP layers from meta-yocto-bsp, meta-ti, meta-raspberrypi, and meta-intel. BSP layers should always scope their changes to impact only the machines they care about.

Ross

#11 lore raw

Hi Ross,

OK, I get it. I will be more careful in correctly restricting patches to the machine targeted, if there are machine dependencies.

BR,

Herve

From: Burton, Ross [mailto:[email protected]]
Sent: vendredi 24 juillet 2015 00:54
To: Herve Jourdain
Cc: Andreas Müller; Yocto Project
Subject: Re: [yocto] [meta-raspberrypi][PATCH] Add networkd as default for RaspberryPi

On 23 July 2015 at 23:50, Herve Jourdain <[email protected] <mailto:[email protected]> > wrote:

This said, I - maybe wrongfully - assumed that anyone including the meta-raspberrypi layer would actually want to run on a raspberrypi, which does have an Ethernet interface I believe on all machines - I only have a RaspberryPi 2, so I didn't check all other devices, so might assumption might be wrong there. Is there any version of raspberrypi without an Ethernet interface?

Certainly wrongly. For example the Guacamayo distro includes BSP layers from meta-yocto-bsp, meta-ti, meta-raspberrypi, and meta-intel. BSP layers should always scope their changes to impact only the machines they care about.

Ross