Skip to contentSkip to conversation

Clock has stopped (time/date looping over 5 secon

DISCUSSION Roland 2 participants 2 messages Apr 8, 2008 – Apr 16, 2008

lore
Share & tools
lore

Roland

author
#0 lore raw
Quoted 4 lines

It _appears_ that there is a race in the kernel that can be triggered by any number of hardware issues. There's another thread by Gregory Stark with the same symptoms - he thinks his was fixed by replacing a bad DIMM.

id like to mention that we may have a repro-case (if its the same issue i hit within vmware):

see http://communities.vmware.com/message/909403

regards
roland

#1 lore raw
Quoted 10 lines · Roland
Quoted 5 lines

It _appears_ that there is a race in the kernel that can be triggered by any number of hardware issues. There's another thread by Gregory Stark with the same symptoms - he thinks his was fixed by replacing a bad DIMM.

id like to mention that we may have a repro-case (if its the same issue i
hit within vmware):

see http://communities.vmware.com/message/909403

The looping ~5seconds sounds like nanosecond overflows. Might it be that vmware isn't delivering timer interrupts? Could this be an interaction w/ hrt or no_hz?

thanks
-john